chao bi 319fb0d219 serial: ifx6x60: different SPI word width configure requires different swap process ... SPI protocol driver only provide one function (swap_buf()) to swap SPI data into big endian format, which is only available when SPI controller's word width is 16 bits. But word width could be configured as 8/16/32 bits, different word width configure should be mapped to different swap methods.This patch is to make SPI protocol driver choose the right swap function corresponding to SPI word width configuration. cc: liu chuansheng <chuansheng.liu@intel.com> cc: Chen Jun <jun.d.chen@intel.com> Signed-off-by: channing <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-10-25 11:29:58 -07:00
..
8250	x86: ce4100: allow second UART usage	2012-10-24 11:34:51 -07:00
cpm_uart	Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate	2012-09-26 13:39:39 -07:00
jsm	TTY merge for 3.7-rc1	2012-10-01 12:26:52 -07:00
21285.c
68328serial.c	TTY: use tty_port_link_device	2012-08-13 16:50:19 -07:00
altera_jtaguart.c
altera_uart.c	tty: serial: altera_uart: Use platform_{get,set}_drvdata	2012-09-05 12:33:39 -07:00
amba-pl010.c	drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare	2012-09-05 12:33:39 -07:00
amba-pl011.c	serial/amba-pl011: use devm_* managed resources	2012-10-25 11:29:44 -07:00
apbuart.c
apbuart.h
ar933x_uart.c
atmel_serial.c
bcm63xx_uart.c
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	tty: move the termios object into the tty	2012-07-16 13:00:41 -07:00
clps711x.c	serial: clps711x: Cleanup driver	2012-10-24 11:39:48 -07:00
crisv10.c	TTY: use tty_port_link_device	2012-08-13 16:50:19 -07:00
crisv10.h
dz.c
dz.h
efm32-uart.c
icom.c
icom.h
ifx6x60.c	serial: ifx6x60: different SPI word width configure requires different swap process	2012-10-25 11:29:58 -07:00
ifx6x60.h	serial: ifx6x60: different SPI word width configure requires different swap process	2012-10-25 11:29:58 -07:00
imx.c	ARM: soc: multiplatform enablement	2012-10-01 19:11:38 -07:00
ioc3_serial.c	TTY: serial: move the dereference below the NULL test	2012-09-10 16:33:02 -07:00
ioc4_serial.c	TTY: serial: move the dereference below the NULL test	2012-09-10 16:33:02 -07:00
ip22zilog.c
ip22zilog.h
Kconfig	serial: sccnxp: Allows the driver to be compiled as a module	2012-10-05 09:26:02 -07:00
kgdb_nmi.c	tty/serial: Add kgdb_nmi driver	2012-09-26 13:52:36 -07:00
kgdboc.c	KGDB/KDB fixes and cleanups	2012-10-13 11:16:58 +09:00
lantiq.c	SERIAL: MIPS: lantiq: implement OF support	2012-05-21 14:31:54 +01:00
lpc32xx_hs.c	serial: Add driver for LPC32xx High Speed UARTs	2012-06-12 15:48:01 -07:00
m32r_sio.c	m32r_sio: remove dependency on struct serial_uart_config	2012-09-05 13:15:07 -07:00
m32r_sio.h
m32r_sio_reg.h
Makefile	tty/serial: Add kgdb_nmi driver	2012-09-26 13:52:36 -07:00
max310x.c	tty: serial: max310x: Remove explicit use of devm_kfree	2012-09-05 12:33:40 -07:00
max3100.c	tty: serial: max3100: Fix error case	2012-09-17 04:45:29 -07:00
mcf.c
mfd.c
mpc52xx_uart.c	ARM: soc: non-critical bug fixes	2012-10-01 18:02:07 -07:00
mpsc.c
mrst_max3110.c
mrst_max3110.h
msm_serial.c	msm_serial: fix clock rate on DMA-based uarts	2012-09-10 16:33:36 -07:00
msm_serial.h
msm_serial_hs.c
msm_smd_tty.c	TTY: use tty_port_register_device	2012-08-13 16:50:19 -07:00
mux.c
mxs-auart.c	serial: mxs-auart: put the device in the error path	2012-09-11 12:21:33 -07:00
netx-serial.c
nwpserial.c
of_serial.c	serial/of-serial: Add LPC3220 standard UART compatible string	2012-07-26 13:37:02 -07:00
omap-serial.c	serial: omap: Remove the hardcode serial_omap_console_ports array.	2012-10-25 11:29:11 -07:00
pch_uart.c	pch_uart: check kzalloc result in dma_handle_tx()	2012-08-16 12:10:16 -07:00
pmac_zilog.c	pmac_zilog,kdb: Fix console poll hook to return instead of loop	2012-08-16 12:20:20 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	tty: serial: KGDB support for PXA	2012-10-24 11:38:28 -07:00
sa1100.c
samsung.c	serial: samsung: use clk_prepare_enable and clk_disable_unprepare	2012-10-24 11:29:30 -07:00
samsung.h
sb1250-duart.c	SERIAL: MIPS Swarm sb1250-duart.c driver needs module.h	2012-05-15 17:48:50 +02:00
sc26xx.c	serial: Add note about migration to driver SCCNXP	2012-09-05 13:24:40 -07:00
sccnxp.c	tty: serial: sccnxp: Fix bug with unterminated platform_id list	2012-10-05 09:34:37 -07:00
serial_core.c	tty/serial/core: Introduce poll_init callback	2012-09-26 13:47:02 -07:00
serial_ks8695.c	serial: ks8695: use __iomem pointers for MMIO	2012-09-19 15:37:13 +02:00
serial_txx9.c	serial: fix serial_txx9.c build warning/typo	2012-06-12 15:41:18 -07:00
sh-sci.c	sh: Fix up more fallout from pointless ARM __iomem churn.	2012-10-15 14:08:48 +09:00
sh-sci.h
sirfsoc_uart.c	drivers/tty/serial/sirfsoc_uart.c: drop frees of devm_ alloc'd data	2012-09-05 12:41:57 -07:00
sirfsoc_uart.h
sn_console.c
suncore.c
sunhv.c
sunsab.c
sunsab.h
sunsu.c	serial: diminish usage of struct serial_uart_config	2012-09-05 13:15:07 -07:00
sunzilog.c
sunzilog.h
timbuart.c
timbuart.h
uartlite.c	uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op	2012-07-19 10:39:42 -04:00
ucc_uart.c
vr41xx_siu.c
vt8500_serial.c	serial: vt8500: fix possible memory leak in vt8500_serial_probe()	2012-10-24 11:34:51 -07:00
xilinx_uartps.c
zs.c	SERIAL: MIPS DECstation zs.c driver needs module.h	2012-05-15 17:48:50 +02:00
zs.h