diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 15b4a20d5062..d697229e3c18 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -14,6 +14,10 @@ Supported chips: Prefix: 'adm1276' Addresses scanned: - Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf + * Analog Devices ADM1293/ADM1294 + Prefix: 'adm1293', 'adm1294' + Addresses scanned: - + Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf Author: Guenter Roeck @@ -22,12 +26,12 @@ Description ----------- This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, -and ADM1276 Hot-Swap Controller and Digital Power Monitor. +ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors. -ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit -board to be removed from or inserted into a live backplane. They also feature -current and voltage readback via an integrated 12-bit analog-to-digital -converter (ADC), accessed using a PMBus interface. +ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that +allow a circuit board to be removed from or inserted into a live backplane. +They also feature current and voltage readback via an integrated 12 +bit analog-to-digital converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -58,16 +62,16 @@ Sysfs entries The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. -in1_label "vin1" or "vout1" depending on chip variant and - configuration. On ADM1075, vout1 reports the voltage on - the VAUX pin. -in1_input Measured voltage. -in1_min Minimum Voltage. -in1_max Maximum voltage. -in1_min_alarm Voltage low alarm. -in1_max_alarm Voltage high alarm. -in1_highest Historical maximum voltage. -in1_reset_history Write any value to reset history. +inX_label "vin1" or "vout1" depending on chip variant and + configuration. On ADM1075, ADM1293, and ADM1294, + vout1 reports the voltage on the VAUX pin. +inX_input Measured voltage. +inX_min Minimum Voltage. +inX_max Maximum voltage. +inX_min_alarm Voltage low alarm. +inX_max_alarm Voltage high alarm. +inX_highest Historical maximum voltage. +inX_reset_history Write any value to reset history. curr1_label "iout1" curr1_input Measured current. @@ -86,7 +90,9 @@ curr1_reset_history Write any value to reset history. power1_label "pin1" power1_input Input power. +power1_input_lowest Lowest observed input power. ADM1293 and ADM1294 only. +power1_input_highest Highest observed input power. power1_reset_history Write any value to reset history. - Power attributes are supported on ADM1075 and ADM1276 - only. + Power attributes are supported on ADM1075, ADM1276, + ADM1293, and ADM1294. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 9f7dbd189c97..67901cb08f77 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -30,8 +30,8 @@ config SENSORS_ADM1275 default n help If you say yes here you get hardware monitoring support for Analog - Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital - Power Monitors. + Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap + Controller and Digital Power Monitors. This driver can also be built as a module. If so, the module will be called adm1275. diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 1c19a2ee415c..188af4c89f40 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -24,7 +24,11 @@ #include #include "pmbus.h" -enum chips { adm1075, adm1275, adm1276 }; +enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 }; + +#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0) +#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5) +#define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6) #define ADM1275_PEAK_IOUT 0xd0 #define ADM1275_PEAK_VIN 0xd1 @@ -37,18 +41,30 @@ enum chips { adm1075, adm1275, adm1276 }; #define ADM1075_IRANGE_25 BIT(3) #define ADM1075_IRANGE_MASK (BIT(3) | BIT(4)) +#define ADM1293_IRANGE_25 0 +#define ADM1293_IRANGE_50 BIT(6) +#define ADM1293_IRANGE_100 BIT(7) +#define ADM1293_IRANGE_200 (BIT(6) | BIT(7)) +#define ADM1293_IRANGE_MASK (BIT(6) | BIT(7)) + +#define ADM1293_VIN_SEL_012 BIT(2) +#define ADM1293_VIN_SEL_074 BIT(3) +#define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3)) +#define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3)) + +#define ADM1293_VAUX_EN BIT(1) + #define ADM1275_IOUT_WARN2_LIMIT 0xd7 #define ADM1275_DEVICE_CONFIG 0xd8 #define ADM1275_IOUT_WARN2_SELECT BIT(4) #define ADM1276_PEAK_PIN 0xda - -#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0) - #define ADM1075_READ_VAUX 0xdd #define ADM1075_VAUX_OV_WARN_LIMIT 0xde #define ADM1075_VAUX_UV_WARN_LIMIT 0xdf +#define ADM1293_IOUT_MIN 0xe3 +#define ADM1293_PIN_MIN 0xe4 #define ADM1075_VAUX_STATUS 0xf6 #define ADM1075_VAUX_OV_WARN BIT(7) @@ -60,6 +76,9 @@ struct adm1275_data { bool have_uc_fault; bool have_vout; bool have_vaux_status; + bool have_mfr_vaux_status; + bool have_iout_min; + bool have_pin_min; bool have_pin_max; struct pmbus_driver_info info; }; @@ -94,6 +113,28 @@ static const struct coefficients adm1276_coefficients[] = { [4] = { 2115, 0, -1 }, /* power, vrange not set */ }; +static const struct coefficients adm1293_coefficients[] = { + [0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */ + [1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */ + [2] = { 19604, -50, -2 }, /* voltage, vrange 21V */ + [3] = { 8000, -100, -2 }, /* current, irange25 */ + [4] = { 4000, -100, -2 }, /* current, irange50 */ + [5] = { 20000, -1000, -3 }, /* current, irange100 */ + [6] = { 10000, -1000, -3 }, /* current, irange200 */ + [7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */ + [8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */ + [9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */ + [10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */ + [11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */ + [12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */ + [13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */ + [14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */ + [15] = { 6126, 0, -2 }, /* power, 21V, irange25 */ + [16] = { 30631, 0, -3 }, /* power, 21V, irange50 */ + [17] = { 15316, 0, -3 }, /* power, 21V, irange100 */ + [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */ +}; + static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); @@ -131,6 +172,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) return -ENODATA; ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX); break; + case PMBUS_VIRT_READ_IOUT_MIN: + if (!data->have_iout_min) + return -ENXIO; + ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN); + break; case PMBUS_VIRT_READ_IOUT_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT); break; @@ -140,6 +186,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_READ_VIN_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN); break; + case PMBUS_VIRT_READ_PIN_MIN: + if (!data->have_pin_min) + return -ENXIO; + ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN); + break; case PMBUS_VIRT_READ_PIN_MAX: if (!data->have_pin_max) return -ENXIO; @@ -163,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, u16 word) { + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + const struct adm1275_data *data = to_adm1275_data(info); int ret; if (page) @@ -176,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, break; case PMBUS_VIRT_RESET_IOUT_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0); + if (!ret && data->have_iout_min) + ret = pmbus_write_word_data(client, 0, + ADM1293_IOUT_MIN, 0); break; case PMBUS_VIRT_RESET_VOUT_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0); @@ -185,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, break; case PMBUS_VIRT_RESET_PIN_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0); + if (!ret && data->have_pin_min) + ret = pmbus_write_word_data(client, 0, + ADM1293_PIN_MIN, 0); break; default: ret = -ENODATA; @@ -231,6 +290,15 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) ret |= PB_VOLTAGE_OV_WARNING; if (mfr_status & ADM1075_VAUX_UV_WARN) ret |= PB_VOLTAGE_UV_WARNING; + } else if (data->have_mfr_vaux_status) { + mfr_status = pmbus_read_byte_data(client, page, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfr_status < 0) + return mfr_status; + if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN) + ret |= PB_VOLTAGE_OV_WARNING; + if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN) + ret |= PB_VOLTAGE_UV_WARNING; } break; default: @@ -244,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = { { "adm1075", adm1075 }, { "adm1275", adm1275 }, { "adm1276", adm1276 }, + { "adm1293", adm1293 }, + { "adm1294", adm1294 }, { } }; MODULE_DEVICE_TABLE(i2c, adm1275_id); @@ -258,7 +328,7 @@ static int adm1275_probe(struct i2c_client *client, struct adm1275_data *data; const struct i2c_device_id *mid; const struct coefficients *coefficients; - int vindex = -1, cindex = -1, pindex = -1; + int vindex = -1, voindex = -1, cindex = -1, pindex = -1; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA @@ -390,17 +460,72 @@ static int adm1275_probe(struct i2c_client *client, info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; break; + case adm1293: + case adm1294: + data->have_iout_min = true; + data->have_pin_min = true; + data->have_pin_max = true; + data->have_mfr_vaux_status = true; + + coefficients = adm1293_coefficients; + + voindex = 0; + switch (config & ADM1293_VIN_SEL_MASK) { + case ADM1293_VIN_SEL_012: /* 1.2V */ + vindex = 0; + break; + case ADM1293_VIN_SEL_074: /* 7.4V */ + vindex = 1; + break; + case ADM1293_VIN_SEL_210: /* 21V */ + vindex = 2; + break; + default: /* disabled */ + break; + } + + switch (config & ADM1293_IRANGE_MASK) { + case ADM1293_IRANGE_25: + cindex = 3; + break; + case ADM1293_IRANGE_50: + cindex = 4; + break; + case ADM1293_IRANGE_100: + cindex = 5; + break; + case ADM1293_IRANGE_200: + cindex = 6; + break; + } + + if (vindex >= 0) + pindex = 7 + vindex * 4 + (cindex - 3); + + if (config & ADM1293_VAUX_EN) + info->func[0] |= + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + + info->func[0] |= PMBUS_HAVE_PIN | + PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; + + break; default: dev_err(&client->dev, "Unsupported device\n"); return -ENODEV; } + + if (voindex < 0) + voindex = vindex; if (vindex >= 0) { info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m; info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b; info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R; - info->m[PSC_VOLTAGE_OUT] = coefficients[vindex].m; - info->b[PSC_VOLTAGE_OUT] = coefficients[vindex].b; - info->R[PSC_VOLTAGE_OUT] = coefficients[vindex].R; + } + if (voindex >= 0) { + info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m; + info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b; + info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R; } if (cindex >= 0) { info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;