Commit graph

167 commits

Author SHA1 Message Date
Rusty Russell
e2c8806304 cpumask: Simplify sched_rt.c
find_lowest_rq() wants to call pick_optimal_cpu() on the
intersection of sched_domain_span(sd) and lowest_mask.  Rather
than doing a cpus_and into a temporary, we can open-code it.

This actually makes the code slightly clearer, IMHO.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <200911031453.15350.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 13:16:38 +01:00
Peter Williams
0d721ceadb sched: Simplify sys_sched_rr_get_interval() system call
By removing the need for it to know details of scheduling classes.

This allows PlugSched to define orthogonal scheduling classes.

Signed-off-by: Peter Williams <pwil3058@bigpond.net.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 09:53:55 +02:00
Peter Zijlstra
7d47872146 sched: Rename sync arguments
In order to extend the functions to have more than 1 flag (sync),
rename the argument to flags, and explicitly define a WF_ space for
individual flags.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:30 +02:00
Peter Zijlstra
0763a660a8 sched: Rename select_task_rq() argument
In order to be able to rename the sync argument, we need to rename
the current flag argument.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:29 +02:00
Peter Zijlstra
5f3edc1b1e sched: Hook sched_balance_self() into sched_class::select_task_rq()
Rather ugly patch to fully place the sched_balance_self() code
inside the fair class.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:04 +02:00
Peter Zijlstra
e9e9250bc7 sched: Scale down cpu_power due to RT tasks
Keep an average on the amount of time spend on RT tasks and use
that fraction to scale down the cpu_power for regular tasks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <20090901083826.287778431@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04 10:09:55 +02:00
Ingo Molnar
bcf08df3b2 sched: Fix cpupri build on !CONFIG_SMP
This build bug:

 In file included from kernel/sched.c:1765:
 kernel/sched_rt.c: In function ‘has_pushable_tasks’:
 kernel/sched_rt.c:1069: error: ‘struct rt_rq’ has no member named ‘pushable_tasks’
 kernel/sched_rt.c: In function ‘pick_next_task_rt’:
 kernel/sched_rt.c:1084: error: ‘struct rq’ has no member named ‘post_schedule’

Triggers because both pushable_tasks and post_schedule are
SMP-only fields.

Move pushable_tasks() to the SMP section and #ifdef the post_schedule use.

Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 15:15:51 +02:00
Peter Zijlstra
8f48894fcc sched: Add debug check to task_of()
A frequent mistake appears to be to call task_of() on a
scheduler entity that is not actually a task, which can result
in a wild pointer.

Add a check to catch these mistakes.

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 14:26:14 +02:00
Gregory Haskins
00aec93d10 sched: Fully integrate cpus_active_map and root-domain code
Reflect "active" cpus in the rq->rd->online field, instead of
the online_map.

The motivation is that things that use the root-domain code
(such as cpupri) only care about cpus classified as "active"
anyway. By synchronizing the root-domain state with the active
map, we allow several optimizations.

For instance, we can remove an extra cpumask_and from the
scheduler hotpath by utilizing rq->rd->online (since it is now
a cached version of cpu_active_map & rq->rd->span).

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090730145723.25226.24493.stgit@dev.haskins.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 14:26:12 +02:00
Gregory Haskins
3f029d3c6d sched: Enhance the pre/post scheduling logic
We currently have an explicit "needs_post" vtable method which
returns a stack variable for whether we should later run
post-schedule.  This leads to an awkward exchange of the
variable as it bubbles back up out of the context switch. Peter
Zijlstra observed that this information could be stored in the
run-queue itself instead of handled on the stack.

Therefore, we revert to the method of having context_switch
return void, and update an internal rq->post_schedule variable
when we require further processing.

In addition, we fix a race condition where we try to access
current->sched_class without holding the rq->lock.  This is
technically racy, as the sched-class could change out from
under us.  Instead, we reference the per-rq post_schedule
variable with the runqueue unlocked, but with preemption
disabled to see if we need to reacquire the rq->lock.

Finally, we clean the code up slightly by removing the #ifdef
CONFIG_SMP conditionals from the schedule() call, and implement
some inline helper functions instead.

This patch passes checkpatch, and rt-migrate.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 14:26:10 +02:00
Peter Zijlstra
a1ba4d8ba9 sched_rt: Fix overload bug on rt group scheduling
Fixes an easily triggerable BUG() when setting process affinities.

Make sure to count the number of migratable tasks in the same place:
the root rt_rq. Otherwise the number doesn't make sense and we'll hit
the BUG in set_cpus_allowed_rt().

Also, make sure we only count tasks, not groups (this is probably
already taken care of by the fact that rt_se->nr_cpus_allowed will be 0
for groups, but be more explicit)

Tested-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Gregory Haskins <ghaskins@novell.com>
LKML-Reference: <1247067476.9777.57.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-10 10:43:29 +02:00
Yinghai Lu
eaa958402e cpumask: alloc zeroed cpumask for static cpumask_var_ts
These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already.  Avoid surprises when MAXSMP is enabled.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-09 22:30:27 +09:30
Ingo Molnar
5af8c4e0fa Merge commit 'v2.6.30-rc1' into sched/urgent
Merge reason: update to latest upstream to queue up fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08 17:26:00 +02:00
Rusty Russell
13b8bd0a57 sched_rt: don't allocate cpumask in fastpath
Impact: cleanup

As pointed out by Steven Rostedt.  Since the arg in question is
unused, we simply change cpupri_find() to accept NULL.

Reported-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200903251501.22664.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-01 13:24:51 +02:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Ingo Molnar
140573d33b Merge branches 'sched/rt' and 'sched/urgent' into sched/core 2009-02-08 20:12:46 +01:00
Rusty Russell
3d398703ef sched_rt: don't use first_cpu on cpumask created with cpumask_and
cpumask_and() only initializes nr_cpu_ids bits, so the (deprecated)
first_cpu() might find one of those uninitialized bits if nr_cpu_ids
is less than NR_CPUS (as it can be for CONFIG_CPUMASK_OFFSTACK).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-01 10:49:52 +01:00
Peter Zijlstra
ceacc2c1c8 sched: make plist a library facility
Ingo Molnar wrote:

> here's a new build failure with tip/sched/rt:
>
>   LD      .tmp_vmlinux1
> kernel/built-in.o: In function `set_curr_task_rt':
> sched.c:(.text+0x3675): undefined reference to `plist_del'
> kernel/built-in.o: In function `pick_next_task_rt':
> sched.c:(.text+0x37ce): undefined reference to `plist_del'
> kernel/built-in.o: In function `enqueue_pushable_task':
> sched.c:(.text+0x381c): undefined reference to `plist_del'

Eliminate the plist library kconfig and make it available
unconditionally.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 15:01:31 +01:00
Gregory Haskins
398a153b16 sched: fix build error in kernel/sched_rt.c when RT_GROUP_SCHED && !SMP
Ingo found a build error in the scheduler when RT_GROUP_SCHED was
enabled, but SMP was not.  This patch rearranges the code such
that it is a little more streamlined and compiles under all permutations
of SMP, UP and RT_GROUP_SCHED.  It was boot tested on my 4-way x86_64
and it still passes preempt-test.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2009-01-14 09:10:04 -05:00
Gregory Haskins
b07430ac37 sched: de CPP-ify the scheduler code
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2009-01-14 08:55:39 -05:00
Mike Travis
d38b223c86 cpumask: reduce stack usage in find_lowest_rq
Impact: reduce stack usage, cleanup

Use a cpumask_var_t in find_lowest_rq() and clean up other old
cpumask_t calls.

Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:22 +01:00
Ingo Molnar
0a6d4e1dc9 Merge branch 'sched/latest' of git://git.kernel.org/pub/scm/linux/kernel/git/ghaskins/linux-2.6-hacks into sched/rt 2009-01-11 04:58:49 +01:00
Mike Travis
6ca09dfc9f sched: put back some stack hog changes that were undone in kernel/sched.c
Impact: prevents panic from stack overflow on numa-capable machines.

Some of the "removal of stack hogs" changes in kernel/sched.c by using
node_to_cpumask_ptr were undone by the early cpumask API updates, and
causes a panic due to stack overflow.  This patch undoes those changes
by using cpumask_of_node() which returns a 'const struct cpumask *'.

In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further
reducing stack usage.  (Both of these updates removed 9 FIXME's!)

Also:
   Pick up some remaining changes from the old 'cpumask_t' functions to
   the new 'struct cpumask *' functions.

   Optimize memory traffic by allocating each percpu local_cpu_mask on the
   same node as the referring cpu.

Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 19:00:09 +01:00
Mike Travis
7eb1955336 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask
Conflicts:
	arch/x86/kernel/io_apic.c
	kernel/rcuclassic.c
	kernel/sched.c
	kernel/time/tick-sched.c

Signed-off-by: Mike Travis <travis@sgi.com>
[ mingo@elte.hu: backmerged typo fix for io_apic.c ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 18:53:31 +01:00
Gregory Haskins
1563513d34 RT: fix push_rt_task() to handle dequeue_pushable properly
A panic was discovered by Chirag Jog where a BUG_ON sanity check
in the new "pushable_task" logic would trigger a panic under
certain circumstances:

http://lkml.org/lkml/2008/9/25/189

Gilles Carry discovered that the root cause was attributed to the
pushable_tasks list getting corrupted in the push_rt_task logic.
This was the result of a dropped rq lock in double_lock_balance
allowing a task in the process of being pushed to potentially migrate
away, and thus corrupt the pushable_tasks() list.

I traced back the problem as introduced by the pushable_tasks patch
that went in recently.   There is a "retry" path in push_rt_task()
that actually had a compound conditional to decide whether to
retry or exit.  I missed the meaning behind the rationale for the
virtual "if(!task) goto out;" portion of the compound statement and
thus did not handle it properly.  The new pushable_tasks logic
actually creates three distinct conditions:

1) an untouched and unpushable task should be dequeued
2) a migrated task where more pushable tasks remain should be retried
3) a migrated task where no more pushable tasks exist should exit

The original logic mushed (1) and (3) together, resulting in the
system dequeuing a migrated task (against an unlocked foreign run-queue
nonetheless).

To fix this, we get rid of the notion of "paranoid" and we support the
three unique conditions properly.  The paranoid feature is no longer
relevant with the new pushable logic (since pushable naturally limits
the loop) anyway, so lets just remove it.

Reported-By: Chirag Jog <chirag@linux.vnet.ibm.com>
Found-by: Gilles Carry <gilles.carry@bull.net>
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:53 -05:00
Gregory Haskins
917b627d4d sched: create "pushable_tasks" list to limit pushing to one attempt
The RT scheduler employs a "push/pull" design to actively balance tasks
within the system (on a per disjoint cpuset basis).  When a task is
awoken, it is immediately determined if there are any lower priority
cpus which should be preempted.  This is opposed to the way normal
SCHED_OTHER tasks behave, which will wait for a periodic rebalancing
operation to occur before spreading out load.

When a particular RQ has more than 1 active RT task, it is said to
be in an "overloaded" state.  Once this occurs, the system enters
the active balancing mode, where it will try to push the task away,
or persuade a different cpu to pull it over.  The system will stay
in this state until the system falls back below the <= 1 queued RT
task per RQ.

However, the current implementation suffers from a limitation in the
push logic.  Once overloaded, all tasks (other than current) on the
RQ are analyzed on every push operation, even if it was previously
unpushable (due to affinity, etc).  Whats more, the operation stops
at the first task that is unpushable and will not look at items
lower in the queue.  This causes two problems:

1) We can have the same tasks analyzed over and over again during each
   push, which extends out the fast path in the scheduler for no
   gain.  Consider a RQ that has dozens of tasks that are bound to a
   core.  Each one of those tasks will be encountered and skipped
   for each push operation while they are queued.

2) There may be lower-priority tasks under the unpushable task that
   could have been successfully pushed, but will never be considered
   until either the unpushable task is cleared, or a pull operation
   succeeds.  The net result is a potential latency source for mid
   priority tasks.

This patch aims to rectify these two conditions by introducing a new
priority sorted list: "pushable_tasks".  A task is added to the list
each time a task is activated or preempted.  It is removed from the
list any time it is deactivated, made current, or fails to push.

This works because a task only needs to be attempted to push once.
After an initial failure to push, the other cpus will eventually try to
pull the task when the conditions are proper.  This also solves the
problem that we don't completely analyze all tasks due to encountering
an unpushable tasks.  Now every task will have a push attempted (when
appropriate).

This reduces latency both by shorting the critical section of the
rq->lock for certain workloads, and by making sure the algorithm
considers all eligible tasks in the system.

[ rostedt: added a couple more BUG_ONs ]

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
2008-12-29 09:39:53 -05:00
Gregory Haskins
967fc04671 sched: add sched_class->needs_post_schedule() member
We currently run class->post_schedule() outside of the rq->lock, which
means that we need to test for the need to post_schedule outside of
the lock to avoid a forced reacquistion.  This is currently not a problem
as we only look at rq->rt.overloaded.  However, we want to enhance this
going forward to look at more state to reduce the need to post_schedule to
a bare minimum set.  Therefore, we introduce a new member-func called
needs_post_schedule() which tests for the post_schedule condtion without
actually performing the work.  Therefore it is safe to call this
function before the rq->lock is released, because we are guaranteed not
to drop the lock at an intermediate point (such as what post_schedule()
may do).

We will use this later in the series

[ rostedt: removed paranoid BUG_ON ]

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:52 -05:00
Gregory Haskins
777c2f389e sched: only try to push a task on wakeup if it is migratable
There is no sense in wasting time trying to push a task away that
cannot move anywhere else.  We gain no benefit from trying to push
other tasks at this point, so if the task being woken up is non
migratable, just skip the whole operation.  This reduces overhead
in the wakeup path for certain tasks.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:50 -05:00
Gregory Haskins
74ab8e4f64 sched: use highest_prio.next to optimize pull operations
We currently take the rq->lock for every cpu in an overload state during
pull_rt_tasks().  However, we now have enough information via the
highest_prio.[curr|next] fields to determine if there is any tasks of
interest to warrant the overhead of the rq->lock, before we actually take
it.  So we use this information to reduce lock contention during the
pull for the case where the source-rq doesnt have tasks that preempt
the current task.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:50 -05:00
Gregory Haskins
a8728944ef sched: use highest_prio.curr for pull threshold
highest_prio.curr is actually a more accurate way to keep track of
the pull_rt_task() threshold since it is always up to date, even
if the "next" task migrates during double_lock.  Therefore, stop
looking at the "next" task object and simply use the highest_prio.curr.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:49 -05:00
Gregory Haskins
e864c499d9 sched: track the next-highest priority on each runqueue
We will use this later in the series to reduce the amount of rq-lock
contention during a pull operation

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:49 -05:00
Gregory Haskins
4d9842776a sched: cleanup inc/dec_rt_tasks
Move some common definitions up to the function prologe to simplify the
body logic.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29 09:39:49 -05:00
Ingo Molnar
4e202284e6 Merge branch 'sched/urgent'; commit 'v2.6.28' into sched/core 2008-12-25 13:42:23 +01:00
Bharata B Rao
80f40ee4a0 sched: use RCU variant of list traversal in for_each_leaf_rt_rq()
Impact: fix potential of rare crash

for_each_leaf_rt_rq() walks an RCU protected list (rq->leaf_rt_rq_list),
but doesn't use list_for_each_entry_rcu(). Fix this.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 21:39:14 +01:00
Ingo Molnar
45ab6b0c76 Merge branch 'sched/core' into cpus4096
Conflicts:
	include/linux/ftrace.h
	kernel/sched.c
2008-12-12 13:48:57 +01:00
Alexey Dobriyan
70574a996f sched: move double_unlock_balance() higher
Move double_lock_balance()/double_unlock_balance() higher to fix the following
with gcc-3.4.6:

   CC      kernel/sched.o
 In file included from kernel/sched.c:1605:
 kernel/sched_rt.c: In function `find_lock_lowest_rq':
 kernel/sched_rt.c:914: sorry, unimplemented: inlining failed in call to 'double_unlock_balance': function body not available
 kernel/sched_rt.c:1077: sorry, unimplemented: called from here
 make[2]: *** [kernel/sched.o] Error 1

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-28 20:11:15 +01:00
Rusty Russell
3d8cbdf865 sched: convert local_cpu_mask to cpumask_var_t, fix
Impact: build fix for !CONFIG_SMP

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 07:58:28 +01:00
Rusty Russell
96f874e264 sched: convert remaining old-style cpumask operators
Impact: Trivial API conversion

  NR_CPUS -> nr_cpu_ids
  cpumask_t -> struct cpumask
  sizeof(cpumask_t) -> cpumask_size()
  cpumask_a = cpumask_b -> cpumask_copy(&cpumask_a, &cpumask_b)

  cpu_set() -> cpumask_set_cpu()
  first_cpu() -> cpumask_first()
  cpumask_of_cpu() -> cpumask_of()
  cpus_* -> cpumask_*

There are some FIXMEs where we all archs to complete infrastructure
(patches have been sent):

  cpu_coregroup_map -> cpu_coregroup_mask
  node_to_cpumask* -> cpumask_of_node

There is also one FIXME where we pass an array of cpumasks to
partition_sched_domains(): this implies knowing the definition of
'struct cpumask' and the size of a cpumask.  This will be fixed in a
future patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:52:42 +01:00
Rusty Russell
0e3900e6d3 sched: convert local_cpu_mask to cpumask_var_t.
Impact: (future) size reduction for large NR_CPUS.

Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS.  cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:52:35 +01:00
Rusty Russell
24600ce89a sched: convert check_preempt_equal_prio to cpumask_var_t.
Impact: stack reduction for large NR_CPUS

Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
stack space.

We simply return if the allocation fails: since we don't use it we
could just pass NULL to cpupri_find and have it handle that.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:52:28 +01:00
Rusty Russell
c6c4927b22 sched: convert struct root_domain to cpumask_var_t.
Impact: (future) size reduction for large NR_CPUS.

Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS.  cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.

def_root_domain is static, and so its masks are initialized with
alloc_bootmem_cpumask_var.  After that, alloc_cpumask_var is used.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:51:18 +01:00
Rusty Russell
758b2cdc6f sched: wrap sched_group and sched_domain cpumask accesses.
Impact: trivial wrap of member accesses

This eases the transition in the next patch.

We also get rid of a temporary cpumask in find_idlest_cpu() thanks to
for_each_cpu_and, and sched_balance_self() due to getting weight before
setting sd to NULL.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-24 17:50:45 +01:00
Sripathi Kodi
cf7f8690e8 sched, lockdep: inline double_unlock_balance()
We have a test case which measures the variation in the amount of time
needed to perform a fixed amount of work on the preempt_rt kernel. We
started seeing deterioration in it's performance recently. The test
should never take more than 10 microseconds, but we started 5-10%
failure rate.

Using elimination method, we traced the problem to commit
1b12bbc747 (lockdep: re-annotate
scheduler runqueues).

When LOCKDEP is disabled, this patch only adds an additional function
call to double_unlock_balance(). Hence I inlined double_unlock_balance()
and the problem went away. Here is a patch to make this change.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 22:12:09 +01:00
Dimitri Sivanich
e113a745f6 sched/rt: small optimization to update_curr_rt()
Impact: micro-optimization to SCHED_FIFO/RR scheduling

A very minor improvement, but might it be better to check sched_rt_runtime(rt_rq)
before taking the rt_runtime_lock?

Peter Zijlstra observes:

> Yes, I think its ok to do so.
>
> Like pointed out in the other thread, there are two races:
>
>  - sched_rt_runtime() going to RUNTIME_INF, and that will be handled
>    properly by sched_rt_runtime_exceeded()
>
>  - sched_rt_runtime() going to !RUNTIME_INF, and here we can miss an
>    accounting cycle, but I don't think that is something to worry too
>    much about.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

--

 kernel/sched_rt.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
2008-11-03 11:29:00 +01:00
Ingo Molnar
8c82a17e9c Merge commit 'v2.6.28-rc1' into sched/urgent 2008-10-24 12:48:46 +02:00
Li Zefan
4ce72a2c06 sched: add CONFIG_SMP consistency
a patch from Henrik Austad did this:

>> Do not declare select_task_rq as part of sched_class when CONFIG_SMP is
>> not set.

Peter observed:

> While a proper cleanup, could you do it by re-arranging the methods so
> as to not create an additional ifdef?

Do not declare select_task_rq and some other methods as part of sched_class
when CONFIG_SMP is not set.

Also gather those methods to avoid CONFIG_SMP mess.

Idea-by: Henrik Austad <henrik.austad@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 10:01:52 +02:00
Thomas Gleixner
c465a76af6 Merge branches 'timers/clocksource', 'timers/hrtimers', 'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/debug' into v28-timers-for-linus 2008-10-20 13:14:06 +02:00
Dario Faggioli
f6121f4f87 sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq
While working on the new version of the code for SCHED_SPORADIC I
noticed something strange in the present throttling mechanism. More
specifically in the throttling timer handler in sched_rt.c
(do_sched_rt_period_timer()) and in rt_rq_enqueue().

The problem is that, when unthrottling a runqueue, rt_rq_enqueue() only
asks for rescheduling if the runqueue has a sched_entity associated to
it (i.e., rt_rq->rt_se != NULL).
Now, if the runqueue is the root rq (which has a rt_se = NULL)
rescheduling does not take place, and it is delayed to some undefined
instant in the future.

This imply some random bandwidth usage by the RT tasks under throttling.
For instance, setting rt_runtime_us/rt_period_us = 950ms/1000ms an RT
task will get less than 95%. In our tests we got something varying
between 70% to 95%.
Using smaller time values, e.g., 95ms/100ms, things are even worse, and
I can see values also going down to 20-25%!!

The tests we performed are simply running 'yes' as a SCHED_FIFO task,
and checking the CPU usage with top, but we can investigate thoroughly
if you think it is needed.

Things go much better, for us, with the attached patch... Don't know if
it is the best approach, but it solved the issue for us.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 14:31:54 +02:00
Peter Zijlstra
78333cdd0e sched: add some comments to the bandwidth code
Hopefully clarify some of this code a little.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23 16:23:16 +02:00
Ingo Molnar
63e5c39859 Merge branches 'sched/urgent' and 'sched/rt' into sched/devel 2008-09-23 16:23:05 +02:00