net: introduce IFF_UNICAST_FLT private flag

Use IFF_UNICAST_FTL to find out if driver handles unicast address
filtering. In case it does not, promisc mode is entered.

Patch also fixes following drivers:
stmmac, niu: support uc filtering and yet it propagated
	ndo_set_multicast_list
bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set
	ndo_set_rx_mode but do not support uc filtering

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jiri Pirko 2011-08-16 06:29:00 +00:00 committed by David S. Miller
parent d03462b999
commit 01789349ee
17 changed files with 51 additions and 12 deletions

View file

@ -36,6 +36,7 @@
#include <linux/time.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <net/ip.h>
#include <net/tcp.h>
@ -8370,6 +8371,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->vlan_features = dev->hw_features;
dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->features |= dev->hw_features;
dev->priv_flags |= IFF_UNICAST_FLT;
if ((rc = register_netdev(dev))) {
dev_err(&pdev->dev, "Cannot register net device\n");

View file

@ -39,6 +39,7 @@
#include <linux/time.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <net/ip.h>
#include <net/ipv6.h>
@ -10266,6 +10267,8 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
dev->netdev_ops = &bnx2x_netdev_ops;
bnx2x_set_ethtool_ops(dev);
dev->priv_flags |= IFF_UNICAST_FLT;
dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;

View file

@ -41,6 +41,7 @@
#include <linux/err.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/init.h>
#include <linux/log2.h>
@ -3639,6 +3640,8 @@ static int __devinit init_one(struct pci_dev *pdev,
netdev->features |= netdev->hw_features | highdma;
netdev->vlan_features = netdev->features & VLAN_FEAT;
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->netdev_ops = &cxgb4_netdev_ops;
SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
}

View file

@ -2625,6 +2625,8 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->netdev_ops = &cxgb4vf_netdev_ops;
SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops);

View file

@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/ethtool.h>
@ -2442,6 +2443,8 @@ static int __devinit enic_probe(struct pci_dev *pdev,
if (using_dac)
netdev->features |= NETIF_F_HIGHDMA;
netdev->priv_flags |= IFF_UNICAST_FLT;
err = register_netdev(netdev);
if (err) {
dev_err(dev, "Cannot register net device, aborting\n");

View file

@ -1080,6 +1080,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
netdev->vlan_features |= NETIF_F_HW_CSUM;
netdev->vlan_features |= NETIF_F_SG;
netdev->priv_flags |= IFF_UNICAST_FLT;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
/* initialize eeprom parameters */

View file

@ -39,6 +39,7 @@
#include <linux/net_tstamp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
@ -1973,6 +1974,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
netdev->features |= NETIF_F_SCTP_CSUM;
}
netdev->priv_flags |= IFF_UNICAST_FLT;
adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
/* before reading the NVM, reset the controller to put the device in a

View file

@ -42,6 +42,7 @@
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/ethtool.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/prefetch.h>
#include <scsi/fc/fc_fcoe.h>
@ -7527,6 +7528,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->vlan_features |= NETIF_F_IPV6_CSUM;
netdev->vlan_features |= NETIF_F_SG;
netdev->priv_flags |= IFF_UNICAST_FLT;
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
IXGBE_FLAG_DCB_ENABLED);

View file

@ -44,6 +44,7 @@
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/ethtool.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/prefetch.h>
@ -3358,6 +3359,8 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
netdev->priv_flags |= IFF_UNICAST_FLT;
/* The HW MAC address was set and/or determined in sw_init */
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);

View file

@ -2923,6 +2923,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM;
dev->priv_flags |= IFF_UNICAST_FLT;
SET_NETDEV_DEV(dev, &pdev->dev);
if (mp->shared->win_protect)

View file

@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/slab.h>
#include <linux/phy.h>
@ -1102,6 +1103,8 @@ static int __devinit octeon_mgmt_probe(struct platform_device *pdev)
tasklet_init(&p->tx_clean_tasklet,
octeon_mgmt_clean_tx_tasklet, (unsigned long)p);
netdev->priv_flags |= IFF_UNICAST_FLT;
netdev->netdev_ops = &octeon_mgmt_ops;
netdev->ethtool_ops = &octeon_mgmt_ethtool_ops;

View file

@ -42,6 +42,7 @@
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
@ -1284,7 +1285,7 @@ static int stmmac_config(struct net_device *dev, struct ifmap *map)
}
/**
* stmmac_multicast_list - entry point for multicast addressing
* stmmac_set_rx_mode - entry point for multicast addressing
* @dev : pointer to the device structure
* Description:
* This function is a driver entry point which gets called by the kernel
@ -1292,7 +1293,7 @@ static int stmmac_config(struct net_device *dev, struct ifmap *map)
* Return value:
* void.
*/
static void stmmac_multicast_list(struct net_device *dev)
static void stmmac_set_rx_mode(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
@ -1421,7 +1422,7 @@ static const struct net_device_ops stmmac_netdev_ops = {
.ndo_stop = stmmac_release,
.ndo_change_mtu = stmmac_change_mtu,
.ndo_fix_features = stmmac_fix_features,
.ndo_set_multicast_list = stmmac_multicast_list,
.ndo_set_rx_mode = stmmac_set_rx_mode,
.ndo_tx_timeout = stmmac_tx_timeout,
.ndo_do_ioctl = stmmac_ioctl,
.ndo_set_config = stmmac_config,
@ -1498,10 +1499,12 @@ static int stmmac_mac_device_setup(struct net_device *dev)
struct mac_device_info *device;
if (priv->plat->has_gmac)
if (priv->plat->has_gmac) {
dev->priv_flags |= IFF_UNICAST_FLT;
device = dwmac1000_setup(priv->ioaddr);
else
} else {
device = dwmac100_setup(priv->ioaddr);
}
if (!device)
return -ENOMEM;

View file

@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/mii.h>
#include <linux/if.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
@ -9716,7 +9717,7 @@ static const struct net_device_ops niu_netdev_ops = {
.ndo_stop = niu_close,
.ndo_start_xmit = niu_start_xmit,
.ndo_get_stats64 = niu_get_stats,
.ndo_set_multicast_list = niu_set_rx_mode,
.ndo_set_rx_mode = niu_set_rx_mode,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = niu_set_mac_addr,
.ndo_do_ioctl = niu_ioctl,
@ -9852,6 +9853,8 @@ static int __devinit niu_pci_init_one(struct pci_dev *pdev,
niu_set_basic_features(dev);
dev->priv_flags |= IFF_UNICAST_FLT;
np->regs = pci_ioremap_bar(pdev, 0);
if (!np->regs) {
dev_err(&pdev->dev, "Cannot map device registers, aborting\n");

View file

@ -949,6 +949,7 @@ static int virtnet_probe(struct virtio_device *vdev)
return -ENOMEM;
/* Set up network device as normal. */
dev->priv_flags |= IFF_UNICAST_FLT;
dev->netdev_ops = &virtnet_netdev;
dev->features = NETIF_F_HIGHDMA;

View file

@ -78,6 +78,7 @@
* datapath port */
#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing
* skbs on transmit */
#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002

View file

@ -723,6 +723,8 @@ struct netdev_tc_txq {
*
* void (*ndo_set_rx_mode)(struct net_device *dev);
* This function is called device changes address list filtering.
* If driver handles unicast address filtering, it should set
* IFF_UNICAST_FLT to its priv_flags.
*
* void (*ndo_set_multicast_list)(struct net_device *dev);
* This function is called when the multicast address list changes.

View file

@ -4522,9 +4522,7 @@ void __dev_set_rx_mode(struct net_device *dev)
if (!netif_device_present(dev))
return;
if (ops->ndo_set_rx_mode)
ops->ndo_set_rx_mode(dev);
else {
if (!(dev->priv_flags & IFF_UNICAST_FLT)) {
/* Unicast addresses changes may only happen under the rtnl,
* therefore calling __dev_set_promiscuity here is safe.
*/
@ -4535,10 +4533,12 @@ void __dev_set_rx_mode(struct net_device *dev)
__dev_set_promiscuity(dev, -1);
dev->uc_promisc = false;
}
if (ops->ndo_set_multicast_list)
ops->ndo_set_multicast_list(dev);
}
if (ops->ndo_set_rx_mode)
ops->ndo_set_rx_mode(dev);
else if (ops->ndo_set_multicast_list)
ops->ndo_set_multicast_list(dev);
}
void dev_set_rx_mode(struct net_device *dev)