Commit graph

190 commits

Author SHA1 Message Date
Paul Mackerras
dcb571be20 Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25 2008-01-24 15:29:14 +11:00
Jon Loeliger
96f39c1718 [POWERPC] Add initial storcenter config file.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:54:39 -06:00
Scott Wood
5f44668c88 [POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:53 -06:00
Scott Wood
0dde1a1df9 [POWERPC] 82xx: Embedded Planet EP8248E support
This board is also resold by Freescale under the names
"QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:43 -06:00
Scott Wood
b09c16440e [POWERPC] 8xx: Analogue & Micro Adder875 board support.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:40 -06:00
Timur Tabi
c7d24a2dd0 [POWERPC] Update MPC8610 HPCD to support audio drivers
Update the MPC8610 HPCD files to support the audio driver.  Update
booting-without-of.txt with information on the SSI device.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:29 -06:00
Anton Vorontsov
9b6d19dd1d [POWERPC] MPC8349E-mITX: introduce localbus and pata nodes
This patch adds localbus and pata nodes to use CF IDE interface
on MPC8349E-mITX boards.

Patch also adds code to probe localbus.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:33:08 -06:00
Grant Likely
0a0a5af30b [POWERPC] mpc5200: merge defconfigs for all mpc5200 boards
There is no reason to have separate defconfigs for each mpc5200 board.
Instead, here is a common defconfig that can be used for all supported
platforms.

Merging the defconfigs means there are fewer configuration to test when
compile testing all of arch/powerpc and should make support easier.

Supported boards:
	Lite5200(b), Efika, TQM5200, CM5200, MotionPro

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-21 11:22:22 -07:00
Paul Mackerras
52920df4aa Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25 2008-01-17 16:17:58 +11:00
Olof Johansson
9cd55be4d2 [POWERPC] pasemi: Move electra-ide to pata_of_platform
Move electra-ide glue over to the new pata_of_platform framework, and
add the quirks needed to that driver.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-15 10:26:45 -06:00
Hollis Blanchard
5834584e4e [POWERPC] 4xx: enable built-in networking for Sequoia defconfig
Enable EMAC driver for Sequoia (and while we're in there, disable
Macintosh drivers for Sequoia and Bamboo).

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08 07:43:57 -06:00
Stefan Roese
7e52b48216 [POWERPC] 4xx: Add EMAC support to Kilauea defconfig
Somehow the EMAC support was dropped (or never really added) to the
Kilauea defconfig file. This patch finally adds EMAC support.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-04 12:52:52 -06:00
Paul Mackerras
4f43143f9f Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi 2007-12-31 13:54:13 +11:00
Olof Johansson
90c26375b4 [POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfig
Enable MSI now that we have an implementation, and enable CONFIG_MD and
the raid options by default as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-28 11:02:34 -06:00
Josh Boyer
d2d8cfc657 [POWERPC] 4xx: Update defconfigs
Update the 4xx board defconfigs

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-24 19:46:29 -06:00
Josh Boyer
9901162370 [POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigs
Enable PCI support for these eval boards among other things.  Also selects
PCI for Rainier in the Kconfig file.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:41:54 -06:00
Stefan Roese
9a2b77b0da [POWERPC] 4xx: Makalu defconfig
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:37:09 -06:00
Valentine Barshak
309ae1a363 [POWERPC] 4xx: 440GRx Rainier default config
PowerPC 440GRx Rainier default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:23:26 -06:00
Benjamin Herrenschmidt
3de9c9cd22 [POWERPC] 4xx: Base support for 440SPe "Katmai" eval board
This adds base support for the Katmai board, including PCI-X and
PCI-Express (but no RTC, nvram, etc... yet).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:14:57 -06:00
Hugh Blemings
6bbc547629 [POWERPC] 4xx: Base support for 440GX Taishan eval board
This patch adds base support for the AMCC Taishan 440GX evaluation
board.

Signed-off-by: Hugh Blemings <hugh@blemings.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:33 -06:00
Benjamin Herrenschmidt
619740384c [POWERPC] 4xx: EP405 boards support for arch/powerpc
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD
comes from a device-tree property, PCI is working to the point where
I can see the video card, USB device, and south bridge.

This should work with both EP405 and EP405PC.

I've not totally figured out how IRQs are wired on this hardware
though, thus at this stage, expect only USB interrupts working,
pretty much the same as what arch/ppc did.

Also, the flash, nvram, rtc and temp control still have to be wired.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:14 -06:00
Paul Mackerras
c2a7dcad9f Merge branch 'linux-2.6' 2007-12-21 22:21:08 +11:00
Stephen Rothwell
1ce890e036 [POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfig
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Paul Mackerras
280bb6b1f7 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2007-12-14 16:46:50 +11:00
Michael Ellerman
eb8dc843fc [POWERPC] Make PS3_SYS_MANAGER default y, not m
Currently it's impossible to build a ps3_defconfig which will reboot
without modules installed. This makes it all too easy to find yourself
with a PS3 that won't reboot.

This is because the system manager driver, which provides the reboot
mechanism, is only selectable if PS3_ADVANCED is set, else it defaults
to m. In ps3_defconfig PS3_ADVANCED is not set, therefore the system
manager is built as a module.

It would be desirable IMHO for the defconfig to produce a kernel that
boots and reboots, without needing modules to be installed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-14 16:45:00 +11:00
Scott Wood
e8b5f43f7b [POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC
This was recently made configurable, and needs to be set for these boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-13 22:44:49 -06:00
Li Yang
41bad27ff7 [POWERPC] 83xx: Add MPC837x MDS default kernel configuration
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 13:57:18 -06:00
Ishizaki Kou
24f1f17579 [POWERPC] Update celleb_defconfig to add support for native CBE
Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:41:25 +11:00
Paul Mackerras
43af66e135 [POWERPC] Update defconfigs
This updates all the defconfigs in arch/powerpc/configs except iseries
and ps3, which were updated by the preceding commits.

This mostly takes the defaults, except that I turned on tickless idle
and high-resolution timers for everything, and turned off instrumentation
support and "Fair group CPU scheduler" for the smaller/embedded platforms.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:54:02 +11:00
Geoff Levand
b3330def90 [POWERPC] PS3: Update ps3_defconfig
Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:09:00 +11:00
Stephen Rothwell
d4a76d2bdf [POWERPC] Update iseries_defconfig
The notable changes here are the enabling of NO_HZ and HIGH_RES_TIMERS.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 16:09:00 +11:00
Grant Likely
ad639b9f2c [POWERPC] 83xx: Update mpc8349emitx(gp) defconfig for USB
USB support for the 8349itx got added a while back; but the defconfig
never got updated.  This patch adds the appropriate USB config options
to the defconfigs

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Scott Wood <scottwood@freescale.com>
CC: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Anton Vorontsov
04ce7a9767 [POWERPC] 83xx: Update mpc832x_rdb_defconfig to enable MMC-over-SPI
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Kim Phillips
27f49807d7 [POWERPC] 8xxx: MDS board RTC fixes
Now the rtc class ds1374 driver has been added, remove the old rtc
driver hookup code, add rtc node to device trees, and turn on the
new driver in the defconfigs.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20 15:39:54 -06:00
Olof Johansson
7e22fa4a1d [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options
Refresh ppc64_defconfig, add PPC_PASEMI and various options that the
common boards there need:

* Chip drivers (iommu, ethernet, IDE, CF, EDAC, MDIO/PHY)
* PCMCIA
* PATA_PCMCIA
* RTC_CLASS
* SATA_MV
* SATA_SIL24
* IP_PNP + NFS_ROOT for diskless booting

+ possibly some other things I might have missed to list

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Olof Johansson
0c83ddfeb4 [POWERPC] pasemi: Update defconfig
Update pasemi_defconfig.  Add a few missing options for default devices
on electra boards, enable tickless and hrtimers, etc, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:33 +11:00
Paul Mackerras
786d3693f4 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2007-10-23 22:20:51 +10:00
Josh Boyer
739253765e [POWERPC] 4xx: Enable EMAC on Bamboo board
Fix some device tree omissions that prevented the new EMAC driver from
setting up ethernet on the Bamboo board correctly and update the Bamboo
defconfig.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:35 -05:00
Josh Boyer
b3af7a55da [POWERPC] 4xx: Enable EMAC for PPC405 Walnut board
This patch enables the ibm_newemac driver for the Walnut board.  It fixes the
device tree for the walnut board to order the MAL interrupts correctly and
adds the local-mac-address property to the EMAC node.  The bootwrapper is also
updated to extract the MAC address from the OpenBIOS offset where it is stored.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:33 -05:00
Josh Boyer
16fdad334c [POWERPC] 4xx: Enable EMAC on the PPC 440GP Ebony board
Update the Ebony defconfig to enable the ibm_newemac driver.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:29 -05:00
Paul Jackson
c2e2c7fa1c task cgroups: enable cgroups by default in some configs
In pre-cgroup cpusets, a few config files enabled cpusets by default.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:36 -07:00
Andres Salomon
8f4ce8c32f serial: turn serial console suspend a boot rather than compile time option
Currently, there's a CONFIG_DISABLE_CONSOLE_SUSPEND that allows one to stop
the serial console from being suspended when the rest of the machine goes
to sleep.  This is incredibly useful for debugging power management-related
things; however, having it as a compile-time option has proved to be
incredibly inconvenient for us (OLPC).  There are plenty of times that we
want serial console to not suspend, but for the most part we'd like serial
console to be suspended.

This drops CONFIG_DISABLE_CONSOLE_SUSPEND, and replaces it with a kernel
boot parameter (no_console_suspend).  By default, the serial console will
be suspended along with the rest of the system; by passing
'no_console_suspend' to the kernel during boot, serial console will remain
alive during suspend.

For now, this is pretty serial console specific; further fixes could be
applied to make this work for things like netconsole.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:19 -07:00
Anton Blanchard
8129535b6b [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs
Enable NO_HZ and high res timers for the ppc64 and pseries defconfigs.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:09 +10:00
Anton Blanchard
309a109255 [POWERPC] Enable SLUB in *_defconfig
When checking out the new NO_HZ support in powerpc, I noticed we never
slept for more than 2 seconds.  It turns out SLAB has a 2 second per cpu
timer that causes this.

After switching to SLUB I see some nice 4 second sleeps which is the
limit on this POWER6 box (the decrementer ticks at 512MHz):

slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 4.19 sec
slept 3.96 sec
slept 3.80 sec
slept 2.99 sec

Since SLUB is now the default and some powerpc defconfigs already enable
it, lets enable SLUB across the board for consistency.  While doing this
I also noticed that the maple defconfig has SLAB debugging enabled which
is sure to make your box nice and slow.  Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Paul Mackerras
8087ebd5a1 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24 2007-10-12 09:06:32 +10:00
Stefan Roese
ad656887e2 [POWERPC] 4xx: Kilauea defconfig file
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-11 15:11:08 -05:00
Kumar Gala
f5d7d13cd9 [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-11 09:17:22 -05:00
Xianghua Xiao
0e65bfe34c [POWERPC] Add initial MPC8610 HPCD Platform files.
Add basic board support for the MPC8610 HPCD.  This does
not include any support the SoC Display or Audio controllers.

Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Jon Loelier <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:31 -05:00
Scott Wood
3611f2ad42 [POWERPC] mpc82xx: Add pq2fads board support.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:47 -05:00
Scott Wood
e00c5498a2 [POWERPC] mpc82xx: Update mpc8272ads, and factor out PCI and reset.
1. PCI and reset are factored out into pq2.c.  I renamed them from m82xx
to pq2 because they won't work on the Integrated Host Processor line of
82xx chips (i.e. 8240, 8245, and such).

2. The PCI PIC, which is nominally board-specific, is used on multiple
boards, and thus is used into pq2ads-pci-pic.c.

3. The new CPM binding is used.

4. General cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:44 -05:00