bch2_bset_fix_lookup_table is too complicated to be easily understood,
the comment "l now > where" there is also incorrect when where ==
t->end_offset. This patch therefore refactor the function, the idea is
that when where >= rw_aux_tree(b, t)[t->size - 1].offset, we don't need
to adjust the rw aux tree.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
After reducing the search range when building the aux tree, the prev array
stuff is no longer useful, so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the search key's mantissa is larger than the node i's, we know that
the search key is larger than the first key of the cacheline corresponding
to node i, so that when we are calculating the mantissa of right side
nodes of node i, the left side of the search range can be the first key
of node i. Once the search range is minimized, the mantissa we are
calculating can have more useful bits, thus reduce the slow path
comparison. Besides, we can now remove all the prev array stuff.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch replaces open-coded extra computation to eytzinger1_extra.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This logic is no longer useful since commit
3ce8b463e3 ("bcachefs: kill bset_tree->max_key"), so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The idx parameter of bkey_mantissa_bits_dropped is unused, remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The idx parameter of bkey_mantissa became unused since commit
b904a79918 ("bcachefs: Go back to 16 bit mantissa bkey floats"),
so remove it.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When dropping keys now outside a now because we're changing the node
min/max, we need to redo the node's accounting as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's no longer legal to use a zero size array as a flexible array
member - this causes UBSAN to complain.
This patch switches our zero size arrays to normal flexible array
members when possible, and inserts casts in other places (e.g. where we
use the zero size array as a marker partway through an array).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- endianness fixes
- mark some things static
- fix a few __percpu annotations
- fix silent enum conversions
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Small performance optimization; an open coded loop is better than rep ;
movsq for small copies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rust bindgen doesn't cope well with anonymous structs and unions. This
patch drops the fancy anonymous structs & unions in bkey_i that let us
use the same helpers for bkey_i and bkey_packed; since bkey_packed is an
internal type that's never exposed to outside code, it's only a minor
inconvenienc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The implementation of prefetch_four_cachelines should use ifdef
CONFIG_X86_64 to conditionally compile x86_64 asm.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fs/bcachefs/bset.c edited prefetch macro to add clang support
fs/bcachefs/btree_iter.c bugfix: initialize iter->real_pos in bch2_btree_iter_init for later use
fs/bcachefs/io.c bugfix: eliminated undefined behavior (negative bitshift)
fs/bcachefs/buckets.c bugfix: invert sign to handle 64bit abs()
Signed-off-by: Brett Holman <bpholman5@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we now ensure a btree node's max key fits in its packed format,
this isn't needed for the reasons it used to be - and, it was being used
inconsistently.
Also reorder struct btree a bit for performance, and kill some dead
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With snapshots, we're going to need to differentiate between comparisons
that should and shouldn't include the snapshot field. bpos_cmp is now
the comparison function that does include the snapshot field, used by
core btree code.
Upper level filesystem code generally does _not_ want to compare against
the snapshot field - that code wants keys to compare as equal even when
one of them is in an ancestor snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we now make sure to always generate packed bkey formats that can
pack the min_key of a btree node, this path should actually never
happen.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We weren't packing the min/max keys, which was a major oversight and
completely disabled generating bkey_floats for adjacent nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Bkey noops were introduced to deal with trimming inline data extents in
place in the btree: if the u64s field of a bkey was 0, that u64 was a
noop and we'd start looking for the next bkey immediately after it.
But extent handling has been lifted above the btree - we no longer
modify existing extents in place in the btree, and the compatibilty code
for old style extent btree nodes is gone, so we can completely drop this
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
KEY_TYPE_discard used to be used for extent whiteouts, but when handling
over overlapping extents was lifted above the core btree code it became
unused. This patch updates various code to reflect that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is a fast path - also, lift out the checks/init for min/max key.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
perhaps a bit silly, but some debug assertions we want to add need const
propagated a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's not used much anymore, the module paramter interface is better.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More aggressively checking iterator invariants, and fixing the resulting
bugs. Also greatly simplifying iter_next() and iter_next_slot() - they
were hyper optimized before, but the optimizations were getting too
brittle.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's used in the write path when the bset isn't in the btree node
buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The insert path had an optimization to short circuit lookup
table/iterator fixups when overwriting an existing key with the same
size value - but it was incorrect when other key fields
(size/version) were changing. This is important for the upcoming rework
to have extent updates use the same insert path as regular keys.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Rework some of the helper comparison functions for consistency
- Currently trying to refactor all the logic that's different for
extents in the btree iterator code. The main difference is that for non
extents we search for a key greater than or equal to the search key,
while for extents we search for a key strictly greater than the search
key (iter->pos).
So that logic is now handled by btree_iter_search_key(), which computes
the real search key based on iter->pos and whether or not we're
searching for a key >= or > iter->pos.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were calling __btree_node_key_to_offset() on a key that wasn't in the
btree node.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For upcoming inline data extents, we're going to need to be able to
shorten the value of existing bkeys in the btree - and to make that work
we're going to be able to need to pad out the space the value previously
took up with something.
This patch changes the various code that iterates over bkeys to handle
k->u64s == 0 as meaning "skip the next 8 bytes".
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
