sl82c105: remove no longer needed ->selectproc method

* Program register 0x40 in sl82c105_resetproc().

* Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2008-01-26 20:12:59 +01:00
parent 6ae8b1efcc
commit 08590556d6

View file

@ -218,36 +218,9 @@ static int sl82c105_dma_end(ide_drive_t *drive)
return ret;
}
/*
* Ok, that is nasty, but we must make sure the DMA timings
* won't be used for a PIO access. The solution here is
* to make sure the 16 bits mode is diabled on the channel
* when DMA is enabled, thus causing the chip to use PIO0
* timings for those operations.
*/
static void sl82c105_selectproc(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u32 val, old, mask;
//DBG(("sl82c105_selectproc(drive:%s)\n", drive->name));
mask = hwif->channel ? CTRL_P1F16 : CTRL_P0F16;
old = val = (u32)pci_get_drvdata(dev);
if (drive->using_dma)
val &= ~mask;
else
val |= mask;
if (old != val) {
pci_write_config_dword(dev, 0x40, val);
pci_set_drvdata(dev, (void *)val);
}
}
/*
* ATA reset will clear the 16 bits mode in the control
* register, we need to update our cache
* register, we need to reprogram it
*/
static void sl82c105_resetproc(ide_drive_t *drive)
{
@ -257,7 +230,8 @@ static void sl82c105_resetproc(ide_drive_t *drive)
DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
pci_read_config_dword(dev, 0x40, &val);
pci_set_drvdata(dev, (void *)val);
val |= (CTRL_P1F16 | CTRL_P0F16);
pci_write_config_dword(dev, 0x40, val);
}
/*
@ -310,7 +284,6 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
pci_set_drvdata(dev, (void *)val);
return dev->irq;
}
@ -326,7 +299,6 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->set_dma_mode = &sl82c105_set_dma_mode;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
if (!hwif->dma_base)