Commit graph

85 commits

Author SHA1 Message Date
David Brownell
72e7ae8141 [ARM] 4823/1: AT91 section fix
Fix section warning:

 WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference
        from the function init_programmable_clock()
        to the function .init.text:at91_css_to_clk()
 The function  init_programmable_clock() references
 the function __init at91_css_to_clk().
 This is often because init_programmable_clock lacks a __init
 annotation or the annotation of at91_css_to_clk is wrong.

In this case the only calls to and from init_programmable_clock()
are from code marked as "__init", so this fix is trivially correct.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Uwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-09 22:43:15 +00:00
David Brownell
a9a84c37d1 atmel_lcdfb: backlight control
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from
the LCD controller.  It's controlled by "contrast" registers though.

This patch lets boards declare that they have that kind of backlight
control.  The driver can then export this control, letting screenblank and
other operations actually take effect ...  reducing the typically
substantial power drain from the backlight.

Note that it's not fully cooked
  - doesn't force backlight off during system suspend
  - the "power" and "blank" events may not be done right
This should be easily added in the future.

[nicolas.ferre@atmel.com: remove unneeded inline and rename functions]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:16 -08:00
Russell King
0d899e1b00 Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into devel
* at91:
  [ARM] 4802/1: Fix typo and remove vague comment
  [ARM] 4660/3: at91: allow selecting UART for early kernel messages
  [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work

* ixp:
  [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c
  [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c
  [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c
  [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards
  [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
  [ARM] 4715/2: Ethernet support for IXDP425 boards
  [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers
  [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features
  [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits
  [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info
  [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info
  [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info
  [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board
  [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board
  [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h
  [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards

* master:
  [ARM] 4810/1: - Fix 'section mismatch' building warnings
  [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking
  [ARM] 21285 serial: fix build error

* misc:
  [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags

* pxa:
  [ARM] 4798/1: pcm027: fix missing header file
  [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1
  [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h
  [ARM] pxa: introduce sysdev for pxa3xx static memory controller
  [ARM] pxa: add preliminary suspend/resume code for pxa3xx
  [ARM] pxa: introduce sysdev for GPIO register saving/restoring
  [ARM] pxa: introduce sysdev for IRQ register saving/restoring
  [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data"
  [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass

* realview:
  [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option
  [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c
  [ARM] 4820/1: RealView: Select the timer IRQ at run-time
  [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms
  [ARM] 4818/1: RealView: Add core-tile detection
  [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c
  [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h
  [ARM] 4815/1: RealView: Add clockevents suport for the local timers
  [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore
  [ARM] 4813/1: Add SMP helper functions for clockevents support
  [ARM] 4812/1: RealView: clockevents support for the RealView platforms
  [ARM] 4811/1: RealView: clocksource support for the RealView platforms
2008-02-04 17:54:39 +00:00
Guennadi Liakhovetski
fa3218d859 [ARM] 4660/3: at91: allow selecting UART for early kernel messages
Currently early kernel messages, i.e., those from uncompression, go to the
debugging UART. And if it is enabled in the platform configuration, but
not initialized by the bootloader, the machine hangs, waiting for UART
status change. Besides, having those messages on another UART - typically
the console UART - may be preferrable. This patch allows selecting the
UART in kernel configuration.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:16:39 +00:00
David Brownell
e83aff58bf [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work
On the at91sam9263, IRQs for GPIO banks C and D don't currently work.
This is because banks C, D, and E share one clock and toplevel IRQ, but
the AT91 code setting up and handling GPIO IRQs expects no sharing.
This patch:

 - Fixes GPIO IRQ setup and handling to cope with GPIO banks that are
   shared like on sam9263 chips, by setting up a list of those banks
   and making the IRQ dispatching logic scan that list.

 - Precomputes the address of each bank's registers, saving it with
   other per-bank data so that it no longer needs to be constantly
   recomputed during IRQs and other GPIO operations.  That shrinks
   hot-path code, while helping the GPIO bank irq updates.

 - Fixes a minor bug where IRQ_TYPE_NONE was wrongly rejected (it just
   means "use the default", which is "both edges" here).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:16:39 +00:00
Peter Zijlstra
66a2c077c3 [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking
move update_process_times() out from under xtime_lock.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:14:07 +00:00
Rafael J. Wysocki
c697eecebc Suspend: Introduce begin() and end() callbacks
On ACPI systems the target state set by acpi_pm_set_target() is
reset by acpi_pm_finish(), but that need not be called if the
suspend fails.  All platforms that use the .set_target() global
suspend callback are affected by analogous issues.

For this reason, we need an additional global suspend callback that
will reset the target state regardless of whether or not the suspend
is successful.  Also, it is reasonable to rename the .set_target()
callback, since it will be used for a different purpose on ACPI
systems (due to ACPI 1.0x code ordering requirements).

Introduce the global suspend callback .end() to be executed at the
end of the suspend sequence and rename the .set_target() global
suspend callback to .begin().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:56 -05:00
David Brownell
eaf858a988 [ARM] 4615/4: sam926[13]ek buttons updated
From: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>

On the at92sam9263ek board, tell the input subsystem about the buttons.
This patch is taken from Andrew Victor's at91 patchset, then updated to
match the latest kernel code and to use labels printed on the board.

Also update the at91sam9261ek buttons to cope with input changes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27 17:54:16 +00:00
Andrew Victor
86640cae60 [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:14 +00:00
Andrew Victor
2b3b3516b6 [ARM] 4764/1: [AT91] AT91CAP9 core support
Add support for Atmel's AT91CAP9 Customizable Microcontroller family.
  <http://www.atmel.com/products/AT91CAP/Default.asp>

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:13 +00:00
Christian Glindkamp
da7a42d60b [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
Currently the udc pullup is enabled by default on boot. If the device
is connected to a host at this time, the host starts the negotiation
before the udc/gadget driver is ready to handle it.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:33 +00:00
Andrew Victor
1b41bdf68a [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
Add NEW_LEDs support for the following boards:
 - Cogent CSB337
 - Atmel AT91RM9200-DK
 - Atmel AT91RM9200-EK
 - Atmel AT91SAM9263-EK

Mostly based on patch from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
2743f0c1dc [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
Due to errata regarding the handling of SPI CS0 on the AT91RM9200, the
atmel_spi driver drives CS0 from the SPI controller and not as a GPIO
pin.
We therefore need to configure CS0 for use by the controller

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
6d2a8401d2 [ARM] 4759/1: [AT91] Buttons on CSB300
Support for the 3 GPIO-connected buttons on the CSB300 board.

Based on wakeup testing code from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
a04ff1af97 [ARM] 4758/1: [AT91] LEDs
Move the LED initialization code out of the various *_devices.c files,
and into leds.c.
Also add support for NEW_LEDs.

Patch from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
c8f385a631 [ARM] 4757/1: [AT91] UART initialization
Modify the UART initialization to allow the board-initialization code
to specify which pins are connected, and which pins should therefore
be initialized.

The current at91_init_serial() will continue to work as-is, but is
marked as "deprecated" and will be removed once the board-specific
files has been updated to use the new interface.

As in the AVR32 code, we assume that the TX and RX pins will always be
initialized.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
b7b272a882 [ARM] 4756/1: [AT91] Makefile cleanup
Cleanup the main AT91 makefile.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
228235584f [ARM] 4755/1: [AT91] NAND update
Map the complete memory region (SZ_256M) as is done on the other AT91
processors.

The SMC_SMARTMEDIA bit should be set in the EBI controller to enable
the hardware NAND logic.
  (Patch from Sascha Erlacher)

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:32 +00:00
Andrew Victor
bfbc32663d [ARM] 4754/1: [AT91] SSC library support
Core support of the Atmel SSC library for all Atmel AT91 processors.

Based on David Brownell's initial patch for the AT91RM9200.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
Andrew Victor
c6686ff9df [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
Replace hard-coded DMA mask (0xffffffff) with DMA_BIT_MASK(32) as
defined in dma-mapping.h.
Set "dma_mask" field for the UART platform_devices.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
Andrew Victor
884f5a6a8d [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
Add platform_device and initialization for the RTT (Real Time Timer)
and WDT (Watchdog) integrated in the Atmel AT91SAM9 processors.

For SAM9263, register both RTT peripherals.
   [From: David Brownell <dbrownell@users.sourceforge.net>]

Provide platform_resources for RTT peripherals
  [From: David Brownell <dbrownell@users.sourceforge.net>]

Add support for RTC peripheral on AT91SAM9RL (same RTC peripherals as
AT91RM9200)
  [From: David Brownell <dbrownell@users.sourceforge.net>]

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
Andrew Victor
e292080235 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
Add support for the Image Sensor Interface (ISI) peripheral integrated
in the Atmel AT91SAM9263 processor.

Patch from MaLiK

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
Andrew Victor
f06e656fb4 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
Add support for STN LCD displays on Atmel AT91SAM9261-based boards.

Patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
David Brownell
a50d49dbb7 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
On the at92sam9263ek board, tell the MACB driver the IRQ used
by its PHY.  This patch is taken from Andrew Victor's 2.6.23-at91
patchset; it matches board schematics.  (But it's currently a NOP
since the MACB driver doesn't yet use PHY irqs.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
David Brownell
5248c65789 [ARM] 4646/1: AT91: configurable HZ, default to 128
This makes HZ configurable on AT91, following the model used on OMAP.

It defaults to a power of two on AT91rm9200 chips, avoiding rounding
errors which come from dividing a 32 KiHz clock to generate scheduler
irqs; and uses 100 on AT91sam926x chips, using MCK/16 (multi-MHZ).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Remy Bhmer <linux@bohmer.net>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:31 +00:00
Andrew Victor
7cbed2b507 [ARM] 4656/1: AT91: Tweak interrupt priorities
Slight tweaking of the default interrupt priorities (AIC) for the
integrated peripherals on the AT91RM9200, AT91SAM9260, AT91SAM9261 and
AT91SAM9263 processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:30 +00:00
Andrew Victor
5170874816 [ARM] 4610/2: AT91: Support for STN LCD on SAM9261-EK board.
Add STN LCD support on the Atmel AT91SAM9261-EK board.
Uses a black and white screen from Hitachi: SP06Q002.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:30 +00:00
Andrew Victor
b66545e7ae [ARM] 4602/3: AT91: debugfs interface to view GPIO pin state
This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to
display the basic configuration and current state of the GPIO pins on
the Atmel AT91 processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:00:30 +00:00
Jan Altenberg
430cb43610 [ARM] 4691/1: add missing i2c_board_info struct for at91rm9200
- Add missing i2c_board_info struct for at91rm9200

Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Acked-by: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-06 20:25:13 +00:00
Andrew Victor
302edfd04e [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK.
The incorrect GPIO pins are being initialized for the buttons on the
Atmel AT91SAM9261-EK board.  This buggy configuration turns LCD screen
blue...

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-26 19:41:00 +00:00
Andrew Victor
f230d3f53d [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio
The AT91 I2C driver is currently marked as "broken" due to hardware
issues.  This patch enables AT91-based platforms to also use the
bitbanged GPIO for I2C.

This updates platform setup logic (setting up an i2c-gpio device
using the same pins as the i2c-at91 device, unless only the BROKEN
driver is enabled).

Also make use of the new-style initialization of I2C devices using
i2c_register_board_info().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-26 19:40:47 +00:00
Andrew Victor
a95c729b74 [ARM] 4604/2: AT91: Master clock divistor on SAM9
The calculation for the Master clock divisor (MDIV) is different on the
SAM9 processors than on the AT91RM9200.

Orignal patch from Sascha Erlacher.

Also use the defined AT91_PMC_PRES instead of hard-coded bitmasks.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-26 19:40:25 +00:00
Robert P. J. Day
3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Rafael J. Wysocki
26398a70ea PM: Rename struct pm_ops and related things
The name of 'struct pm_ops' suggests that it is related to the power
management in general, but in fact it is only related to suspend.   Moreover,
its name should indicate what this structure is used for, so it seems
reasonable to change it to 'struct platform_suspend_ops'.   In that case, the
name of the global variable of this type used by the PM core and the names of
related functions should be changed accordingly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00
Rafael J. Wysocki
95d9ffbe01 PM: Move definition of struct pm_ops to suspend.h
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h>
to <linux/suspend.h> .

There are, at least, the following reasons to do that:
* 'struct pm_ops' is specifically related to suspend and not to the power
  management in general.
* As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it
  causes the entire kernel to be recompiled, which is unnecessary and annoying.
* Some suspend-related features are already defined in <linux/suspend.h>, so it
  is logical to move the definition of 'struct pm_ops' into there.
* 'struct hibernation_ops', being the hibernation-related counterpart of
  'struct pm_ops', is defined in <linux/suspend.h> .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00
David Brownell
5e802dfab7 [ARM] 4539/1: clocksource and clockevents for at91rm9200
GENERIC_TIME and GENERIC_CLOCKEVENTS support for the at91rm9200.

 - Oneshot mode (used for NO_HZ and high res timers) uses the
   alarm to emulate a real oneshot timer; the trickiest bit is
   how to avoid some lowlevel races.  Thanks to Remy Bohmer for
   various fixes to this code.

 - Tighten up periodic mode support using the PIT.

 - Streamline reads of the 32KHz counter.  Thanks to Marc Pignat
   for some testing results: the CRTR register has *very* odd
   behavior.  The reread appears to work around stranger glitches
   than just getting an old clock value (which would quickly
   self-correct).

 - Remove the rounding-up of tick_usec to 10.009 msec (32KiHz/100),
   since that no longer acts correct (time increases too fast).

Note that the at91sam9 and at91x40 chips need other solutions,
since they don't have the same system timer module.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by:Remy Bohmer <linux@bohmer.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:15 +01:00
Greg Ungerer
9f1ccefe3f [ARM] 4536/1: configure support for AT91x40 and EB01
Configuration support for the AT91x40 CPU and EB01 board.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:10 +01:00
Greg Ungerer
ea00e30307 [ARM] 4537/1: build support for AT91x40 and EB01
Makefile build support for the Atmel AT91x40 CPU and EB01 board support.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:09 +01:00
Greg Ungerer
d517bd012d [ARM] 4538/1: Atmel EB01 board support
Support for the Atmel EB01 board (based on the Atmel AT91x40 CPU).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:07 +01:00
Greg Ungerer
9a7e246b53 [ARM] 4535/1: AT91x40 function prototypes
Prototypes for the at91x40 CPU support functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:06 +01:00
Greg Ungerer
eb1d65aa1b [ARM] 4534/1: AT91x40 interrupt support
Interrupt setup support for the Atmel AT91x40 CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:05 +01:00
Greg Ungerer
699a714501 [ARM] 4533/1: AT91x40 timer support
Support for the timers in the Atmel AT91x40 family of CPUs.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 23:43:04 +01:00
Jan Altenberg
b8b786098b [ARM] 4542/1: AT91: include atmel_lcdc.h in at91sam926{1,3}_devices.c
- Include atmel_lcdc.h in at91sam926{1,3}_devices.c

Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-04 22:13:48 +01:00
Andrew Victor
c06911c00b [ARM] 4478/1: AT91: Convert AT91RM9200 to use atmel_spi driver
Convert the AT91RM9200 platform-setup code to use the new atmel_spi
driver (and manually-driven chip-selects), instead of the legacy
AT91-only SPI stack.

The AT91SAM9 processors are already using the atmel_spi driver.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:43:28 +01:00
David Brownell
b5b9068c1e csb337 supports "new style" rtc-ds1307
Update csb337 board specific init to support "new style" rtc-ds1307 code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:09 -07:00
Andrew Victor
d0f9b55ece [ARM] 4420/2: AT91: GPIO buttons on SAM9261-EK board
Register the GPIO-connected buttons on the SAM9261-EK board as a
"gpio-keys" platform device.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Andrew Victor
cdf95c7369 [ARM] 4379/1: AT91: LCD support on SAM9261-EK and SAM9263-EK boards
Add board-specific setup for the LCD on the Atmel AT91SAM9261-EK and
AT91SAM9263-EK boards.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Rafael J. Wysocki
2391dae3e3 PM: introduce set_target method in pm_ops
Commit 52ade9b3b9 changed the suspend code
ordering to execute pm_ops->prepare() after the device model per-device
.suspend() calls in order to fix some ACPI-related issues.  Unfortunately, it
broke the at91 platform which assumed that pm_ops->prepare() would be called
before suspending devices.

at91 used pm_ops->prepare() to get notified of the target system sleep state,
so that it could use this information while suspending devices.  However, with
the current suspend code ordering pm_ops->prepare() is called too late for
this purpose.  Thus, at91 needs an additional method in 'struct pm_ops' that
will be used for notifying the platform of the target system sleep state.
Moreover, in the future such a method will also be needed by ACPI.

This patch adds the .set_target() method to 'struct pm_ops' and makes the
suspend code call it, if implemented, before executing the device model
per-device .suspend() calls.  It also modifies the at91 code to use
pm_ops->set_target() instead of pm_ops->prepare().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
Andrew Victor
b6b27ae5e8 [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending
When suspending to slow-clock mode, at91_pm_verify_clocks() is called to
ensure that all the clocks are disabled or in the correct state.

This patch replaces the "#warning TODO" messages for the SAM9 processors
with the correct code.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:48 +01:00
Andrew Victor
1f4b49a429 [ARM] 4418/1: AT91: Number of programmable clocks differs
The number of programmable clocks available on the AT91 processors can
differ, therefore do not always display the contents of the PMC_PCKR(0)
.. PMC_PCKR(3) registers (ie, assume there are 4 clocks).

If CONFIG_AT91_PROGRAMMABLE_CLOCKS is enabled, the programmable clocks
will be registered like the other system/peripheral clocks, and the
state of the programmable clocks will be displayed like with the other
clocks.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:43 +01:00