synopsys: remove dwc_eth_qos driver

This driver is no longer necessary since it was merged into stmmac.

Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -10864,13 +10864,6 @@ F:	include/linux/dma/dw.h
 F:	include/linux/platform_data/dma-dw.h
 F:	drivers/dma/dw/
 
-SYNOPSYS DESIGNWARE ETHERNET QOS 4.10a driver
-M: Lars Persson <lars.persson@axis.com>
-L: netdev@vger.kernel.org
-S: Supported
-F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
-F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
-
 SYNOPSYS DESIGNWARE I2C DRIVER
 M:	Jarkko Nikula <jarkko.nikula@linux.intel.com>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>

arch/arm/configs/multi_v7_defconfig

@@ -253,7 +253,8 @@ CONFIG_R8169=y
 CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
-CONFIG_SYNOPSYS_DWC_ETH_QOS=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
 CONFIG_TI_CPSW=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_AT803X_PHY=y

drivers/net/ethernet/Kconfig

@@ -170,7 +170,6 @@ source "drivers/net/ethernet/sgi/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
-source "drivers/net/ethernet/synopsys/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
 source "drivers/net/ethernet/ti/Kconfig"
 source "drivers/net/ethernet/tile/Kconfig"

drivers/net/ethernet/Makefile

@@ -81,7 +81,6 @@ obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
-obj-$(CONFIG_NET_VENDOR_SYNOPSYS) += synopsys/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
 obj-$(CONFIG_NET_VENDOR_TI) += ti/
 obj-$(CONFIG_TILE_NET) += tile/

drivers/net/ethernet/synopsys/Kconfig

@@ -1,27 +0,0 @@
-#
-# Synopsys network device configuration
-#
-
-config NET_VENDOR_SYNOPSYS
-	bool "Synopsys devices"
-	default y
-	---help---
-	  If you have a network (Ethernet) device belonging to this class, say Y.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Synopsys devices. If you say Y, you will be asked
-	  for your specific device in the following questions.
-
-if NET_VENDOR_SYNOPSYS
-
-config SYNOPSYS_DWC_ETH_QOS
-	tristate "Sypnopsys DWC Ethernet QOS v4.10a support"
-	select PHYLIB
-	select CRC32
-	select MII
-	depends on OF && HAS_DMA
-	---help---
-	  This driver supports the DWC Ethernet QoS from Synopsys
-
-endif # NET_VENDOR_SYNOPSYS

drivers/net/ethernet/synopsys/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the Synopsys network device drivers.
-#
-
-obj-$(CONFIG_SYNOPSYS_DWC_ETH_QOS) += dwc_eth_qos.o