kernel-hacking-2024-linux-s.../arch/x86/kernel/smp.c
Seiji Aguchi cf910e83ae x86, trace: Add irq vector tracepoints
[Purpose of this patch]

As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.

http://www.spinics.net/lists/mm-commits/msg85707.html

<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled.  They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.

There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers.  Tracing such events gives
us the information about IRQ interaction with other system events.

The trace also tells where the system is spending its time.  We want to
know which cores are handling interrupts and how they are affecting other
processes in the system.  Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>

On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.

I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.

[Patch Description]

Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.

So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
   - local_timer_vector
   - reschedule_vector
   - call_function_vector
   - call_function_single_vector
   - irq_work_entry_vector
   - error_apic_vector
   - thermal_apic_vector
   - threshold_apic_vector
   - spurious_apic_vector
   - x86_platform_ipi_vector

Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
 - Create trace irq handlers with entering_irq()/exiting_irq().
 - Create a new IDT, trace_idt_table, at boot time by adding a logic to
   _set_gate(). It is just a copy of original idt table.
 - Register the new handlers for tracpoints to the new IDT by introducing
   macros to alloc_intr_gate() called at registering time of irq_vector handlers.
 - Add checking, whether irq vector tracing is on/off, into load_current_idt().
   This has to be done below debug checking for these reasons.
   - Switching to debug IDT may be kicked while tracing is enabled.
   - On the other hands, switching to trace IDT is kicked only when debugging
     is disabled.

In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:25:34 -07:00

353 lines
9.5 KiB
C

/*
* Intel SMP support routines.
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
* (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com>
* (c) 2002,2003 Andi Kleen, SuSE Labs.
*
* i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
*
* This code is released under the GNU General Public License version 2 or
* later.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/export.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/gfp.h>
#include <asm/mtrr.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/apic.h>
#include <asm/nmi.h>
#include <asm/trace/irq_vectors.h>
/*
* Some notes on x86 processor bugs affecting SMP operation:
*
* Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
* The Linux implications for SMP are handled as follows:
*
* Pentium III / [Xeon]
* None of the E1AP-E3AP errata are visible to the user.
*
* E1AP. see PII A1AP
* E2AP. see PII A2AP
* E3AP. see PII A3AP
*
* Pentium II / [Xeon]
* None of the A1AP-A3AP errata are visible to the user.
*
* A1AP. see PPro 1AP
* A2AP. see PPro 2AP
* A3AP. see PPro 7AP
*
* Pentium Pro
* None of 1AP-9AP errata are visible to the normal user,
* except occasional delivery of 'spurious interrupt' as trap #15.
* This is very rare and a non-problem.
*
* 1AP. Linux maps APIC as non-cacheable
* 2AP. worked around in hardware
* 3AP. fixed in C0 and above steppings microcode update.
* Linux does not use excessive STARTUP_IPIs.
* 4AP. worked around in hardware
* 5AP. symmetric IO mode (normal Linux operation) not affected.
* 'noapic' mode has vector 0xf filled out properly.
* 6AP. 'noapic' mode might be affected - fixed in later steppings
* 7AP. We do not assume writes to the LVT deassering IRQs
* 8AP. We do not enable low power mode (deep sleep) during MP bootup
* 9AP. We do not use mixed mode
*
* Pentium
* There is a marginal case where REP MOVS on 100MHz SMP
* machines with B stepping processors can fail. XXX should provide
* an L1cache=Writethrough or L1cache=off option.
*
* B stepping CPUs may hang. There are hardware work arounds
* for this. We warn about it in case your board doesn't have the work
* arounds. Basically that's so I can tell anyone with a B stepping
* CPU and SMP problems "tough".
*
* Specific items [From Pentium Processor Specification Update]
*
* 1AP. Linux doesn't use remote read
* 2AP. Linux doesn't trust APIC errors
* 3AP. We work around this
* 4AP. Linux never generated 3 interrupts of the same priority
* to cause a lost local interrupt.
* 5AP. Remote read is never used
* 6AP. not affected - worked around in hardware
* 7AP. not affected - worked around in hardware
* 8AP. worked around in hardware - we get explicit CS errors if not
* 9AP. only 'noapic' mode affected. Might generate spurious
* interrupts, we log only the first one and count the
* rest silently.
* 10AP. not affected - worked around in hardware
* 11AP. Linux reads the APIC between writes to avoid this, as per
* the documentation. Make sure you preserve this as it affects
* the C stepping chips too.
* 12AP. not affected - worked around in hardware
* 13AP. not affected - worked around in hardware
* 14AP. we always deassert INIT during bootup
* 15AP. not affected - worked around in hardware
* 16AP. not affected - worked around in hardware
* 17AP. not affected - worked around in hardware
* 18AP. not affected - worked around in hardware
* 19AP. not affected - worked around in BIOS
*
* If this sounds worrying believe me these bugs are either ___RARE___,
* or are signal timing bugs worked around in hardware and there's
* about nothing of note with C stepping upwards.
*/
static atomic_t stopping_cpu = ATOMIC_INIT(-1);
static bool smp_no_nmi_ipi = false;
/*
* this function sends a 'reschedule' IPI to another CPU.
* it goes straight through and wastes no time serializing
* anything. Worst case is that we lose a reschedule ...
*/
static void native_smp_send_reschedule(int cpu)
{
if (unlikely(cpu_is_offline(cpu))) {
WARN_ON(1);
return;
}
apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR);
}
void native_send_call_func_single_ipi(int cpu)
{
apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR);
}
void native_send_call_func_ipi(const struct cpumask *mask)
{
cpumask_var_t allbutself;
if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) {
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
return;
}
cpumask_copy(allbutself, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), allbutself);
if (cpumask_equal(mask, allbutself) &&
cpumask_equal(cpu_online_mask, cpu_callout_mask))
apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR);
else
apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
free_cpumask_var(allbutself);
}
static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
{
/* We are registered on stopping cpu too, avoid spurious NMI */
if (raw_smp_processor_id() == atomic_read(&stopping_cpu))
return NMI_HANDLED;
stop_this_cpu(NULL);
return NMI_HANDLED;
}
/*
* this function calls the 'stop' function on all other CPUs in the system.
*/
asmlinkage void smp_reboot_interrupt(void)
{
ack_APIC_irq();
irq_enter();
stop_this_cpu(NULL);
irq_exit();
}
static void native_stop_other_cpus(int wait)
{
unsigned long flags;
unsigned long timeout;
if (reboot_force)
return;
/*
* Use an own vector here because smp_call_function
* does lots of things not suitable in a panic situation.
*/
/*
* We start by using the REBOOT_VECTOR irq.
* The irq is treated as a sync point to allow critical
* regions of code on other cpus to release their spin locks
* and re-enable irqs. Jumping straight to an NMI might
* accidentally cause deadlocks with further shutdown/panic
* code. By syncing, we give the cpus up to one second to
* finish their work before we force them off with the NMI.
*/
if (num_online_cpus() > 1) {
/* did someone beat us here? */
if (atomic_cmpxchg(&stopping_cpu, -1, safe_smp_processor_id()) != -1)
return;
/* sync above data before sending IRQ */
wmb();
apic->send_IPI_allbutself(REBOOT_VECTOR);
/*
* Don't wait longer than a second if the caller
* didn't ask us to wait.
*/
timeout = USEC_PER_SEC;
while (num_online_cpus() > 1 && (wait || timeout--))
udelay(1);
}
/* if the REBOOT_VECTOR didn't work, try with the NMI */
if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi)) {
if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
NMI_FLAG_FIRST, "smp_stop"))
/* Note: we ignore failures here */
/* Hope the REBOOT_IRQ is good enough */
goto finish;
/* sync above data before sending IRQ */
wmb();
pr_emerg("Shutting down cpus with NMI\n");
apic->send_IPI_allbutself(NMI_VECTOR);
/*
* Don't wait longer than a 10 ms if the caller
* didn't ask us to wait.
*/
timeout = USEC_PER_MSEC * 10;
while (num_online_cpus() > 1 && (wait || timeout--))
udelay(1);
}
finish:
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
}
/*
* Reschedule call back.
*/
static inline void __smp_reschedule_interrupt(void)
{
inc_irq_stat(irq_resched_count);
scheduler_ipi();
}
void smp_reschedule_interrupt(struct pt_regs *regs)
{
ack_APIC_irq();
__smp_reschedule_interrupt();
/*
* KVM uses this interrupt to force a cpu out of guest mode
*/
}
void smp_trace_reschedule_interrupt(struct pt_regs *regs)
{
ack_APIC_irq();
trace_reschedule_entry(RESCHEDULE_VECTOR);
__smp_reschedule_interrupt();
trace_reschedule_exit(RESCHEDULE_VECTOR);
/*
* KVM uses this interrupt to force a cpu out of guest mode
*/
}
static inline void call_function_entering_irq(void)
{
ack_APIC_irq();
irq_enter();
}
static inline void __smp_call_function_interrupt(void)
{
generic_smp_call_function_interrupt();
inc_irq_stat(irq_call_count);
}
void smp_call_function_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
__smp_call_function_interrupt();
exiting_irq();
}
void smp_trace_call_function_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
trace_call_function_entry(CALL_FUNCTION_VECTOR);
__smp_call_function_interrupt();
trace_call_function_exit(CALL_FUNCTION_VECTOR);
exiting_irq();
}
static inline void __smp_call_function_single_interrupt(void)
{
generic_smp_call_function_single_interrupt();
inc_irq_stat(irq_call_count);
}
void smp_call_function_single_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
__smp_call_function_single_interrupt();
exiting_irq();
}
void smp_trace_call_function_single_interrupt(struct pt_regs *regs)
{
call_function_entering_irq();
trace_call_function_single_entry(CALL_FUNCTION_SINGLE_VECTOR);
__smp_call_function_single_interrupt();
trace_call_function_single_exit(CALL_FUNCTION_SINGLE_VECTOR);
exiting_irq();
}
static int __init nonmi_ipi_setup(char *str)
{
smp_no_nmi_ipi = true;
return 1;
}
__setup("nonmi_ipi", nonmi_ipi_setup);
struct smp_ops smp_ops = {
.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
.smp_prepare_cpus = native_smp_prepare_cpus,
.smp_cpus_done = native_smp_cpus_done,
.stop_other_cpus = native_stop_other_cpus,
.smp_send_reschedule = native_smp_send_reschedule,
.cpu_up = native_cpu_up,
.cpu_die = native_cpu_die,
.cpu_disable = native_cpu_disable,
.play_dead = native_play_dead,
.send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
EXPORT_SYMBOL_GPL(smp_ops);