Commit graph

926 commits

Author SHA1 Message Date
Joe Korty
5ef37b1964 [PATCH] add cpu_relax to hrtimer_cancel
Add a cpu_relax() to the hand-coded spinwait in hrtimer_cancel().

Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:42 -07:00
Christoph Hellwig
d824e66a9a [PATCH] build kernel/irq/migration.c only if CONFIG_GENERIC_PENDING_IRQ is set
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:41 -07:00
Adrian Bunk
aa7271076a [PATCH] the scheduled unexport of panic_timeout
Implement the scheduled unexport of panic_timeout.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Andrew Morton
ba6edfcd17 [PATCH] timer initialisation fix
We need the boot CPU's tvec_bases[] entry to be initialised super-early in
boot, for early_serial_setup().  That runs within setup_arch(), before even
per-cpu areas are initialised.

The patch changes tvec_bases to use compile-time initialisation, and adds a
separate array `tvec_base_done' to keep track of which CPU has had its
tvec_bases[] entry initialised (because we can no longer use the zeroness of
that tvec_bases[] entry to determine whether it has been initialised).

Thanks to Eugene Surovegin <ebs@ebshome.net> for diagnosing this.

Cc: Eugene Surovegin <ebs@ebshome.net>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Hyok S. Choi
3016b42153 [PATCH] frv: define MMU mode specific syscalls as 'cond_syscall' and clean up unneeded macros
For some architectures, a few syscalls are not linked in noMMU mode.  In
that case, the MMU depending syscalls are needed to be defined as
'cond_syscall'.  For example, ARM architecture selectively links sys_mlock
by the mode configuration.

In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in
arch/frv/kernel/entry.S.  However these conditional macros are just
duplicates if they were defined as cond_syscall.  Compilation test is done
with FRV toolchains for both of MMU and noMMU mode.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:33 -07:00
Mike Galbraith
8a5bc075b8 [PATCH] sched: don't awaken RT tasks on expired array
RT tasks are being awakened on the expired array when expired_starving() is
true, whereas they really should be excluded.  Fix.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:30 -07:00
Mike Galbraith
5ce74abe78 [PATCH] sched: fix interactive task starvation
Fix a starvation problem that occurs when a stream of highly interactive tasks
delay an array switch for extended periods despite EXPIRED_STARVING(rq) being
true.  AFAIKT, the only choice is to enqueue awakening tasks on the expired
array in this case.

Without this patch, it can be nearly impossible to remotely login to a busy
server, and interactive shell commands can starve for minutes.

Also, convert the EXPIRED_STARVING macro into an inline function which humans
can understand.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:30 -07:00
Jordan Hargrave
b20367a6c2 [PATCH] x86_64: Fix drift with HPET timer enabled
If the HPET timer is enabled, the clock can drift by ~3 seconds a day.
This is due to the HPET timer not being initialized with the correct
setting (still using PIT count).

If HZ changes, this drift can become even more pronounced.

HPET patch initializes tick_nsec with correct tick_nsec settings for
HPET timer.

Vojtech comments:

  "It's not entirely correct (it assumes the HPET ticks totally
   exactly), but it's significantly better than assuming the PIT error
   there."

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-09 11:53:53 -07:00
Eric Sesterhenn
9f31252cb6 BUG_ON() Conversion in kernel/signal.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:45:55 +02:00
Eric Sesterhenn
fda8bd78a1 BUG_ON() Conversion in kernel/signal.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:44:47 +02:00
Eric Sesterhenn
524223ca81 BUG_ON() Conversion in kernel/ptrace.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:43:40 +02:00
Kalin KOZHUHAROV
8ba8e95ed1 Fix comments: s/granuality/granularity/
I was grepping through the code and some `grep ganularity -R .` didn't
catch what I thought. Then looking closer I saw the term "granuality"
used in only four places (in comments) and granularity in many more
places describing the same idea. Some other facts:

dictionary.com does not know such a word
define:granuality on google is not found (and pages for granuality are
mostly related to patches to the kernel)
it has not been discussed as a term on LKML, AFAICS (=Can Search)

To be consistent, I think granularity should be used everywhere.

Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:41:22 +02:00
Eric Sesterhenn
8abd8e298e BUG_ON() Conversion in kernel/printk.c
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:21:17 +02:00
Adrian Bunk
3e6e952d1d help text: SOFTWARE_SUSPEND doesn't need ACPI
The note that SOFTWARE_SUSPEND doesn't need APM is helpful, but nowadays
the information that it doesn't need ACPI, too, is even more helpful.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:03:08 +02:00
Kirill Korotaev
4286229868 [PATCH] wrong error path in dup_fd() leading to oopses in RCU
Wrong error path in dup_fd() - it should return NULL on error,
not an address of already freed memory :/

Triggered by OpenVZ stress test suite.

What is interesting is that it was causing different oopses in RCU like
below:
Call Trace:
   [<c013492c>] rcu_do_batch+0x2c/0x80
   [<c0134bdd>] rcu_process_callbacks+0x3d/0x70
   [<c0126cf3>] tasklet_action+0x73/0xe0
   [<c01269aa>] __do_softirq+0x10a/0x130
   [<c01058ff>] do_softirq+0x4f/0x60
   =======================
   [<c0113817>] smp_apic_timer_interrupt+0x77/0x110
   [<c0103b54>] apic_timer_interrupt+0x1c/0x24
  Code:  Bad EIP value.
   <0>Kernel panic - not syncing: Fatal exception in interrupt

Signed-Off-By: Pavel Emelianov <xemul@sw.ru>
Signed-Off-By: Dmitry Mishin <dim@openvz.org>
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:25:46 -08:00
Eric W. Biederman
92476d7fc0 [PATCH] pidhash: Refactor the pid hash table
Simplifies the code, reduces the need for 4 pid hash tables, and makes the
code more capable.

In the discussions I had with Oleg it was felt that to a large extent the
cleanup itself justified the work.  With struct pid being dynamically
allocated meant we could create the hash table entry when the pid was
allocated and free the hash table entry when the pid was freed.  Instead of
playing with the hash lists when ever a process would attach or detach to a
process.

For myself the fact that it gave what my previous task_ref patch gave for free
with simpler code was a big win.  The problem is that if you hold a reference
to struct task_struct you lock in 10K of low memory.  If you do that in a user
controllable way like /proc does, with an unprivileged but hostile user space
application with typical resource limits of 1000 fds and 100 processes I can
trigger the OOM killer by consuming all of low memory with task structs, on a
machine wight 1GB of low memory.

If I instead hold a reference to struct pid which holds a pointer to my
task_struct, I don't suffer from that problem because struct pid is 2 orders
of magnitude smaller.  In fact struct pid is small enough that most other
kernel data structures dwarf it, so simply limiting the number of referring
data structures is enough to prevent exhaustion of low memory.

This splits the current struct pid into two structures, struct pid and struct
pid_link, and reduces our number of hash tables from PIDTYPE_MAX to just one.
struct pid_link is the per process linkage into the hash tables and lives in
struct task_struct.  struct pid is given an indepedent lifetime, and holds
pointers to each of the pid types.

The independent life of struct pid simplifies attach_pid, and detach_pid,
because we are always manipulating the list of pids and not the hash table.
In addition in giving struct pid an indpendent life it makes the concept much
more powerful.

Kernel data structures can now embed a struct pid * instead of a pid_t and
not suffer from pid wrap around problems or from keeping unnecessarily
large amounts of memory allocated.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Eric W. Biederman
8c7904a00b [PATCH] task: RCU protect task->usage
A big problem with rcu protected data structures that are also reference
counted is that you must jump through several hoops to increase the reference
count.  I think someone finally implemented atomic_inc_not_zero(&count) to
automate the common case.  Unfortunately this means you must special case the
rcu access case.

When data structures are only visible via rcu in a manner that is not
determined by the reference count on the object (i.e.  tasks are visible until
their zombies are reaped) there is a much simpler technique we can employ.
Simply delaying the decrement of the reference count until the rcu interval is
over.

What that means is that the proc code that looks up a task and later
wants to sleep can now do:

rcu_read_lock();
task = find_task_by_pid(some_pid);
if (task) {
	get_task_struct(task);
}
rcu_read_unlock();

The effect on the rest of the kernel is that put_task_struct becomes cheaper
and immediate, and in the case where the task has been reaped it frees the
task immediate instead of unnecessarily waiting an until the rcu interval is
over.

Cleanup of task_struct does not happen when its reference count drops to
zero, instead cleanup happens when release_task is called.  Tasks can only
be looked up via rcu before release_task is called.  All rcu protected
members of task_struct are freed by release_task.

Therefore we can move call_rcu from put_task_struct into release_task.  And
we can modify release_task to not immediately release the reference count
but instead have it call put_task_struct from the function it gives to
call_rcu.

The end result:

- get_task_struct is safe in an rcu context where we have just looked
  up the task.

- put_task_struct() simplifies into its old pre rcu self.

This reorganization also makes put_task_struct uncallable from modules as
it is not exported but it does not appear to be called from any modules so
this should not be an issue, and is trivially fixed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Andrew Morton
158d9ebd19 [PATCH] resurrect __put_task_struct
This just got nuked in mainline.  Bring it back because Eric's patches use it.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Eric W. Biederman
390e2ff077 [PATCH] Make setsid() more robust
The core problem: setsid fails if it is called by init.  The effect in 2.6.16
and the earlier kernels that have this problem is that if you do a "ps -j 1 or
ps -ej 1" you will see that init and several of it's children have process
group and session == 0.  Instead of process group == session == 1.  Despite
init calling setsid.

The reason it fails is that daemonize calls set_special_pids(1,1) on kernel
threads that are launched before /sbin/init is called.

The only remaining effect in that current->signal->leader == 0 for init
instead of 1.  And the setsid call fails.  No one has noticed because
/sbin/init does not check the return value of setsid.

In 2.4 where we don't have the pidhash table, and daemonize doesn't exist
setsid actually works for init.

I care a lot about pid == 1 not being a special case that we leave broken,
because of the container/jail work that I am doing.

- Carefully allow init (pid == 1) to call setsid despite the kernel using
  its session.

- Use find_task_by_pid instead of find_pid because find_pid taking a
  pidtype is going away.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Thomas Gleixner
9741ef964d [PATCH] futex: check and validate timevals
The futex timeval is not checked for correctness.  The change does not
break existing applications as the timeval is supplied by glibc (and glibc
always passes a correct value), but the glibc-internal tests for this
functionality fail.

Signed-off-by: Thomas Gleixner <tglx@tglx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
d425b274ba [PATCH] sched: activate SCHED BATCH expired
To increase the strength of SCHED_BATCH as a scheduling hint we can
activate batch tasks on the expired array since by definition they are
latency insensitive tasks.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
7c4bb1f9b3 [PATCH] sched: remove on runqueue requeueing
On runqueue time is used to elevate priority in schedule().

In the code it currently requeues tasks even if their priority is not
elevated, which would end up placing them at the end of their runqueue
array effectively delaying them instead of improving their priority.

Bug spotted by Mike Galbraith <efault@gmx.de>

This patch removes this requeueing.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
5138930e6a [PATCH] sched: include noninteractive sleep in idle detect
Tasks waiting in SLEEP_NONINTERACTIVE state can now get to best priority so
they need to be included in the idle detection code.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:59 -08:00
Con Kolivas
e72ff0bb2c [PATCH] sched: dont decrease idle sleep avg
We watch for tasks that sleep extended periods and don't allow one single
prolonged sleep period from elevating priority to maximum bonus to prevent cpu
bound tasks from getting high priority with single long sleeps.  There is a
bug in the current code that also penalises tasks that already have high
priority.  Correct that bug.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Con Kolivas
e7c38cb49c [PATCH] sched: make task_noninteractive use sleep_type
Alterations to the pipe code in the kernel made it possible for relative
starvation to occur with tasks that slept waiting on a pipe getting unfair
priority bonuses even if they were otherwise fully cpu bound so the
TASK_NONINTERACTIVE flag was introduced which prevented any change to
sleep_avg while sleeping waiting on a pipe.  This change also leads to the
converse though, preventing any priority boost from occurring in truly
interactive tasks that wait on pipes.

Convert the TASK_NONINTERACTIVE flag to set sleep_type to SLEEP_NONINTERACTIVE
which will allow a linear bonus to priority based on sleep time thus allowing
interactive tasks to get high priority if they sleep enough.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Con Kolivas
3dee386e14 [PATCH] sched: cleanup task_activated()
The activated flag in task_struct is used to track different sleep types and
its usage is somewhat obfuscated.  Convert the variable to an enum with more
descriptive names without altering the function.

Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Jack Steiner
db1b1fefc2 [PATCH] sched: reduce overhead of calc_load
Currently, count_active_tasks() calls both nr_running() &
nr_interruptible().  Each of these functions does a "for_each_cpu" & reads
values from the runqueue of each cpu.  Although this is not a lot of
instructions, each runqueue may be located on different node.  Depending on
the architecture, a unique TLB entry may be required to access each
runqueue.

Since there may be more runqueues than cpu TLB entries, a scan of all
runqueues can trash the TLB.  Each memory reference incurs a TLB miss &
refill.

In addition, the runqueue cacheline that contains nr_running &
nr_uninterruptible may be evicted from the cache between the two passes.
This causes unnecessary cache misses.

Combining nr_running() & nr_interruptible() into a single function
substantially reduces the TLB & cache misses on large systems.  This should
have no measureable effect on smaller systems.

On a 128p IA64 system running a memory stress workload, the new function
reduced the overhead of calc_load() from 605 usec/call to 324 usec/call.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Dimitri Sivanich
3055addadb [PATCH] hrtimer: call get_softirq_time() only when necessary in run_hrtimer_queue()
It seems that run_hrtimer_queue() is calling get_softirq_time() more
often than it needs to.

With this patch, it only calls get_softirq_time() if there's a
pending timer.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Thomas Gleixner
669d7868ae [PATCH] hrtimer: use generic sleeper for nanosleep
Replace the nanosleep private sleeper functionality by the generic hrtimer
sleeper.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Thomas Gleixner
00362e33f6 [PATCH] hrtimer: create generic sleeper
The removal of the data field in the hrtimer structure enforces the
embedding of the timer into another data structure.  nanosleep now uses a
private implementation of the most common used timer callback function
(simple task wakeup).

In order to avoid the reimplentation of such functionality all over the
place a generic hrtimer_sleeper functionality is created.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:58 -08:00
Andrew Morton
7529c30116 [PATCH] modules: permit Dual-MIT/GPL licenses
One of the LEDs driver files wants to use this.

Probably drivers/mtd/maps/ipaq-flash.c wants to convert as well - right now
it'll be tainting the kernel.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Bowler <jbowler@acm.org>
Cc: "'Richard Purdie'" <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Paul Jackson
e4e364e865 [PATCH] cpuset: memory migration interaction fix
Fix memory migration so that it works regardless of what cpuset the invoking
task is in.

If a task invoked a memory migration, by doing one of:

       1) writing a different nodemask to a cpuset 'mems' file, or

       2) writing a tasks pid to a different cpuset's 'tasks' file,
          where the cpuset had its 'memory_migrate' option turned on, then the
          allocation of the new pages for the migrated task(s) was constrained
          by the invoking tasks cpuset.

If this task wasn't in a cpuset that allowed the requested memory nodes, the
memory migration would happen to some other nodes that were in that invoking
tasks cpuset.  This was usually surprising and puzzling behaviour: Why didn't
the pages move?  Why did the pages move -there-?

To fix this, temporarilly change the invoking tasks 'mems_allowed' task_struct
field to the nodes the migrating tasks is moving to, so that new pages can be
allocated there.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:55 -08:00
Paul Jackson
2741a559a0 [PATCH] cpuset: unsafe mm reference fix
Fix unsafe reference to a tasks mm struct, by moving the reference inside of a
convenient nearby properly guarded code block.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:55 -08:00
Paul Jackson
4a01c8d5be [PATCH] cpuset: task_lock comment fix
Fix cpuset comment involving case of a tasks cpuset pointer being NULL.
Thanks to "the_top_cpuset_hack", this code no longer sees NULL task->cpuset
pointers.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:55 -08:00
KaiGai Kohei
bb231fe3a5 [PATCH] Fix pacct bug in multithreading case.
I noticed a bug on the process accounting facility.  In multi-threading
process, some data would be recorded incorrectly when the group_leader dies
earlier than one or more threads.  The attached patch fixes this problem.

See below.  'bugacct' is a test program that create a worker thread after 4
seconds sleeping, then the group_leader dies soon.  The worker thread
consume CPU/Memory for 6 seconds, then exit.  We can estimate 10 seconds as
etime and 6 seconds as stime + utime.  This is a sample program which the
group_leader dies earlier than other threads.

The results of same binary execution on different kernel are below.
-- accounted records --------------------
         |   btime  | utime | stime | etime | minflt | majflt |   comm  |
original | 13:16:40 |  0.00 |  0.00 |  6.10 |    171 |      0 | bugacct |
 patched | 13:20:21 |  5.83 |  0.18 | 10.03 |  32776 |      0 | bugacct |
(*) bugacct allocates 128MB memory, thus 128MB / 4KB = 32768 of minflt is
    appropriate.

-- Test results in original kernel ------
$ date; time -p ./bugacct
Tue Mar 28 13:16:36 JST 2006  <- But pacct said btime is 13:16:40
real 10.11                    <- But pacct said etime is 6.10
user 5.96                     <- But pacct said utime is 0.00
sys 0.14                      <- But pacct said stime is 0.00
$
-- Test results in patched kernel -------
$ date; time -p ./bugacct
Tue Mar 28 13:20:21 JST 2006
real 10.04
user 5.83
sys 0.19
$

In the original 2.6.16 kernel, pacct records btime, utime, stime, etime and
minflt incorrectly.  In my opinion, this problem is caused by an assumption
that group_leader dies last.

The following section calculates process running time for etime and btime.
But it means running time of the thread that dies last, not process.  The
start_time of the first thread in the process (group_leader) should be
reduced from uptime to calculate etime and btime correctly.

   ---- do_acct_process() in kernel/acct.c:
   /* calculate run_time in nsec*/
   do_posix_clock_monotonic_gettime(&uptime);
   run_time = (u64)uptime.tv_sec*NSEC_PER_SEC + uptime.tv_nsec;
   run_time -= (u64)current->start_time.tv_sec*NSEC_PER_SEC
                                   + current->start_time.tv_nsec;
   ----

The following section calculates stime and utime of the process.
But it might count the utime and stime of the group_leader duplicatly
and ignore the utime and stime of the thread dies last, when one or
more threads remain after group_leader dead.
The ac_utime should be calculated as the sum of the signal->utime
and utime of the thread dies last. The ac_stime should be done also.

   ---- do_acct_process() in kernel/acct.c:
   jiffies = cputime_to_jiffies(cputime_add(current->group_leader->utime,
                                            current->signal->utime));
   ac.ac_utime = encode_comp_t(jiffies_to_AHZ(jiffies));
   jiffies = cputime_to_jiffies(cputime_add(current->group_leader->stime,
                                            current->signal->stime));
   ac.ac_stime = encode_comp_t(jiffies_to_AHZ(jiffies));
   ----

The part of the minflt/majflt calculation has same problem.
This patch solves those problems, I think.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:54 -08:00
OGAWA Hirofumi
9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Oleg Nesterov
a2c348fe01 [PATCH] __mod_timer: simplify ->base changing
Since base and new_base are of the same type now, we can save one 'if'
branch and simplify the code a bit.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Oleg Nesterov
3691c5199e [PATCH] kill __init_timer_base in favor of boot_tvec_bases
Commit a4a6198b80:
	[PATCH] tvec_bases too large for per-cpu data

introduced "struct tvec_t_base_s boot_tvec_bases" which is visible at
compile time.  This means we can kill __init_timer_base and move
timer_base_s's content into tvec_t_base_s.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:52 -08:00
Pavel Machek
85b6bce365 [PATCH] Fix suspend with traced tasks
strace /bin/bash misbehaves after resume; this fixes it.

(akpm: it's scary calling refrigerator() in state TASK_TRACED, but it seems to
do the right thing).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:50 -08:00
Oleg Nesterov
547679087b [PATCH] send_sigqueue: simplify and fix the race
send_sigqueue() checks PF_EXITING, then locks p->sighand->siglock.  This is
unsafe: 'p' can exit in between and set ->sighand = NULL.  The race is
theoretical, the window is tiny and irqs are disabled by the caller, so I
don't think we need the fix for -stable tree.

Convert send_sigqueue() to use lock_task_sighand() helper.

Also, delete 'p->flags & PF_EXITING' re-check, it is unneeded and the
comment is wrong.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
a1d5e21e3e [PATCH] do_notify_parent_cldstop: remove 'to_self' param
The previous patch has changed callsites of do_notify_parent_cldstop() so that
to_self == (->ptrace & PT_PTRACED) always (as it should be).  We can remove
this parameter now.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
883606a7c9 [PATCH] finish_stop: don't check stop_count < 0
Remove an obscure 'stop_count < 0' check in finish_stop().  The previous patch
made this case impossible.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
dac27f4a09 [PATCH] simplify do_signal_stop()
do_signal_stop() considers 'thread_group_empty()' as a special case.
This was needed to avoid taking tasklist_lock. Since this lock is
unneeded any longer, we can remove this special case and simplify
the code even more.

Also, before this patch, finish_stop() was called with stop_count == -1
for 'thread_group_empty()' case. This is not strictly wrong, but confusing
and unneeded.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
a7e5328a06 [PATCH] cleanup __exit_signal->cleanup_sighand path
Move 'tsk->sighand = NULL' from cleanup_sighand() to __exit_signal().  This
makes the exit path more understandable and allows us to do
cleanup_sighand() outside of ->siglock protected section.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
4a2c7a7837 [PATCH] make fork() atomic wrt pgrp/session signals
Eric W. Biederman wrote:
>
> Ok. SUSV3/Posix is clear, fork is atomic with respect
> to signals.  Either a signal comes before or after a
> fork but not during. (See the rationale section).
> http://www.opengroup.org/onlinepubs/000095399/functions/fork.html
>
> The tasklist_lock does not stop forks from adding to a process
> group. The forks stall while the tasklist_lock is held, but a fork
> that began before we grabbed the tasklist_lock simply completes
> afterwards, and the child does not receive the signal.

This also means that SIGSTOP or sig_kernel_coredump() signal can't
be delivered to pgrp/session reliably.

With this patch copy_process() returns -ERESTARTNOINTR when it
detects a pending signal, fork() will be restarted transparently
after handling the signals.

This patch also deletes now unneeded "group_stop_count > 0" check,
copy_process() can no longer succeed while group stop in progress.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
47e65328a7 [PATCH] pids: kill PIDTYPE_TGID
This patch kills PIDTYPE_TGID pid_type thus saving one hash table in
kernel/pid.c and speeding up subthreads create/destroy a bit.  It is also a
preparation for the further tref/pids rework.

This patch adds 'struct list_head thread_group' to 'struct task_struct'
instead.

We don't detach group leader from PIDTYPE_PID namespace until another
thread inherits it's ->pid == ->tgid, so we are safe wrt premature
free_pidmap(->tgid) call.

Currently there are no users of find_task_by_pid_type(PIDTYPE_TGID).
Should the need arise, we can use find_task_by_pid()->group_leader.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
88531f725b [PATCH] do_sigaction: don't take tasklist_lock
do_sigaction() does not need tasklist_lock anymore, we can simplify the code.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:44 -08:00
Oleg Nesterov
aacc90944d [PATCH] do_group_exit: don't take tasklist_lock
do_group_exit() takes tasklist_lock for zap_other_threads(), this is unneeded
now.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00
Oleg Nesterov
a122b341b7 [PATCH] do_signal_stop: don't take tasklist_lock
do_signal_stop() does not need tasklist_lock anymore.  So it does not need to
do misc re-checks, and we can simplify the code.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00
Oleg Nesterov
6108ccd3e2 [PATCH] relax sig_needs_tasklist()
handle_stop_signal() does not need tasklist_lock for SIG_KERNEL_STOP_MASK
signals anymore.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00