Staging: w35und: make led lookup tables static

Impact: cleanup

No need to keep read-only data on the stack.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Pekka Enberg 2009-04-08 11:14:06 +03:00 committed by Greg Kroah-Hartman
parent 7c49a0ac12
commit 833d0cd39e

View file

@ -171,14 +171,21 @@ static const struct ieee80211_ops wbsoft_ops = {
.get_tsf = wbsoft_get_tsf,
};
static u8 LED_GRAY[20] = {
0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2
};
static u8 LED_GRAY2[30] = {
7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 15, 14, 13, 12, 11, 10, 9, 8
};
static void hal_led_control(unsigned long data)
{
struct wbsoft_priv *adapter = (struct wbsoft_priv *)data;
struct hw_data *pHwData = &adapter->sHwData;
struct wb35_reg *reg = &pHwData->reg;
u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
u8 LEDgray[20] = { 0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2 };
u8 LEDgray2[30] = { 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 14, 13, 12, 11, 10, 9, 8 };
u32 TimeInterval = 500, ltmp, ltmp2;
ltmp = 0;
@ -287,10 +294,10 @@ static void hal_led_control(unsigned long data)
// 20060901 Gray blinking if in disconnect state and not scanning
ltmp = reg->U1BC_LEDConfigure;
reg->U1BC_LEDConfigure &= ~0x1f;
if (LEDgray2[(pHwData->LED_Blinking % 30)]) {
if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |=
LEDgray2[(pHwData->LED_Blinking % 30)];
LED_GRAY2[(pHwData->LED_Blinking % 30)];
}
pHwData->LED_Blinking++;
if (reg->U1BC_LEDConfigure != ltmp)
@ -376,7 +383,7 @@ static void hal_led_control(unsigned long data)
reg->U1BC_LEDConfigure &= ~0x0f;
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |=
LEDgray[(pHwData->LED_Blinking - 1) % 20];
LED_GRAY[(pHwData->LED_Blinking - 1) % 20];
Wb35Reg_Write(pHwData, 0x03bc,
reg->U1BC_LEDConfigure);