MIPS: mm: compile maar_init unconditionally

maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES
was not set, which has been fine since it is only called from the
standard implementation of mem_init which has the same condition. In
preparation for calling it from the SMP startup code on secondary CPUs,
move maar_init outside of the #ifndef such that it is always compiled.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/11237/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Paul Burton 2015-09-25 08:59:36 -07:00 committed by Ralf Baechle
parent d77d5ac9c9
commit def3ab5d0a

View file

@ -252,6 +252,69 @@ void __init fixrange_init(unsigned long start, unsigned long end,
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
static void maar_init(void)
{
unsigned num_maars, used, i;
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
int page_is_ram(unsigned long pagenr)
{
@ -334,69 +397,6 @@ static inline void mem_init_free_highmem(void)
#endif
}
unsigned __weak platform_maar_init(unsigned num_pairs)
{
struct maar_config cfg[BOOT_MEM_MAP_MAX];
unsigned i, num_configured, num_cfg = 0;
phys_addr_t skip;
for (i = 0; i < boot_mem_map.nr_map; i++) {
switch (boot_mem_map.map[i].type) {
case BOOT_MEM_RAM:
case BOOT_MEM_INIT_RAM:
break;
default:
continue;
}
skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
cfg[num_cfg].lower = boot_mem_map.map[i].addr;
cfg[num_cfg].lower += skip;
cfg[num_cfg].upper = cfg[num_cfg].lower;
cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
cfg[num_cfg].upper -= skip;
cfg[num_cfg].attrs = MIPS_MAAR_S;
num_cfg++;
}
num_configured = maar_config(cfg, num_cfg, num_pairs);
if (num_configured < num_cfg)
pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
num_pairs, num_cfg);
return num_configured;
}
static void maar_init(void)
{
unsigned num_maars, used, i;
if (!cpu_has_maar)
return;
/* Detect the number of MAARs */
write_c0_maari(~0);
back_to_back_c0_hazard();
num_maars = read_c0_maari() + 1;
/* MAARs should be in pairs */
WARN_ON(num_maars % 2);
/* Configure the required MAARs */
used = platform_maar_init(num_maars / 2);
/* Disable any further MAARs */
for (i = (used * 2); i < num_maars; i++) {
write_c0_maari(i);
back_to_back_c0_hazard();
write_c0_maar(0);
back_to_back_c0_hazard();
}
}
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM