dt-bindings: pwm: fsl-ftm: Convert to yaml format
Convert dt-bindings pwm-fsl-ftm.txt to yaml format. Additional change during convert: - "big-endian" is not required property. - Add "sleep" to pinctrl-names. - Change pinctrl-NNN to pinctrl-0 and pinctrl-1. - Remove label "pwm0" in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240528202025.2919358-1-Frank.Li@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
This commit is contained in:
Frank Li
Uwe Kleine-König
parent
37f7707077
commit
307d0a70d0
2 changed files with 92 additions and 55 deletions
92
Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml
Normal file
92
Documentation/devicetree/bindings/pwm/fsl,vf610-ftm-pwm.yaml
Normal file
|
|
@ -0,0 +1,92 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pwm/fsl,vf610-ftm-pwm.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale FlexTimer Module (FTM) PWM controller
|
||||
|
||||
description: |
|
||||
The same FTM PWM device can have a different endianness on different SoCs. The
|
||||
device tree provides a property to describing this so that an operating system
|
||||
device driver can handle all variants of the device. Refer to the table below
|
||||
for the endianness of the FTM PWM block as integrated into the existing SoCs:
|
||||
|
||||
SoC | FTM-PWM endianness
|
||||
--------+-------------------
|
||||
Vybrid | LE
|
||||
LS1 | BE
|
||||
LS2 | LE
|
||||
|
||||
Please see ../regmap/regmap.txt for more detail about how to specify endian
|
||||
modes in device tree.
|
||||
|
||||
maintainers:
|
||||
- Frank Li <Frank.Li@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,vf610-ftm-pwm
|
||||
- fsl,imx8qm-ftm-pwm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#pwm-cells":
|
||||
const: 3
|
||||
|
||||
clocks:
|
||||
minItems: 4
|
||||
maxItems: 4
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: ftm_sys
|
||||
- const: ftm_ext
|
||||
- const: ftm_fix
|
||||
- const: ftm_cnt_clk_en
|
||||
|
||||
pinctrl-0: true
|
||||
pinctrl-1: true
|
||||
|
||||
pinctrl-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: default
|
||||
- const: sleep
|
||||
|
||||
big-endian:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description:
|
||||
Boolean property, required if the FTM PWM registers use a big-
|
||||
endian rather than little-endian layout.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
allOf:
|
||||
- $ref: pwm.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/vf610-clock.h>
|
||||
|
||||
pwm@40038000 {
|
||||
compatible = "fsl,vf610-ftm-pwm";
|
||||
reg = <0x40038000 0x1000>;
|
||||
#pwm-cells = <3>;
|
||||
clocks = <&clks VF610_CLK_FTM0>,
|
||||
<&clks VF610_CLK_FTM0_EXT_SEL>,
|
||||
<&clks VF610_CLK_FTM0_FIX_SEL>,
|
||||
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
|
||||
clock-names = "ftm_sys", "ftm_ext", "ftm_fix", "ftm_cnt_clk_en";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_1>;
|
||||
big-endian;
|
||||
};
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
Freescale FlexTimer Module (FTM) PWM controller
|
||||
|
||||
The same FTM PWM device can have a different endianness on different SoCs. The
|
||||
device tree provides a property to describing this so that an operating system
|
||||
device driver can handle all variants of the device. Refer to the table below
|
||||
for the endianness of the FTM PWM block as integrated into the existing SoCs:
|
||||
|
||||
SoC | FTM-PWM endianness
|
||||
--------+-------------------
|
||||
Vybrid | LE
|
||||
LS1 | BE
|
||||
LS2 | LE
|
||||
|
||||
Please see ../regmap/regmap.txt for more detail about how to specify endian
|
||||
modes in device tree.
|
||||
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following
|
||||
compatible strings:
|
||||
- "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610
|
||||
- "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM
|
||||
- reg: Physical base address and length of the controller's registers
|
||||
- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
|
||||
the cells format.
|
||||
- clock-names: Should include the following module clock source entries:
|
||||
"ftm_sys" (module clock, also can be used as counter clock),
|
||||
"ftm_ext" (external counter clock),
|
||||
"ftm_fix" (fixed counter clock),
|
||||
"ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
|
||||
- clocks: Must contain a phandle and clock specifier for each entry in
|
||||
clock-names, please see clock/clock-bindings.txt for details of the property
|
||||
values.
|
||||
- pinctrl-names: Must contain a "default" entry.
|
||||
- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
|
||||
See pinctrl/pinctrl-bindings.txt for details of the property values.
|
||||
- big-endian: Boolean property, required if the FTM PWM registers use a big-
|
||||
endian rather than little-endian layout.
|
||||
|
||||
Example:
|
||||
|
||||
pwm0: pwm@40038000 {
|
||||
compatible = "fsl,vf610-ftm-pwm";
|
||||
reg = <0x40038000 0x1000>;
|
||||
#pwm-cells = <3>;
|
||||
clock-names = "ftm_sys", "ftm_ext",
|
||||
"ftm_fix", "ftm_cnt_clk_en";
|
||||
clocks = <&clks VF610_CLK_FTM0>,
|
||||
<&clks VF610_CLK_FTM0_EXT_SEL>,
|
||||
<&clks VF610_CLK_FTM0_FIX_SEL>,
|
||||
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_1>;
|
||||
big-endian;
|
||||
};
|
||||
Loading…
Reference in a new issue