cifs_mount() for DFS mounts is for a long time way too complex to
follow, mostly because it lacks some documentation, does a lot of
operations like resolving DFS roots and links, checking for path
components, perform failover, crap code, etc.
Besides adding some documentation to it, do some cleanup and ensure
that the following is implemented and supported:
* non-DFS mounts
* DFS failover
* DFS root mounts
- tcon and cifs_sb must contain DFS path (NOT including prefix)
- if prefix path, then save it in cifs_sb and it must not be
changed
* DFS link mounts
- tcon and cifs_sb must contain DFS path (including prefix)
- if prefix path, then save it in cifs_sb and it may be changed
* prevent recursion on broken link referrals (MAX_NESTED_LINKS)
* check every path component of the currently resolved
target (including prefix), and chase them accordingly
* make sure that DFS referrals go through newly resolved root
servers
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For DFS root mounts that contain a prefix path, do not change them
after failover.
E.g., if the user mounts
//srvA/root/dir1
and then lost connection to srvA, it will reconnect to
//srvB/root/dir1
In case of DFS links, which may resolve to different prefix paths
depending on their list of targets, the following must be supported:
- mount //srvA/root/link/bar
- connect to //srvA/share
- set prefix path to "bar"
- lost connection to srvA
- reconnect to next target: //srvB/share/foo
- set new prefix path to "foo/bar"
In cifs_tree_connect(), check the server_type field of the cached DFS
referral to determine whether or not prefix path should be updated.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently if the call dfs_cache_get_tgt_share fails we cannot
fully guarantee that share and prefix are set to NULL and the
next iteration of the loop can end up potentially double freeing
these pointers. Since the semantics of dfs_cache_get_tgt_share
are ambiguous for failure cases with the setting of share and
prefix (currently now and the possibly the future), it seems
prudent to set the pointers to NULL when the objects are
free'd to avoid any double frees.
Addresses-Coverity: ("Double free")
Fixes: 96296c946a2a ("cifs: handle RESP_GET_DFS_REFERRAL.PathConsumed in reconnect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Use PathConsumed field when parsing prefixes of referral paths that
either match a cache entry or are a complete prefix path of an
existing entry.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case there were no cached DFS referrals in
reconn_setup_dfs_targets(), set cifs_sb to NULL prior to calling
reconn_set_next_dfs_target() so it would not try to access an empty
tgt_list.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This function has nothing to do with *invalidation* but setting up the
next target server from a cached referral.
Rename it to reconn_set_next_dfs_target(). While at it, get rid of
some meaningless checks.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
They were identical execpt to CIFSTCon() vs. SMB2_tcon().
These are also available via ops->tree_connect().
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert cpu_to_be32(be32_to_cpu(E1) + E2) to use be32_add_cpu().
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The flag from the primary tcon needs to be copied into the volume info
so that cifs_get_tcon will try to enable extensions on the per-user
tcon. At that point, since posix extensions must have already been
enabled on the superblock, don't try to needlessly adjust the mount
flags.
Fixes: ce558b0e17 ("smb3: Add posix create context for smb3.11 posix mounts")
Fixes: b326614ea2 ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Fixes: ca567eb2b3 ("SMB3: Allow persistent handle timeout to be configurable on mount")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Without this:
- persistent handles will only be enabled for per-user tcons if the
server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.
Signed-off-by: Paul Aurich <paul@darkrain42.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
-----BEGIN PGP SIGNATURE-----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=gCcP
-----END PGP SIGNATURE-----
Merge tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"22 changesets, 2 for stable.
Includes big performance improvement for large i/o when using
multichannel, also includes DFS fixes"
* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal module version number
cifs: multichannel: try to rebind when reconnecting a channel
cifs: multichannel: use pointer for binding channel
smb3: remove static checker warning
cifs: multichannel: move channel selection above transport layer
cifs: multichannel: always zero struct cifs_io_parms
cifs: dump Security Type info in DebugData
smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
smb3: default to minimum of two channels when multichannel specified
cifs: multichannel: move channel selection in function
cifs: fix minor typos in comments and log messages
smb3: minor update to compression header definitions
cifs: minor fix to two debug messages
cifs: Standardize logging output
smb3: Add new parm "nodelete"
cifs: move some variables off the stack in smb2_ioctl_query_info
cifs: reduce stack use in smb2_compound_op
cifs: get rid of unused parameter in reconn_setup_dfs_targets()
cifs: handle hostnames that resolve to same ip in failover
cifs: set up next DFS target before generic_ip_connect()
...
When "multichannel" is specified on mount, make sure to default to
at least two channels.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to handle workloads where it is important to make sure that
a buggy app did not delete content on the drive, the new mount option
"nodelete" allows standard permission checks on the server to work,
but prevents on the client any attempts to unlink a file or delete
a directory on that mount point. This can be helpful when running
a little understood app on a network mount that contains important
content that should not be deleted.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
The target iterator parameter "it" is not used in
reconn_setup_dfs_targets(), so just remove it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than
FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to
\FOO\share1 but server->hostname will have "FOO.COM". The reason is
because both "FS0" and "FS0.FOO.COM" resolve to same IP address and
they share same TCP server connection, but "FS0.FOO.COM" was the first
hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good
connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...
it successfully reconnects to "FS0" server but does not set up next
DFS target - which should be the same target server "\FS0\share1" -
and server->hostname remains set to "FS0.FOO.COM" rather than "FS0",
as reconn_inval_dfs_target() would have it set to "FS0" if called
earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail
because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS
target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before
generic_ip_connect() so server->hostname will get updated correctly
prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover"
patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to
the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The "nolease" mount option is only supported for SMB2+ mounts.
Fail with appropriate error message if vers=1.0 option is passed.
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This disables tcon re-use for DFS shares.
tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.
If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.
tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:
//domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot
//serverA/dfsroot/link -> /serverA/target1/aa/bb
//serverA/dfsroot/link2 -> /serverA/target1/cc/dd
you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.
The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. For example, if BSD process
accounting is enabled and the accounting file has FS_SYNC_FL set and is
located on an ext4 filesystem without a journal, then do_exit() can end
up calling ext4_write_inode(). That triggers the
WARN_ON_ONCE(current->flags & PF_MEMALLOC) there, as it assumes
(appropriately) that inodes aren't written when allocating memory.
This was originally reported for another kernel thread, xfsaild() [1].
cifs_demultiplex_thread() also exits with PF_MEMALLOC set, so it's
potentially subject to this same class of issue -- though I haven't been
able to reproduce the WARN_ON_ONCE() via CIFS, since unlike xfsaild(),
cifs_demultiplex_thread() is sent SIGKILL before exiting, and that
interrupts the write to the BSD process accounting file.
Either way, leaving PF_MEMALLOC set is potentially problematic. Let's
clean this up by properly saving and restoring PF_MEMALLOC.
[1] https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The warning we print on mount about how to use less secure dialects
(when the user does not specify a version on mount) is useful
but is noisy to print on every default mount, and can be changed
to a warn_once. Slightly updated the warning text as well to note
SMB3.1.1 which has been the default which is typically negotiated
(for a few years now) by most servers.
"No dialect specified on mount. Default has changed to a more
secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS
(SMB1). To use the less secure SMB1 dialect to access old
servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1)
specify vers=1.0 on mount."
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
We really, really don't want people using insecure dialects
unless they realize what they are doing ...
Add mount warning if mounting with vers=1.0 (older SMB1/CIFS
dialect) instead of the default (SMB2.1 or later, typically
SMB3.1.1).
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
This means it's consistently called and the callers don't need to
care about it.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For the case where we have a DFS path like below and we're currently
connected to targetA:
//dfsroot/link -> //targetA/share/foo, //targetB/share/bar
after failover, we should make sure to update cifs_sb->prepath so the
next operations will use the new prefix path "/bar".
Besides, in order to simplify the use of different prefix paths,
enforce CIFS_MOUNT_USE_PREFIX_PATH for DFS mounts so we don't have to
revalidate the root dentry every time we set a new prefix path.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A number of the debug statements output file or directory mode
in hex. Change these to print using octal.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.
Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1760879
Fix an oops in match_prepath() by making sure that the prepath string is not
NULL before we pass it into strcmp().
This is similar to other checks we make for example in cifs_root_iget()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the addition of SMB session channels, we introduced new TCP
server pointers that have no sessions or tcons associated with them.
In this case, when we started looking for TCP connections, we might
end up picking session channel rather than the master connection,
hence failing to get either a session or a tcon.
In order to fix that, this patch introduces a new "is_channel" field
to TCP_Server_Info structure so we can skip session channels during
lookup of connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.
Channels are closed when the master session is closed.
The master connection becomes the first channel.
,-------------> global cifs_tcp_ses_list <-------------------------.
| |
'- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-'
(master con) (chan#1 con) (chan#2 con)
| ^ ^ ^
v '--------------------|--------------------'
cifs_ses |
- chan_count = 3 |
- chans[] ---------------------'
- smb3signingkey[]
(master signing key)
Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).
For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.
For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().
Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.
Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.
Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
adds:
- [no]multichannel to enable/disable multichannel
- max_channels=N to control how many channels to create
these options are then stored in the volume struct.
- store channels and max_channels in cifs_ses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.
Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.
Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.
Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.
Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d7915 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the client hits reconnect it iterates over the mid
pending queue marking entries for retry and moving them
to a temporary list to issue callbacks later without holding
GlobalMid_Lock. In the same time there is no guarantee that
mids can't be removed from the temporary list or even
freed completely by another thread. It may cause a temporary
list corruption:
[ 430.454897] list_del corruption. prev->next should be ffff98d3a8f316c0, but was 2e885cb266355469
[ 430.464668] ------------[ cut here ]------------
[ 430.466569] kernel BUG at lib/list_debug.c:51!
[ 430.468476] invalid opcode: 0000 [#1] SMP PTI
[ 430.470286] CPU: 0 PID: 13267 Comm: cifsd Kdump: loaded Not tainted 5.4.0-rc3+ #19
[ 430.473472] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 430.475872] RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
...
[ 430.510426] Call Trace:
[ 430.511500] cifs_reconnect+0x25e/0x610 [cifs]
[ 430.513350] cifs_readv_from_socket+0x220/0x250 [cifs]
[ 430.515464] cifs_read_from_socket+0x4a/0x70 [cifs]
[ 430.517452] ? try_to_wake_up+0x212/0x650
[ 430.519122] ? cifs_small_buf_get+0x16/0x30 [cifs]
[ 430.521086] ? allocate_buffers+0x66/0x120 [cifs]
[ 430.523019] cifs_demultiplex_thread+0xdc/0xc30 [cifs]
[ 430.525116] kthread+0xfb/0x130
[ 430.526421] ? cifs_handle_standard+0x190/0x190 [cifs]
[ 430.528514] ? kthread_park+0x90/0x90
[ 430.530019] ret_from_fork+0x35/0x40
Fix this by obtaining extra references for mids being retried
and marking them as MID_DELETED which indicates that such a mid
has been dequeued from the pending list.
Also move mid cleanup logic from DeleteMidQEntry to
_cifs_mid_q_entry_release which is called when the last reference
to a particular mid is put. This allows to avoid any use-after-free
of response buffers.
The patch needs to be backported to stable kernels. A stable tag
is not mentioned below because the patch doesn't apply cleanly
to any actively maintained stable kernel.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-and-tested-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We only want to avoid blocking in connect when mounting SMB root
filesystems, otherwise bail out from generic_ip_connect() so cifs.ko
can perform any reconnect failover appropriately.
This fixes DFS failover/reconnection tests in upstream buildbot.
Fixes: 8eecd1c2e5 ("cifs: Add support for root file systems")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Message was intended only for developer temporary build
In addition cleanup two minor warnings noticed by Coverity
and a trivial change to workaround a sparse warning
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Now that sparse has been fixed, it spotted a couple recent minor
endian errors (and removed one additional sparse warning).
Thanks to Luc Van Oostenryck for his help fixing sparse.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Introduce a new CONFIG_CIFS_ROOT option to handle root file systems
over a SMB share.
In order to mount the root file system during the init process, make
cifs.ko perform non-blocking socket operations while mounting and
accessing it.
Cc: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
In some cases to work around server bugs or performance
problems it can be helpful to be able to disable requesting
SMB2.1/SMB3 leases on a particular mount (not to all servers
and all shares we are mounted to). Add new mount parm
"nolease" which turns off requesting leases on directory
or file opens. Currently the only way to disable leases is
globally through a module load parameter. This is more
granular.
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Displayed in /proc/fs/cifs/Stats once for each
socket we are connected to.
This allows us to find out what the maximum number of
requests that had been in flight (at any one time). Note that
/proc/fs/cifs/Stats can be reset if you want to look for
maximum over a small period of time.
Sample output (immediately after mount):
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 5 maximum at one time: 2
Max requests in flight: 2
1) \\localhost\scratch
SMBs: 18
Bytes read: 0 Bytes written: 0
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Disable offload of the decryption of encrypted read responses
by default (equivalent to setting this new mount option "esize=0").
Allow setting the minimum encrypted read response size that we
will choose to offload to a worker thread - it is now configurable
via on a new mount option "esize="
Depending on which encryption mechanism (GCM vs. CCM) and
the number of reads that will be issued in parallel and the
performance of the network and CPU on the client, it may make
sense to enable this since it can provide substantial benefit when
multiple large reads are in flight at the same time.
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add new mount option "signloosely" which enables signing but skips the
sometimes expensive signing checks in the responses (signatures are
calculated and sent correctly in the SMB2/SMB3 requests even with this
mount option but skipped in the responses). Although weaker for security
(and also data integrity in case a packet were corrupted), this can provide
enough of a performance benefit (calculating the signature to verify a
packet can be expensive especially for large packets) to be useful in
some cases.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If the server config (e.g. Samba smb.conf "csc policy = disable)
for the share indicates that the share should not be cached, log
a warning message if forced client side caching ("cache=ro" or
"cache=singleclient") is requested on mount.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
