Scott Wood 874d72c4fe mtd: elbc nand: use drvdata to only remove the relevant chip ... Previously the remove method was looping and removing all chips, which is obviously not the right thing to do — left over from when the driver was organized differently and that was the remove method for the entire controller. This would result in bad things happening if you have more than one NAND chip, and remove the module. This also fixes priv->dev to properly point to the chip's device rather than the controller's. Until now priv->dev was only used for error/debug prints (and it's an improvement there), so this shouldn't break anything. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>		2012-07-06 18:17:05 +01:00
..
gpmi-nand	mtd: nand: gpmi: need to use {read,write}_oob_raw	2012-07-06 18:17:02 +01:00
alauda.c	mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN	2012-05-13 23:14:23 -05:00
ams-delta.c
atmel_nand.c	mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces	2012-05-13 23:20:00 -05:00
atmel_nand_ecc.h
au1550nd.c	mtd: nand: kill NAND_NO_AUTOINCR option	2012-05-13 23:15:38 -05:00
autcpu12.c
bcm_umi_bch.c	mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces	2012-05-13 23:20:00 -05:00
bcm_umi_nand.c	mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces	2012-05-13 23:20:00 -05:00
bf5xx_nand.c	mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces	2012-05-13 23:20:00 -05:00
cafe_nand.c	mtd: cafe_nand: spelling mistake	2012-07-06 18:17:02 +01:00
cmx270_nand.c
cs553x_nand.c	mtd: nand: kill NAND_NO_AUTOINCR option	2012-05-13 23:15:38 -05:00
davinci_nand.c
denali.c	mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'	2012-05-13 23:24:40 -05:00
denali.h
diskonchip.c
docg4.c	mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'	2012-05-13 23:24:40 -05:00
fsl_elbc_nand.c	mtd: elbc nand: use drvdata to only remove the relevant chip	2012-07-06 18:17:05 +01:00
fsl_ifc_nand.c	mtd: nand: kill NAND_NO_READRDY	2012-07-06 18:17:05 +01:00
fsl_upm.c
fsmc_nand.c	mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfaces	2012-05-13 23:20:00 -05:00
gpio.c
h1910.c	- More robust parsing especially of xattr data in JFFS2	2012-06-01 16:55:42 -07:00
jz4740_nand.c	mtd: nand: fix incorrect ecc strength values	2012-05-13 23:10:28 -05:00
Kconfig	mtd: nand: omap: add support for hardware BCH ecc	2012-05-13 23:25:51 -05:00
Makefile
mpc5121_nfc.c	mtd: nand: kill NAND_NO_AUTOINCR option	2012-05-13 23:15:38 -05:00
mxc_nand.c	nand: mxc_nand: Use clk_prepare_enable/clk_disable_unprepare	2012-07-06 18:17:05 +01:00
nand_base.c	mtd: nand: kill NAND_NO_READRDY	2012-07-06 18:17:05 +01:00
nand_bbt.c	mtd: nand: fix scan_read_raw_oob	2012-05-29 11:14:58 +03:00
nand_bch.c
nand_bcm_umi.c
nand_bcm_umi.h
nand_ecc.c
nand_ids.c	mtd: nand: kill NAND_NO_READRDY	2012-07-06 18:17:05 +01:00
nandsim.c	mtd: nandsim: don't open code a do_div helper	2012-07-06 16:59:33 +01:00
ndfc.c
nomadik_nand.c
nuc900_nand.c
omap2.c	mtd: nand: omap: add support for hardware BCH ecc	2012-05-13 23:25:51 -05:00
orion_nand.c	arm-soc: clock driver changes	2012-05-26 12:42:29 -07:00
pasemi_nand.c	mtd: nand: kill NAND_NO_AUTOINCR option	2012-05-13 23:15:38 -05:00
plat_nand.c	mtd: add read_byte support to plat_nand	2012-05-13 23:16:53 -05:00
ppchameleonevb.c
pxa3xx_nand.c	mtd: nand: kill NAND_NO_READRDY	2012-07-06 18:17:05 +01:00
r852.c	mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'	2012-05-13 23:24:40 -05:00
r852.h
rtc_from4.c
s3c2410.c
sh_flctl.c	mtd: sh_flctl: Use user oob data in hardware ECC mode	2012-07-06 18:17:04 +01:00
sharpsl.c
sm_common.c	mtd: nand: kill NAND_NO_AUTOINCR option	2012-05-13 23:15:38 -05:00
sm_common.h
socrates_nand.c
spia.c
tmio_nand.c
txx9ndfmc.c