kernel-hacking-2024-linux-s.../drivers/usb
Alan Stern 67b2e02974 USB: EHCI: fix handling of dead controllers
This patch (as1165) makes a few small changes in the logic used by
ehci-hcd when it encounters a controller error:

	Instead of printing out the masked status, it prints the
	original status as read directly from the hardware.

	It doesn't check for the STS_HALT status bit before taking
	action.  The mere fact that the STS_FATAL bit is set means
	that something bad has happened and the controller needs to
	be reset.  With the old code this test could never succeed
	because the STS_HALT bit was masked out from the status.

I anticipate that this will prevent the occasional "irq X: nobody cared"
problem people encounter when their EHCI controllers die.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:05 -08:00
..
atm USB: Speedtouch: add pre_reset and post_reset routines 2008-10-22 10:05:28 -07:00
c67x00
class USB: cdc-acm.c: fix recursive lock in acm_start_wb error path 2008-11-13 14:45:02 -08:00
core USB: mention URB_FREE_BUFFER in usb_free_urb documentation 2008-11-13 14:45:02 -08:00
gadget saner FASYNC handling on file close 2008-11-01 09:49:46 -07:00
host USB: EHCI: fix handling of dead controllers 2008-11-13 14:45:05 -08:00
image USB: remove err() macro from more usb drivers 2008-10-17 14:41:14 -07:00
misc USB: SISUSB2VGA driver: add 0x0711, 0x0903 2008-11-13 14:45:03 -08:00
mon usbmon: fix tiny race exposed by the fastboot patches 2008-10-17 14:40:57 -07:00
musb usb: musb: fix BULK request on different available endpoints 2008-11-13 14:45:01 -08:00
serial + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree 2008-11-13 14:45:03 -08:00
storage usb: unusual devs patch for Nokia 7610 Supernova 2008-11-13 14:45:03 -08:00
wusbcore uwb: don't use printk_ratelimit() so often 2008-10-16 13:56:53 +01:00
Kconfig Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2008-10-23 10:09:50 -07:00
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.