netfilter: ebtables: make BRIDGE_NF_EBTABLES a menuconfig option

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This commit is contained in:
Jan Engelhardt 2008-10-08 11:35:17 +02:00 committed by Patrick McHardy
parent 2203eb4760
commit 20f3c56f4d

View file

@ -2,22 +2,21 @@
# Bridge netfilter configuration
#
menu "Bridge: Netfilter Configuration"
depends on BRIDGE && BRIDGE_NETFILTER
config BRIDGE_NF_EBTABLES
menuconfig BRIDGE_NF_EBTABLES
tristate "Ethernet Bridge tables (ebtables) support"
select NETFILTER_XTABLES
help
ebtables is a general, extensible frame/packet identification
framework. Say 'Y' or 'M' here if you want to do Ethernet
filtering/NAT/brouting on the Ethernet bridge.
if BRIDGE_NF_EBTABLES
#
# tables
#
config BRIDGE_EBT_BROUTE
tristate "ebt: broute table support"
depends on BRIDGE_NF_EBTABLES
help
The ebtables broute table is used to define rules that decide between
bridging and routing frames, giving Linux the functionality of a
@ -28,7 +27,6 @@ config BRIDGE_EBT_BROUTE
config BRIDGE_EBT_T_FILTER
tristate "ebt: filter table support"
depends on BRIDGE_NF_EBTABLES
help
The ebtables filter table is used to define frame filtering rules at
local input, forwarding and local output. See the man page for
@ -38,7 +36,6 @@ config BRIDGE_EBT_T_FILTER
config BRIDGE_EBT_T_NAT
tristate "ebt: nat table support"
depends on BRIDGE_NF_EBTABLES
help
The ebtables nat table is used to define rules that alter the MAC
source address (MAC SNAT) or the MAC destination address (MAC DNAT).
@ -50,7 +47,6 @@ config BRIDGE_EBT_T_NAT
#
config BRIDGE_EBT_802_3
tristate "ebt: 802.3 filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds matching support for 802.3 Ethernet frames.
@ -58,7 +54,6 @@ config BRIDGE_EBT_802_3
config BRIDGE_EBT_AMONG
tristate "ebt: among filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the among match, which allows matching the MAC source
and/or destination address on a list of addresses. Optionally,
@ -68,7 +63,6 @@ config BRIDGE_EBT_AMONG
config BRIDGE_EBT_ARP
tristate "ebt: ARP filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the ARP match, which allows ARP and RARP header field
filtering.
@ -77,7 +71,6 @@ config BRIDGE_EBT_ARP
config BRIDGE_EBT_IP
tristate "ebt: IP filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the IP match, which allows basic IP header field
filtering.
@ -95,7 +88,6 @@ config BRIDGE_EBT_IP6
config BRIDGE_EBT_LIMIT
tristate "ebt: limit match support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the limit match, which allows you to control
the rate at which a rule can be matched. This match is the
@ -106,7 +98,6 @@ config BRIDGE_EBT_LIMIT
config BRIDGE_EBT_MARK
tristate "ebt: mark filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the mark match, which allows matching frames based on
the 'nfmark' value in the frame. This can be set by the mark target.
@ -117,7 +108,6 @@ config BRIDGE_EBT_MARK
config BRIDGE_EBT_PKTTYPE
tristate "ebt: packet type filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the packet type match, which allows matching on the
type of packet based on its Ethernet "class" (as determined by
@ -128,7 +118,6 @@ config BRIDGE_EBT_PKTTYPE
config BRIDGE_EBT_STP
tristate "ebt: STP filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the Spanning Tree Protocol match, which
allows STP header field filtering.
@ -137,7 +126,6 @@ config BRIDGE_EBT_STP
config BRIDGE_EBT_VLAN
tristate "ebt: 802.1Q VLAN filter support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the 802.1Q vlan match, which allows the filtering of
802.1Q vlan fields.
@ -157,7 +145,6 @@ config BRIDGE_EBT_ARPREPLY
config BRIDGE_EBT_DNAT
tristate "ebt: dnat target support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the MAC DNAT target, which allows altering the MAC
destination address of frames.
@ -166,7 +153,6 @@ config BRIDGE_EBT_DNAT
config BRIDGE_EBT_MARK_T
tristate "ebt: mark target support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the mark target, which allows marking frames by
setting the 'nfmark' value in the frame.
@ -177,7 +163,6 @@ config BRIDGE_EBT_MARK_T
config BRIDGE_EBT_REDIRECT
tristate "ebt: redirect target support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the MAC redirect target, which allows altering the MAC
destination address of a frame to that of the device it arrived on.
@ -186,7 +171,6 @@ config BRIDGE_EBT_REDIRECT
config BRIDGE_EBT_SNAT
tristate "ebt: snat target support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the MAC SNAT target, which allows altering the MAC
source address of frames.
@ -197,7 +181,6 @@ config BRIDGE_EBT_SNAT
#
config BRIDGE_EBT_LOG
tristate "ebt: log support"
depends on BRIDGE_NF_EBTABLES
help
This option adds the log watcher, that you can use in any rule
in any ebtables table. It records info about the frame header
@ -207,7 +190,6 @@ config BRIDGE_EBT_LOG
config BRIDGE_EBT_ULOG
tristate "ebt: ulog support (OBSOLETE)"
depends on BRIDGE_NF_EBTABLES
help
This option enables the old bridge-specific "ebt_ulog" implementation
which has been obsoleted by the new "nfnetlink_log" code (see
@ -224,7 +206,6 @@ config BRIDGE_EBT_ULOG
config BRIDGE_EBT_NFLOG
tristate "ebt: nflog support"
depends on BRIDGE_NF_EBTABLES
help
This option enables the nflog watcher, which allows to LOG
messages through the netfilter logging API, which can use
@ -236,4 +217,4 @@ config BRIDGE_EBT_NFLOG
To compile it as a module, choose M here. If unsure, say N.
endmenu
endif # BRIDGE_NF_EBTABLES