kernel-hacking-2024-linux-s.../drivers/usb
David Brownell 390a8c345e [PATCH] remove usb_suspend_device() parameter
This patch removes the extra usb_suspend_device() parameter.  The original
reason to pass that parameter was so that this routine could suspend any
active children.  A previous patch removed that functionality ... leaving
no reason to pass the parameter.  A close analogy is pci_set_power_state,
which doesn't need a pm_message_t either.

On the internal code path that comes through the driver model, the parameter
is now used to distinguish cases where USB devices need to "freeze" but not
suspend.   It also checks for an error case that's accessible through sysfs:
attempting to suspend a device before its interfaces (or for hubs, ports).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/usb/core/hub.c         |   34 +++++++++++++++++++++-------------
 drivers/usb/core/usb.c         |   23 +++++++++++++++++++++--
 drivers/usb/host/ehci-hcd.c    |    2 +-
 drivers/usb/host/isp116x-hcd.c |    2 +-
 drivers/usb/host/ohci-pci.c    |    2 +-
 include/linux/usb.h            |    2 +-
 6 files changed, 46 insertions(+), 19 deletions(-)
2005-10-28 16:47:38 -07:00
..
atm [PATCH] USB: URB_ASYNC_UNLINK flag removed from the kernel 2005-09-08 16:23:04 -07:00
class [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
core [PATCH] remove usb_suspend_device() parameter 2005-10-28 16:47:38 -07:00
gadget Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
host [PATCH] remove usb_suspend_device() parameter 2005-10-28 16:47:38 -07:00
image [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
input [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
media [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00
misc [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
mon [PATCH] USB: Usbmon setup DMA patch 2005-09-12 12:23:54 -07:00
net [PATCH] usb_interface power state 2005-10-28 16:47:38 -07:00
serial [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras 2005-10-28 16:47:37 -07:00
storage [PATCH] Input: convert onetouch to dynamic input_dev allocation 2005-10-28 09:52:53 -07:00
Kconfig [PATCH] USB: add S3C24XX USB Host driver support 2005-07-29 13:12:53 -07:00
Makefile [PATCH] USB: move handoff code 2005-10-28 16:47:38 -07:00
README
usb-skeleton.c [PATCH] devfs: Remove the mode field from usb_class_driver as it's no longer needed 2005-10-28 16:47:37 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.