Commit graph

1459 commits

Author SHA1 Message Date
Linus Torvalds
bdf7cf1c83 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  loop: export module parameters
  block: export blk_{get,put}_queue()
  block: remove unused variable in bio_attempt_front_merge()
  block: always allocate genhd->ev if check_events is implemented
  brd: export module parameters
  brd: fix comment on initial device creation
  brd: handle on-demand devices correctly
  brd: limit 'max_part' module param to DISK_MAX_PARTS
  brd: get rid of unused members from struct brd_device
  block: fix oops on !disk->queue and sysfs discard alignment display
2011-05-27 10:24:40 -07:00
Jens Axboe
d86e0e83b3 block: export blk_{get,put}_queue()
We need them in SCSI to fix a bug, but currently they are not
exported to modules. Export them.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-27 07:45:45 +02:00
Ben Blum
f780bdb7c1 cgroups: add per-thread subsystem callbacks
Add cgroup subsystem callbacks for per-thread attachment in atomic contexts

Add can_attach_task(), pre_attach(), and attach_task() as new callbacks
for cgroups's subsystem interface.  Unlike can_attach and attach, these
are for per-thread operations, to be called potentially many times when
attaching an entire threadgroup.

Also, the old "bool threadgroup" interface is removed, as replaced by
this.  All subsystems are modified for the new interface - of note is
cpuset, which requires from/to nodemasks for attach to be globally scoped
(though per-cpuset would work too) to persist from its pre_attach to
attach_task and attach.

This is a pre-patch for cgroup-procs-writable.patch.

Signed-off-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Reviewed-by: Paul Menage <menage@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:34 -07:00
Luca Tettamanti
700c4f3325 block: remove unused variable in bio_attempt_front_merge()
sector is never read inside the function.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:07:26 +02:00
Tejun Heo
75e3f3ee3c block: always allocate genhd->ev if check_events is implemented
9fd097b149 (block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe
drivers) removed DISK_EVENT_MEDIA_CHANGE from legacy/fringe block
drivers which have inadequate ->check_events().  Combined with earlier
change 7c88a168da (block: don't propagate unlisted DISK_EVENTs to
userland), this enables using ->check_events() for internal processing
while avoiding enabling in-kernel block event polling which can lead
to infinite event loop.

Unfortunately, this made many drivers including floppy without any bit
set in disk->events and ->async_events in which case disk_add_events()
simply skipped allocation of disk->ev, which disables whole event
handling.  As ->check_events() is still used during open processing
for revalidation, this can lead to open failure.

This patch always allocates disk->ev if ->check_events is implemented.
In the long term, it would make sense to simply include the event
structure inline into genhd as it's now used by virtually all block
devices.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Reported-by: Alex Villacis Lasso <avillaci@ceibo.fiec.espol.edu.ec>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-26 21:06:50 +02:00
Namhyung Kim
1547010e6e cfq-iosched: free cic_index if cfqd allocation fails
When struct cfq_data allocation fails, cic_index need to be freed.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:22 +02:00
Namhyung Kim
20359f27e8 cfq-iosched: remove unused 'group_changed' in cfq_service_tree_add()
The 'group_changed' variable is initialized to 0 and never changed, so
checking the variable is meaningless.

It is a leftover from 0bbfeb8320 ("cfq-iosched: Always provide group
iosolation."). Let's get rid of it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:22 +02:00
Namhyung Kim
229836bd63 cfq-iosched: reduce bit operations in cfq_choose_req()
Reduce the number of bit operations in cfq_choose_req() on average
(and worst) cases.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:21 +02:00
Namhyung Kim
b9f8ce0599 cfq-iosched: algebraic simplification in cfq_prio_to_maxrq()
Simplify the calculation in cfq_prio_to_maxrq(), plus replace CFQ_PRIO_LISTS to
IOPRIO_BE_NR since they are the same and IOPRIO_BE_NR looks more reasonable in
this context IMHO.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-24 10:23:21 +02:00
Vivek Goyal
4cbadbd16e blk-cgroup: Initialize ioc->cgroup_changed at ioc creation time
If we don't explicitly initialize it to zero, CFQ might think that
cgroup of ioc has changed and it generates lots of unnecessary calls
to call_for_each_cic(changed_cgroup). Fix it.

cfq_get_io_context()
  cfq_ioc_set_cgroup()
     call_for_each_cic(ioc, changed_cgroup)

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 19:35:04 +02:00
Vivek Goyal
95cf3dd9db block: call elv_bio_merged() when merged
Commit 73c1010119 ("block: initial patch for on-stack per-task plugging")
removed calls to elv_bio_merged() when @bio merged with @req. Re-add them.

This in turn will update merged stats in associated group. That
should be safe as long as request has got reference to the blkio_group.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Vivek Goyal
317389a773 cfq-iosched: Make IO merge related stats per cpu
Make BLKIO_STAT_MERGED per cpu hence gettring rid of need of taking
blkg->stats_lock.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Vivek Goyal
2abae55f5a cfq-iosched: Fix a memory leak of per cpu stats for root group
We allocated per cpu stats struct for root group but did not free it.
Fix it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 10:02:19 +02:00
Jens Axboe
771949d03b block: get rid of on-stack plugging debug checks
We don't need them anymore, so kill:

- REQ_ON_PLUG checks in various places
- !rq_mergeable() check in plug merging

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:52:16 +02:00
Jens Axboe
0eb8e88572 Merge branch 'for-linus' into for-2.6.40/core
This patch merges in a fix that missed 2.6.39 final.

Conflicts:
	block/blk.h
2011-05-20 20:36:16 +02:00
Vivek Goyal
af75cd3c67 blk-throttle: Make no throttling rule group processing lockless
Currently we take a queue lock on each bio to check if there are any
throttling rules associated with the group and also update the stats.
Now access the group under rcu and update the stats without taking
the queue lock. Queue lock is taken only if there are throttling rules
associated with the group.

So the common case of root group when there are no rules, save
unnecessary pounding of request queue lock.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal
f0bdc8cdd9 blk-cgroup: Make cgroup stat reset path blkg->lock free for dispatch stats
Now dispatch stats update is lock free. But reset of these stats still
takes blkg->stats_lock and is dependent on that. As stats are per cpu,
we should be able to just reset the stats on each cpu without any locks.
(Atleast for 64bit arch).

On 32bit arch there is a small race where 64bit updates are not atomic.
The result of this race can be that in the presence of other writers,
one might not get 0 value after reset of a stat and might see something
intermediate

One can write more complicated code to cover this race like sending IPI
to other cpus to reset stats and for offline cpus, reset these directly.

Right not I am not taking that path because reset_update is more of a
debug feature and it can happen only on 32bit arch and possibility of
it happening is small. Will fix it if it becomes a real problem. For
the time being going for code simplicity.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal
575969a0dd blk-cgroup: Make 64bit per cpu stats safe on 32bit arch
Some of the stats are 64bit and updation will be non atomic on 32bit
architecture. Use sequence counters on 32bit arch to make reading
of stats safe.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:53 +02:00
Vivek Goyal
5624a4e445 blk-throttle: Make dispatch stats per cpu
Currently we take blkg_stat lock for even updating the stats. So even if
a group has no throttling rules (common case for root group), we end
up taking blkg_lock, for updating the stats.

Make dispatch stats per cpu so that these can be updated without taking
blkg lock.

If cpu goes offline, these stats simply disappear. No protection has
been provided for that yet. Do we really need anything for that?

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
4843c69d49 blk-throttle: Free up a group only after one rcu grace period
Soon we will allow accessing a throtl_grp under rcu_read_lock(). Hence
start freeing up throtl_grp after one rcu grace period.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
5617cbef77 blk-throttle: Use helper function to add root throtl group to lists
Use same helper function for root group as we use with dynamically
allocated groups to add it to various lists.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
269f541555 blk-throttle: Introduce a helper function to fill in device details
A helper function for the code which is used at 2-3 places. Makes reading
code little easier.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
29b125892f blk-throttle: Dynamically allocate root group
Currently, we allocate root throtl_grp statically. But as we will be
introducing per cpu stat pointers and that will be allocated
dynamically even for root group, we might as well make whole root
throtl_grp allocation dynamic and treat it in same manner as other
groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
f469a7b4d5 blk-cgroup: Allow sleeping while dynamically allocating a group
Currently, all the cfq_group or throtl_group allocations happen while
we are holding ->queue_lock and sleeping is not allowed.

Soon, we will move to per cpu stats and also need to allocate the
per group stats. As one can not call alloc_percpu() from atomic
context as it can sleep, we need to drop ->queue_lock, allocate the
group, retake the lock and continue processing.

In throttling code, I check the queue DEAD flag again to make sure
that driver did not call blk_cleanup_queue() in the mean time.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
56edf7d75d cfq-iosched: Fix a possible race with cfq cgroup removal code
blkg->key = cfqd is an rcu protected pointer and hence we used to do
call_rcu(cfqd->rcu_head) to free up cfqd after one rcu grace period.

The problem here is that even though cfqd is around, there are no
gurantees that associated request queue (td->queue) or q->queue_lock
is still around. A driver might have called blk_cleanup_queue() and
release the lock.

It might happen that after freeing up the lock we call
blkg->key->queue->queue_ock and crash. This is possible in following
path.

blkiocg_destroy()
 blkio_unlink_group_fn()
  cfq_unlink_blkio_group()

Hence, wait for an rcu peirod if there are groups which have not
been unlinked from blkcg->blkg_list. That way, if there are any groups
which are taking cfq_unlink_blkio_group() path, can safely take queue
lock.

This is how we have taken care of race in throttling logic also.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
3e59cf9d66 cfq-iosched: Get rid of redundant function parameter "create"
Nobody seems to be using cfq_find_alloc_cfqg() function parameter "create".
Get rid of that.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
a23e686955 blk-cgroup: move some fields of unaccounted_time file under right config option
cgroup unaccounted_time file is created only if CONFIG_DEBUG_BLK_CGROUP=y.
there are some fields which are out side this config option. Fix that.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:52 +02:00
Vivek Goyal
a29a171e7c blk-throttle: Do the new group initialization with the help of a function
Group initialization code seems to be at two places. root group
initialization in blk_throtl_init() and dynamically allocated group
in throtl_find_alloc_tg(). Create a common function and use at both
the places.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:34:51 +02:00
Jens Axboe
698567f3fa Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:33:15 +02:00
James Bottomley
0a58e077eb block: add proper state guards to __elv_next_request
blk_cleanup_queue() calls elevator_exit() and after this, we can't
touch the elevator without oopsing.  __elv_next_request() must check
for this state because in the refcounted queue model, we can still
call it after blk_cleanup_queue() has been called.

This was reported as causing an oops attributable to scsi.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 19:30:32 +02:00
Shaohua Li
3ec717b7ca block: don't delay blk_run_queue_async
Let's check a scenario:
1. blk_delay_queue(q, SCSI_QUEUE_DELAY);
2. blk_run_queue_async();
the second one will became a noop, because q->delay_work already has
WORK_STRUCT_PENDING_BIT set, so the delayed work will still run after
SCSI_QUEUE_DELAY. But blk_run_queue_async actually hopes the delayed
work runs immediately.

Fix this by doing a cancel on potentially pending delayed work
before queuing an immediate run of the workqueue.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 12:24:03 +02:00
Martin K. Petersen
a934a00a69 block: Fix discard topology stacking and reporting
In some cases we would end up stacking discard_zeroes_data incorrectly.
Fix this by enabling the feature by default for stacking drivers and
clearing it for low-level drivers. Incorporating a device that does not
support dzd will then cause the feature to be disabled in the stacking
driver.

Also ensure that the maximum discard value does not overflow when
exported in sysfs and return 0 in the alignment and dzd fields for
devices that don't support discard.

Reported-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 10:37:35 +02:00
Vivek Goyal
70087dc38c blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup
Currentlly we first map the task to cgroup and then cgroup to
blkio_cgroup. There is a more direct way to get to blkio_cgroup
from task using task_subsys_state(). Use that.

The real reason for the fix is that it also avoids a race in generic
cgroup code. During remount/umount rebind_subsystems() is called and
it can do following with and rcu protection.

cgrp->subsys[i] = NULL;

That means if somebody got hold of cgroup under rcu and then it tried
to do cgroup->subsys[] to get to blkio_cgroup, it would get NULL which
is wrong. I was running into this race condition with ltp running on a
upstream derived kernel and that lead to crash.

So ideally we should also fix cgroup generic code to wait for rcu
grace period before setting pointer to NULL. Li Zefan is not very keen
on introducing synchronize_wait() as he thinks it will slow
down moun/remount/umount operations.

So for the time being atleast fix the kernel crash by taking a more
direct route to blkio_cgroup.

One tester had reported a crash while running LTP on a derived kernel
and with this fix crash is no more seen while the test has been
running for over 6 days.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-16 15:24:08 +02:00
Lukas Czerner
8af1954d17 blkdev: Do not return -EOPNOTSUPP if discard is supported
Currently we return -EOPNOTSUPP in blkdev_issue_discard() if any of the
bio fails due to underlying device not supporting discard request.
However, if the device is for example dm device composed of devices
which some of them support discard and some of them does not, it is ok
for some bios to fail with EOPNOTSUPP, but it does not mean that discard
is not supported at all.

This commit removes the check for bios failed with EOPNOTSUPP and change
blkdev_issue_discard() to return operation not supported if and only if
the device does not actually supports it, not just part of the device as
some bios might indicate.

This change also fixes problem with BLKDISCARD ioctl() which now works
correctly on such dm devices.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:30:01 -06:00
Lukas Czerner
5baebe5c86 blkdev: Simple cleanup in blkdev_issue_zeroout()
In blkdev_issue_zeroout() we are submitting regular WRITE bios, so we do
not need to check for -EOPNOTSUPP specifically in case of error. Also
there is no need to have label submit: because there is no way to jump
out from the while cycle without an error and we really want to exit,
rather than try again. And also remove the check for (sz == 0) since at
that point sz can never be zero.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:26:28 -06:00
Lukas Czerner
5dba3089ed blkdev: Submit discard bio in batches in blkdev_issue_discard()
Currently we are waiting for every submitted REQ_DISCARD bio separately,
but it can have unwanted consequences of repeatedly flushing the queue,
so we rather submit bios in batches and wait for the entire batch, hence
narrowing the window of other ios going in.

Use bio_batch_end_io() and struct bio_batch for that purpose, the same
is used by blkdev_issue_zeroout(). Also change bio_batch_end_io() so we
always set !BIO_UPTODATE in the case of error and remove the check for
bb, since we are the only user of this function and we always set this.

Remove bio_get()/bio_put() from the blkdev_issue_discard() since
bio_alloc() and bio_batch_end_io() is doing the same thing, hence it is
not needed anymore.

I have done simple dd testing with surprising results. The script I have
used is:

for i in $(seq 10); do
        echo $i
        dd if=/dev/sdb1 of=/dev/sdc1 bs=4k &
        sleep 5
done
/usr/bin/time -f %e ./blkdiscard /dev/sdc1

Running time of BLKDISCARD on the whole device:
with patch              without patch
0.95                    15.58

So we can see that in this artificial test the kernel with the patch
applied is approx 16x faster in discarding the device.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
CC: Jens Axboe <jaxboe@fusionio.com>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 19:26:27 -06:00
shaohua.li@intel.com
3ac0cc4508 block: hold queue if flush is running for non-queueable flush drive
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it.  Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue.  Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.

In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0d:

    block: make the flush insertion use the tail of the dispatch list

    It's not a preempt type request, in fact we have to insert it
    behind requests that do specify INSERT_FRONT.

which causes about 20% regression running a sysbench fileio
workload.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
shaohua.li@intel.com
f387693095 block: add a non-queueable flush flag
flush request isn't queueable in some drives. Add a flag to let driver
notify block layer about this. We can optimize flush performance with the
knowledge.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
Kees Cook
490b94be02 iosched: remove redundant sprintf
After the anticipatory scheduler was dropped, there was no need to
special-case the request_module string. As such, drop the redundant
sprintf and stack variable.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 18:02:12 -06:00
Tao Ma
addd0a09fc block: Remove 'plug/unplug' comment in blk_execute_rq_nowait
unplug is replaced with blk_run_queue now in blk_execute_rq_nowait,
so change the comment accordingly.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-05 15:10:05 -06:00
Tejun Heo
7c88a168da block: don't propagate unlisted DISK_EVENTs to userland
DISK_EVENT_MEDIA_CHANGE is used for both userland visible event and
internal event for revalidation of removeable devices.  Some legacy
drivers don't implement proper event detection and continuously
generate events under certain circumstances.  For example, ide-cd
generates media changed continuously if there's no media in the drive,
which can lead to infinite loop of events jumping back and forth
between the driver and userland event handler.

This patch updates disk event infrastructure such that it never
propagates events not listed in disk->events to userland.  Those
events are processed the same for internal purposes but uevent
generation is suppressed.

This also ensures that userland only gets events which are advertised
in the @events sysfs node lowering risk of confusion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 19:43:58 +02:00
Jens Axboe
3aa72873ff elevator: check for ELEVATOR_INSERT_SORT_MERGE in !elvpriv case too
The sort insert is the one that goes to the IO scheduler. With
the SORT_MERGE addition, we could bypass IO scheduler setup
but still ask the IO scheduler to insert the request. This would
cause an oops on switching IO schedulers through the sysfs
interface, unless the disk just happened to be idle while it
occured.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-21 19:28:35 +02:00
Tao Ma
60735b6362 block: Remove the extra check in queue_requests_store
In queue_requests_store, the code looks like
	if (rl->count[BLK_RW_SYNC] >= q->nr_requests) {
		blk_set_queue_full(q, BLK_RW_SYNC);
	} else if (rl->count[BLK_RW_SYNC]+1 <= q->nr_requests) {
		blk_clear_queue_full(q, BLK_RW_SYNC);
		wake_up(&rl->wait[BLK_RW_SYNC]);
	}
If we don't satify the situation of "if", we can get that
rl->count[BLK_RW_SYNC} < q->nr_quests. It is the same as
rl->count[BLK_RW_SYNC]+1 <= q->nr_requests.
All the "else" should satisfy the "else if" check so it isn't
needed actually.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:51:53 +02:00
Liu Yuan
ed5302d3c2 block, blk-sysfs: Fix an err return path in blk_register_queue()
We do not call blk_trace_remove_sysfs() in err return path
if kobject_add() fails. This path fixes it.

Cc: stable@kernel.org
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:51:53 +02:00
Jens Axboe
d350e6b6e8 block: remove stale kerneldoc member from __blk_run_queue()
We don't pass in a 'force_kblockd' anymore, get rid of the
stsale comment.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:34:14 +02:00
Jens Axboe
c21e6beba8 block: get rid of QUEUE_FLAG_REENTER
We are currently using this flag to check whether it's safe
to call into ->request_fn(). If it is set, we punt to kblockd.
But we get a lot of false positives and excessive punts to
kblockd, which hurts performance.

The only real abuser of this infrastructure is SCSI. So export
the async queue run and convert SCSI over to use that. There's
room for improvement in that SCSI need not always use the async
call, but this fixes our performance issue and they can fix that
up in due time.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:32:46 +02:00
Jens Axboe
5f45c69589 cfq-iosched: read_lock() does not always imply rcu_read_lock()
For some configurations of CONFIG_PREEMPT that is not true. So
get rid of __call_for_each_cic() and always uses the explicitly
rcu_read_lock() protected call_for_each_cic() instead.

This fixes a potential bug related to IO scheduler removal or
online switching.

Thanks to Paul McKenney for clarifying this.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 09:10:35 +02:00
Jens Axboe
bd900d4580 block: kill blk_flush_plug_list() export
With all drivers and file systems converted, we only have
in-core use of this function. So remove the export.

Reporteed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 22:06:57 +02:00
Christoph Hellwig
24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Jens Axboe
4521cc4ed5 block: blk_delay_queue() should use kblockd workqueue
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:36:39 +02:00