- Under SRIOV, SDMA engine is shared between VFs. Therefore,
we will not stop SDMA during hw_fini. This is not an issue
with normal dirver loading and unloading.
- However, when we put the SDMA engine to suspend state and resume
it, the issue starts to show up. Something could attempt to use
that SDMA engine to clear or move memory before the engine is
initialized since the DRM entity is still there.
- Therefore, we will call sdma_v5_2_enable(false) during hw_fini,
and if we are under SRIOV, we will call sdma_v5_2_enable(true)
afterwards to allow other VFs to use SDMA. This way, the DRM
entity of SDMA engine is emptied and it will follow the flow
of resume code path.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The OTG_MASTER_UPDATE_LOCK_SEL is used for GSL and OTGs in the same
group for selecting the OTG_MASTER_UPDATE_LOCK from the same OTG. At
some point, it a check was added to see if OTG is running or not, which
is not necessary, and for this reason, this commit dropped that check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multiple parts of the DCN code, we write directly to the
OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using
the set_vtotal_min_max.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The struct timing_generator_funcs provides a hook for setting up the
maximum possible vertical dimension of display for OTG, as the panel
supports. DCN10 has a standard function named optc1_set_vtotal_min_max
which all ASICs can use to set the aforementioned hook. Since we did not
set it for DCN20, this commit initializes the set_vtotal_min_max with
the DCN10 function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dpia hpd interrupt processing is disabled when entering S4/S0i3 and
would be reenabled after detection completes during resuming. Because,
keeping hpd interrupts enabled during detection leads to multiple
detections for the same hpd transition. There is a S4 case where dpia
hpd interrupt is missed when driver is in transitioning from hpd
interrupt processing disable to enable and the display does not light
up.
[How]
- Added dmub inbox command DMUB_CMD__DPIA_HPD_INT_ENABLE to explicitly
control dmub to issue dpia hpd interrupt or not. If dpia hpd interrupt
is disabled, dmub will keep the hpd pending and post it once driver
reenables dpia hpd interrupt or when querying with
DMUB_CMD__QUERY_HPD_STATE.
- Added dmub boot option dpia_hpd_int_enable_supported to notify dmub
about whether DMUB_CMD__DPIA_HPD_INT_ENABLE command would be used.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since different features would need to update cursor registers, However,
they would use different approaches.
To unify varied methods, this refactor is implemented the same update
cursor info method for current varied features.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
FCLK pstate allow message should not be dependent on local
"update_fclk".
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Acquire FCLK DPM levels to properly construct DML clock limits. Further
add new logic to keep number of indices for each clock in clk_mgr.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before enabling new crtc, stream_count in dc_state does not sync with
that in drm_atomic_state. Validating dsc in such case would leave newly
added stream not jointly participating in dsc optimization with existing
streams, but simply using default initialized vcpi all the time which
gives wrong dsc determination decision.
Consider the scenaio where one 4k60 connected to the dock under dp-alt mode.
Since dp-alt mode is 2-lane setup, stream 1 consumes 63 slots with dsc needed.
Then hook up a second 4k60 to the dock.
stream 2 connected with 65 slot initialized by default without dsc. dsc
pre validate will not jointly optimize stream 2 with stream 1 before
crtc 2 added into the dc_state. That leads to stream 2 not getting dsc
optimization, and trigger atomic_check failure all the time, as 65 > 63
limit.
After getting all new crtcs added into the state, stream_count in
dc_state correctly reflect that in drm_atomic_state which comes up with
correct dsc decision.
Fixes: 71be4b16d3 ("drm/amd/display: dsc validate fail not pass to atomic check")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why & How]
Add a helper to map ODM/MPC/Multi-Plane resources from DC
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- add support for FDPIC and static PIE executable formats for noMMU
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmNEg54THGpjbXZia2Jj
QGdtYWlsLmNvbQAKCRBR+cyR+D+gRDZHD/9FqjYXY16y66WRKbUN4DCzzYLuxWBV
3mSdZyqjw+AB24XBbY4i81ppvdyTnA3i2nNrbjq6OWIp9uWUyGXdw+dnmGRlgulc
EJLyRBbaal1YD+Tohn8n4sAuE8zpOtL1PHIb2Z7CySXVSNV7JxvIyUD43o9bUW45
Qse0BWGq1hZHmFWeJ4J8K4NDAPxMEWCOrIbqjyEMODKOUy0zKWw1OT7fKDMEP/zm
7H5o9k1QD0AcZPVAUGDq6PChSxjv8avAfD635UzvsYPpd/6ovnNT3bTrApARErdv
XwgtVPcMEQ8oEr6ALAQGlmu092Cb9jwXZFnaYW1GBG8m6uT6BXybWf69zF8l6RrG
lKcPc6F9HpHNR8ukfJ3pnEiHBGPQhu3lA6WDj9+URKY+BSbBDa3jtpf8p3uTRktb
SfK7EXl9MSYfSq/tPqVLWL71L97Kx1n4OxylqU+UU0+SSfm6buZSsAMKPCUOjdKI
SvTDFUk3XKIARAnT8KD8Nj1opmpRHSAi5r6LXpu6v2/InBx7SrGzVuh05yJ2jGUO
0qeiDKTKTg254oUlnW9yVXkxrcu2THar17v4YgA6zu/zk5sOJSebCLly9upX+q4C
oIXGSPB5UQi+cluEfYpvAo42YTONuDSaA/p26EeUhnBsbgIhInTi3zLWKXYWwezC
YSQAsD1mOZICxg==
=quUm
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20221010' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- add support for FDPIC and static PIE executable formats for noMMU
* tag 'xtensa-20221010' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add FDPIC and static PIE support for noMMU
xtensa: clean up ELF_PLAT_INIT macro
[Why]
Diagnostics reports exceptions generated when timeout waiting for
DISPCLK frequency divider change expires when testing ODM4to1.
Diagnostics reports exceptions generated when timeout waiting for OTG
busy status expires when disabling OTG during ODM4to1 test.
[How]
Increase HW status waiting time for DISPCLK frequency divider change and
OTG busy status when disable OTG.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Doing timing sync seqence for phantom pipes will not go through since
they are not fully programmed like normal pipes. Skip the sequence on
such pipes
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
Currently phy_pix_clk is used to program DTO's which is incorrect.
[How?]
Use the timing pixel clock to program DTO's correctly.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
bug was caused when moving variable from stack to
heap because it was reusable and garbage was left
over, so we need to zero mem
Fixes: 7acc487ab5 ("drm/amd/display: reduce stack size in dcn32 dml (v2)")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Bandwidth validation is using Freesync parameters
from previous Freesync state.
Bandwidth validation ignores DCFCLK calculated
after Freesync parameters are configured
[How]
Set Freesync bandwidth parameters to its default
state before running bandwidth validation.
Take DCFCLK calculated after Freesync bandwidth
parameters are assigned and bandwidth is
recalculated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Request from PMFW to change the messaging format to specify whether we
support z-state via individual bits.
[How]
Update the args we pass in the support message.
Fixes: d5c6909e74 ("drm/amd/display: Add DCN314 clock manager")
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0
[Why]
If psr_feature_enable is set to true by default, it continues to be enabled
for non capable links.
[How]
explicitly disable the feature on links that are not capable of the same.
Fixes: 8c322309e4 ("drm/amd/display: Enable PSR")
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
9k mtu perf improvements
vdpa feature provisioning
virtio blk SECURE ERASE support
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNAvcMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpYaMH/0hv6q1D35lLinVn4DSz8ru754picK9Pg8Vv
dJG8w0v3VN1lHLBQ63Gj9/M47odCq8JeeDwmkzVs3C2I3pwLdcO1Yd+fkqGVP7gd
Fc7cyi87sk4heHEm6K5jC17gf3k39rS9BkFbYFyPQzr/+6HXx6O/6x7StxvY9EB0
nst7yjPxKXptF5Sf3uUFk4YIFxSvkmvV292sLrWvkaMjn71oJXqsr8yNCFcqv/jk
KM7C8ZCRuydatM+PEuJPcveJd04jYuoNS3OZDCCWD6XuzLROQ10PbLBBqoHLEWu7
wZbY4WndJSqnRE3dx0Xm8LgKNPOBxVfDoD3RVejxW6JF9hmGcG8=
=PIpt
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- 9k mtu perf improvements
- vdpa feature provisioning
- virtio blk SECURE ERASE support
- fixes and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: don't try to use intxif pin is zero
vDPA: conditionally read MTU and MAC in dev cfg space
vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill
vDPA: check virtio device features to detect MQ
vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence
vDPA: only report driver features if FEATURES_OK is set
vDPA: allow userspace to query features of a vDPA device
virtio_blk: add SECURE ERASE command support
vp_vdpa: support feature provisioning
vdpa_sim_net: support feature provisioning
vdpa: device feature provisioning
virtio-net: use mtu size as buffer length for big packets
virtio-net: introduce and use helper function for guest gso support checks
virtio: drop vp_legacy_set_queue_size
virtio_ring: make vring_alloc_queue_packed prettier
virtio_ring: split: Operators use unified style
vhost: add __init/__exit annotations to module init/exit funcs
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmNDMCsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXpmUB/4k6V0JlLc9kxClxK8KCzAasby5hnGz
EPOXyFi6ff1CSiMdpV+oWh/ENQr8lSQYsj6esMNNRr4DLDJ9o6NGtdK05HzizCjs
KwHlvjF0eRsr60zSIySdeAwPyEyupqcpkLSF6oGi53f6OQuC2LDQa/h7FMnSKgxD
TFzkWbFAf1kl/nQTUenxTh+u16umaKsedrD9tQli1vIyhltQbu9Hw2gAV1vWxdKO
Md6BRwaMMz5Lffs6eM2ULlyxNzK1Pk1LWdPeNVHHIeBVxI+YMememFCOA5BBXLXk
QlVGIPtbyHtryK9DRFyhk9UWgdAZIBCDHxBOqXXySOGA+Kc7/DK5zCeB
=f55l
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Remove unnecessary delay while probing for VMBus (Stanislav
Kinsburskiy)
- Optimize vmbus_on_event (Saurabh Sengar)
- Fix a race in Hyper-V DRM driver (Saurabh Sengar)
- Miscellaneous clean-up patches from various people
* tag 'hyperv-next-signed-20221009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Replace kmap() with kmap_local_page()
drm/hyperv: Add ratelimit on error message
hyperv: simplify and rename generate_guest_id
Drivers: hv: vmbus: Split memcpy of flex-array
scsi: storvsc: remove an extraneous "to" in a comment
Drivers: hv: vmbus: Don't wait for the ACPI device upon initialization
Drivers: hv: vmbus: Use PCI_VENDOR_ID_MICROSOFT for better discoverability
Drivers: hv: vmbus: Fix kernel-doc
drm/hyperv: Don't overwrite dirt_needed value set by host
Drivers: hv: vmbus: Optimize vmbus_on_event
- Use platform data to get the sensor ID instead of parsing the device
in imx_sc thermal driver and remove the dedicated OF function from
the core code (Daniel Lezcano).
- Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
Cameron).
- Add missing const annotation to the RCar ops thermal driver (Lad
Prabhakar).
- Drop duplicate parameter check from
thermal_zone_device_register_with_trips() (Lad Prabhakar).
- Fix NULL pointer dereference in trip_point_temp_store() by making it
check if the ->set_trip_temp() operation is present (Lad Prabhakar).
- Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
driver (Vincent Knecht).
-----BEGIN PGP SIGNATURE-----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=BrtK
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These fix assorted issues in the thermal core and ARM thermal drivers.
Specifics:
- Use platform data to get the sensor ID instead of parsing the
device in imx_sc thermal driver and remove the dedicated OF
function from the core code (Daniel Lezcano).
- Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan
Cameron).
- Add missing const annotation to the RCar ops thermal driver (Lad
Prabhakar).
- Drop duplicate parameter check from
thermal_zone_device_register_with_trips() (Lad Prabhakar).
- Fix NULL pointer dereference in trip_point_temp_store() by making
it check if the ->set_trip_temp() operation is present (Lad
Prabhakar).
- Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal
driver (Vincent Knecht)"
* tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
thermal/core: Add a check before calling set_trip_temp()
thermal/core: Drop valid pointer check for type
thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops
thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS
thermal/of: Remove the thermal_zone_of_get_sensor_id() function
thermal/drivers/imx_sc: Rely on the platform data to get the resource id
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
* Add support for two new platforms (Zhang Rui).
* Adjust energy unit for Sapphire Rapids (Zhang Rui).
* Do not dump TRL if turbo is not supported (Artem Bityutskiy).
-----BEGIN PGP SIGNATURE-----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=IsN+
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more consistent
and drop redundant code from it (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=pwnm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix two issues, in APEI and in the int3472 driver, clean up the
ACPI thermal driver, add ACPI support for non-GPE system wakeup events
and make the system reboot code use the S5 (system off) state by
default.
Specifics:
- Fix ACPI device object reference counting in (recently updated)
skl_int3472_fill_clk_pdata() (Andy Shevchenko).
- Fix a memory leak in APEI by avoiding to add a task_work to kernel
threads running when an asynchronous error is detected (Shuai Xue).
- Add ACPI support for handling system wakeups via GPIO wake capable
IRQs in addition to GPEs (Raul E Rangel).
- Make the system reboot code put ACPI-enabled systems into the S5
(system off) state which is necessary for some platforms to work as
expected (Kai-Heng Feng).
- Make the white space usage in the ACPI thermal driver more
consistent and drop redundant code from it (Rafael Wysocki)"
* tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: thermal: Drop some redundant code
ACPI: thermal: Drop redundant parens from expressions
ACPI: thermal: Use white space more consistently
platform/x86: int3472: Don't leak reference on error
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
PM: ACPI: reboot: Reinstate S5 for reboot
kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode
ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle
i2c: acpi: Use ACPI wake capability bit to set wake_irq
ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=c13m
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
Including:
- Removal of the bus_set_iommu() interface which became
unnecesary because of IOMMU per-device probing
- Make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- Support for AMD IOMMUv2 page-tables for the DMA-API layer. The
v2 page-tables are compatible with the x86 CPU page-tables.
Using them for DMA-API prepares support for hardware-assisted
IOMMU virtualization
- Support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- Some smaller fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=h0sT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- remove the bus_set_iommu() interface which became unnecesary because
of IOMMU per-device probing
- make the dma-iommu.h header private
- Intel VT-d changes from Lu Baolu:
- Decouple PASID and PRI from SVA
- Add ESRTPS & ESIRTPS capability check
- Cleanups
- Apple DART support for the M1 Pro/MAX SOCs
- support for AMD IOMMUv2 page-tables for the DMA-API layer.
The v2 page-tables are compatible with the x86 CPU page-tables. Using
them for DMA-API prepares support for hardware-assisted IOMMU
virtualization
- support for MT6795 Helio X10 M4Us in the Mediatek IOMMU driver
- some smaller fixes and cleanups
* tag 'iommu-updates-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits)
iommu/vt-d: Avoid unnecessary global DMA cache invalidation
iommu/vt-d: Avoid unnecessary global IRTE cache invalidation
iommu/vt-d: Rename cap_5lp_support to cap_fl5lp_support
iommu/vt-d: Remove pasid_set_eafe()
iommu/vt-d: Decouple PASID & PRI enabling from SVA
iommu/vt-d: Remove unnecessary SVA data accesses in page fault path
dt-bindings: iommu: arm,smmu-v3: Relax order of interrupt names
iommu: dart: Support t6000 variant
iommu/io-pgtable-dart: Add DART PTE support for t6000
iommu/io-pgtable: Add DART subpage protection support
iommu/io-pgtable: Move Apple DART support to its own file
iommu/mediatek: Add support for MT6795 Helio X10 M4Us
iommu/mediatek: Introduce new flag TF_PORT_TO_ADDR_MT8173
dt-bindings: mediatek: Add bindings for MT6795 M4U
iommu/iova: Fix module config properly
iommu/amd: Fix sparse warning
iommu/amd: Remove outdated comment
iommu/amd: Free domain ID after domain_flush_pages
iommu/amd: Free domain id in error path
iommu/virtio: Fix compile error with viommu_capable()
...
DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for
compatible strings used in kernel sources against compatible strings
in DT schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems
-----BEGIN PGP SIGNATURE-----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=IDIz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYzylIxIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9IDBwEAmoMCHzq2JseDBj21H5iLXrB2G5Vl80a9
UW363r09ht4A/RnvCIdFcaYYdawhQbcBWkRSYezDOPu6hopwrElb9+ID
=l5my
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
From Phil Auld:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
From me:
cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
From me:
lib: optimize find_bit() functions
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
From me:
lib/find: add find_nth_bit()
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
From me:
cpumask: repair cpumask_check()
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
From Valentin Schneider:
bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
Extends the API with one more function and applies it in sched/core.
-----BEGIN PGP SIGNATURE-----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=Q/+F
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is
more than just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through
a cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to
avoid retpolines.
- Add a way to wake up ring buffer waiters waiting for the
ring buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled.
A reader may block when the ring buffer is disabled,
but if it was blocked when the ring buffer is disabled
it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages
Fixes splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer
wait queue actually the longest.
- Fix a race in the ring buffer between resetting a page when
a writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at
boot up before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when
enabling a tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- And other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYz70cxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpLKAP4+yOje7ZY/b3R4tTx0EIWiKdhqPx6t
Nvam2+WR2PN3QQEAqiK2A+oIbh3Zjp1MyhQWuulssWKtSTXhIQkbs7ioYAc=
=MsQw
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is more than
just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through a
cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to avoid
retpolines.
- Add a way to wake up ring buffer waiters waiting for the ring
buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled. A reader may
block when the ring buffer is disabled, but if it was blocked when
the ring buffer is disabled it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages. This fixes
splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer wait
queue actually the longest.
- Fix a race in the ring buffer between resetting a page when a
writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at boot up
before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when enabling a
tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- Other minor clean ups and fixes"
* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
ftrace: Create separate entry in MAINTAINERS for function hooks
tracing: Update MAINTAINERS to reflect new tracing git repo
tracing: Do not free snapshot if tracer is on cmdline
ftrace: Still disable enabled records marked as disabled
tracing/user_events: Move pages/locks into groups to prepare for namespaces
tracing: Add Masami Hiramatsu as co-maintainer
tracing: Remove unused variable 'dups'
MAINTAINERS: add myself as a tracing reviewer
ring-buffer: Fix race between reset page and reading page
tracing/user_events: Update ABI documentation to align to bits vs bytes
tracing/user_events: Use bits vs bytes for enabled status page data
tracing/user_events: Use refcount instead of atomic for ref tracking
tracing/user_events: Ensure user provided strings are safely formatted
tracing/user_events: Use WRITE instead of READ for io vector import
tracing/user_events: Use NULL for strstr checks
tracing: Fix spelling mistake "preapre" -> "prepare"
tracing: Wake up waiters when tracing is disabled
tracing: Add ioctl() to force ring buffer waiters to wake up
tracing: Wake up ring buffer waiters on closing of the file
ring-buffer: Add ring_buffer_wake_waiters()
...
Just some boring cleanups on the sysctl front for this release.
This has been on linux-next for at least 4 weeks now.
-----BEGIN PGP SIGNATURE-----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=TEFw
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Just some boring cleanups on the sysctl front for this release"
* tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred}
kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c
sysctl: remove max_extfrag_threshold
kernel/sysctl.c: remove unnecessary (void*) conversions
proc: remove initialization assignment
This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 99bd995655 ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's only two pathes queued up for v6.1 for modules, these have
been grinding on linux-next for at least 4 weeks now:
* David Disseldorp's minor enhancement for sysfs compression string
* Aaron Tomlin's debugfs interface to view unloaded tainted modules
But there are other changes queued up for testing for the next merge
window already. One change being still discussed, and *not* yet even close
to testing on linux-next, but worth mentioning to put on your radar is
the generalization of the bpf prog_pack thing. The idea with that is to
generalize the iTLB gains seen with using huge pages on eBPF to other text
uses on the kernel (modules, ftrace, kprobes). Song Liu is doing a good job
following up on that difficult task as the semantics for the special
permissions are crap, and it really hasn't been easy to put all this
together. The latest effort can be read on his vmalloc_exec() patch
series [0].
Aaron will have a fix posted soon for the debugfs interface for unloaded
modules, when that comes I'll just bounce that to you as it should be
merged.
[0] https://lkml.kernel.org/r/20220818224218.2399791-1-song@kernel.org
-----BEGIN PGP SIGNATURE-----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=g/mg
-----END PGP SIGNATURE-----
Merge tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
- minor enhancement for sysfs compression string (David Disseldorp)
- debugfs interface to view unloaded tainted modules (Aaron Tomlin)
* tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module/decompress: generate sysfs string at compile time
module: Add debugfs interface to view unloaded tainted modules
Somehow, there remains a link to gmane.org, which stopped working
in 2016, in howto.rst. Replace it with the one at lore.kernel.org.
Do the same changes under translations/ as well.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Cc: Alex Shi <alexs@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Hu Haowen <src.res@email.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Link: https://lore.kernel.org/r/20220930021936.26238-1-akiyks@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc. in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing particular
sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
-----BEGIN PGP SIGNATURE-----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=DHiN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
The kernel size changes due to many factors, such as compiler
version, configuration, and the build environment. This makes
size comparison figures irrelevant to reader's setup.
Remove these figures and describe the effects of page owner
to the kernel size in general instead.
Thanks for Jonathan Corbet, Bagas Sanjaya and Mike Rapoport's
constructive suggestions.
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Link: https://lore.kernel.org/r/20221005145525.10359-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since a patch set in my translation devicetree
introduce some build warnings:
Warning: Documentation/translations/zh_CN/devicetree/changesets.rst
references a file that doesn't exist:
Documentation/Devicetree/changesets.rst
...
Change the first letter of Devicetree to lowercase.
Fixes: 9485acfded ("docs/zh_CN: add dt kernel-api translation")
Fixes: f773455ce5 ("docs/zh_CN: add dt overlay-notes translation")
Fixes: 5e38432db8 ("docs/zh_CN: add dt dynamic-resolution-notes translation")
Fixes: 330f5a3005 ("docs/zh_CN: add dt changesets translation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/20221008094139.314151-1-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The documentation gives an example for opening trace marker with
write-only mode, but the flag WR_ONLY is not defined by glibc.
Use O_WRONLY to replace it.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221008083250.3160-1-leo.yan@linaro.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----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=+qS1
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Fix race between fork and livepatch transition revert
- Add sysfs entry that shows "patched" state for each object (module)
that can be livepatched by the given livepatch
- Some clean up
* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add sysfs test
livepatch: add sysfs entry "patched" for each klp_object
selftests/livepatch: normalize sysctl error message
livepatch: Add a missing newline character in klp_module_coming()
livepatch: fix race between fork and KLP transition
-----BEGIN PGP SIGNATURE-----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=xERg
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Initialize pointer hashing using the system workqueue. It avoids
taking locks in printk()/vsprintf() code path
- Misc code clean up
* tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Mark __printk percpu data ready __ro_after_init
printk: Remove bogus comment vs. boot consoles
printk: Remove write only variable nr_ext_console_drivers
printk: Declare log_wait properly
printk: Make pr_flush() static
lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.
lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().
lib/vnsprintf: add const modifier for param 'bitmap'
* cpuset now support isolated cpus.partition type, which will enable dynamic
CPU isolation.
* pids.peak added to remember the max number of pids used.
* Holes in cgroup namespace plugged.
* Internal cleanups.
Note that for-6.1-fixes was pulled into for-6.1 twice. Both were for
follow-up cleanups and each merge commit has details.
Also, 8a693f7766 ("cgroup: Remove CFTYPE_PRESSURE") removes the flag used
by PSI changes in the tip tree and the merged result won't compile due to
the missing flag. Simply removing the struct init lines specifying the flag
is the correct resolution. linux-next already contains the correct fix:
https://lkml.kernel.org/r/20220912161812.072aaa3b@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYzsl7w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYsxAP4kad4YPw+CueLyyEMiYgBHouqDt8cG0+FJWK3X
svTC7wD/eCLfxZM8TjjSrMmvaMrml586mr3NoQaFeW0x3twptQQ=
=LERu
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
-----BEGIN PGP SIGNATURE-----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=KGwF
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Huawei reported that when they updated their kernel from 4.4 to
something much newer, some userspace code they had broke, the culprit
being the accidental removal of O_NONBLOCK from /dev/random way back
in 5.6. It's been gone for over 2 years now and this is the first
we've heard of it, but userspace breakage is userspace breakage, so
O_NONBLOCK is now back.
- Use randomness from hardware RNGs much more often during early boot,
at the same interval that crng reseeds are done, from Dominik.
- A semantic change in hardware RNG throttling, so that the hwrng
framework can properly feed random.c with randomness from hardware
RNGs that aren't specifically marked as creditable.
A related patch coming to you via Herbert's hwrng tree depends on
this one, not to compile, but just to function properly, so you may
want to merge this PULL before that one.
- A fix to clamp credited bits from the interrupts pool to the size of
the pool sample. This is mainly just a theoretical fix, as it'd be
pretty hard to exceed it in practice.
- Oracle reported that InfiniBand TCP latency regressed by around
10-15% after a change a few cycles ago made at the request of the RT
folks, in which we hoisted a somewhat rare operation (1 in 1024
times) out of the hard IRQ handler and into a workqueue, a pretty
common and boring pattern.
It turns out, though, that scheduling a worker from there has
overhead of its own, whereas scheduling a timer on that same CPU for
the next jiffy amortizes better and doesn't incur the same overhead.
I also eliminated a cache miss by moving the work_struct (and
subsequently, the timer_list) to below a critical cache line, so that
the more critical members that are accessed on every hard IRQ aren't
split between two cache lines.
- The boot-time initialization of the RNG has been split into two
approximate phases: what we can accomplish before timekeeping is
possible and what we can accomplish after.
This winds up being useful so that we can use RDRAND to seed the RNG
before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
addition to other early uses of randomness. The effect is that
systems with RDRAND (or a bootloader seed) will never see any
warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
kfence benefits from getting a better seed of its own.
- Small systems without much entropy sometimes wind up putting some
truncated serial number read from flash into hostname, so contribute
utsname changes to the RNG, without crediting.
- Add smaller batches to serve requests for smaller integers, and make
use of them when people ask for random numbers bounded by a given
compile-time constant. This has positive effects all over the tree,
most notably in networking and kfence.
- The original jitter algorithm intended (I believe) to schedule the
timer for the next jiffy, not the next-next jiffy, yet it used
mod_timer(jiffies + 1), which will fire on the next-next jiffy,
instead of what I believe was intended, mod_timer(jiffies), which
will fire on the next jiffy. So fix that.
- Fix a comment typo, from William.
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: clear new batches when bringing new CPUs online
random: fix typos in get_random_bytes() comment
random: schedule jitter credit for next jiffy, not in two jiffies
prandom: make use of smaller types in prandom_u32_max
random: add 8-bit and 16-bit batches
utsname: contribute changes to RNG
random: use init_utsname() instead of utsname()
kfence: use better stack hash seed
random: split initialization into early step and later step
random: use expired timer rather than wq for mixing fast pool
random: avoid reading two cache lines on irq randomness
random: clamp credited irq bits to maximum mixed
random: throttle hwrng writes if no entropy is credited
random: use hwgenerator randomness more frequently at early boot
random: restore O_NONBLOCK support
