unimore/kernel-hacking-2024-linux-steffo
unimore/kernel-hacking-2024-linux-steffo
1
Fork 0
Code Pull requests 5 Wiki Activity
kernel-hacking-2024-linux-s.../drivers/hwmon/adm1021.c
Jean Delvare 8a9947552d [PATCH] i2c: Drop i2c_driver.flags, 2 of 3 
Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we
can simply make it the default and drop the flag. If any driver really
doesn't want to be notified when i2c adapters are added, that driver
can simply omit to set .attach_adapter. This approach is also more
robust as it prevents accidental NULL pointer dereferences.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:21 -08:00

401 lines
13 KiB
C
Raw Blame History

/*
adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
0x29, 0x2a, 0x2b,
0x4c, 0x4d, 0x4e,
I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
/* adm1021 constants specified below */
/* The adm1021 registers */
/* Read-only */
#define ADM1021_REG_TEMP 0x00
#define ADM1021_REG_REMOTE_TEMP 0x01
#define ADM1021_REG_STATUS 0x02
#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */
#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */
/* These use different addresses for reading/writing */
#define ADM1021_REG_CONFIG_R 0x03
#define ADM1021_REG_CONFIG_W 0x09
#define ADM1021_REG_CONV_RATE_R 0x04
#define ADM1021_REG_CONV_RATE_W 0x0A
/* These are for the ADM1023's additional precision on the remote temp sensor */
#define ADM1021_REG_REM_TEMP_PREC 0x010
#define ADM1021_REG_REM_OFFSET 0x011
#define ADM1021_REG_REM_OFFSET_PREC 0x012
#define ADM1021_REG_REM_TOS_PREC 0x013
#define ADM1021_REG_REM_THYST_PREC 0x014
/* limits */
#define ADM1021_REG_TOS_R 0x05
#define ADM1021_REG_TOS_W 0x0B
#define ADM1021_REG_REMOTE_TOS_R 0x07
#define ADM1021_REG_REMOTE_TOS_W 0x0D
#define ADM1021_REG_THYST_R 0x06
#define ADM1021_REG_THYST_W 0x0C
#define ADM1021_REG_REMOTE_THYST_R 0x08
#define ADM1021_REG_REMOTE_THYST_W 0x0E
/* write-only */
#define ADM1021_REG_ONESHOT 0x0F
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
/* Conversions note: 1021 uses normal integer signed-byte format*/
#define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000)
#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
/* Initial values */
/* Note: Even though I left the low and high limits named os and hyst,
they don't quite work like a thermostat the way the LM75 does. I.e.,
a lower temp than THYST actually triggers an alarm instead of
clearing it. Weird, ey? --Phil */
/* Each client has this additional data */
struct adm1021_data {
struct i2c_client client;
struct class_device *class_dev;
enum chips type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 temp_max; /* Register values */
u8 temp_hyst;
u8 temp_input;
u8 remote_temp_max;
u8 remote_temp_hyst;
u8 remote_temp_input;
u8 alarms;
/* Special values for ADM1023 only */
u8 remote_temp_prec;
u8 remote_temp_os_prec;
u8 remote_temp_hyst_prec;
u8 remote_temp_offset;
u8 remote_temp_offset_prec;
};
static int adm1021_attach_adapter(struct i2c_adapter *adapter);
static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
static void adm1021_init_client(struct i2c_client *client);
static int adm1021_detach_client(struct i2c_client *client);
static int adm1021_read_value(struct i2c_client *client, u8 reg);
static int adm1021_write_value(struct i2c_client *client, u8 reg,
u16 value);
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
static int read_only;
/* This is the driver that will be inserted */
static struct i2c_driver adm1021_driver = {
.owner = THIS_MODULE,
.name = "adm1021",
.id = I2C_DRIVERID_ADM1021,
.attach_adapter = adm1021_attach_adapter,
.detach_client = adm1021_detach_client,
};
#define show(value) \
static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct adm1021_data *data = adm1021_update_device(dev); \
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
}
show(temp_max);
show(temp_hyst);
show(temp_input);
show(remote_temp_max);
show(remote_temp_hyst);
show(remote_temp_input);
#define show2(value) \
static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct adm1021_data *data = adm1021_update_device(dev); \
return sprintf(buf, "%d\n", data->value); \
}
show2(alarms);
#define set(value, reg) \
static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct adm1021_data *data = i2c_get_clientdata(client); \
int temp = simple_strtoul(buf, NULL, 10); \
\
down(&data->update_lock); \
data->value = TEMP_TO_REG(temp); \
adm1021_write_value(client, reg, data->value); \
up(&data->update_lock); \
return count; \
}
set(temp_max, ADM1021_REG_TOS_W);
set(temp_hyst, ADM1021_REG_THYST_W);
set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W);
set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W);
static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL);
static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max);
static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst);
static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static int adm1021_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
return i2c_probe(adapter, &addr_data, adm1021_detect);
}
static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
struct i2c_client *new_client;
struct adm1021_data *data;
int err = 0;
const char *type_name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto error0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1021_{read,write}_value. */
if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error0;
}
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
new_client->driver = &adm1021_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
if (kind < 0) {
if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00
|| (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00
|| (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) {
err = -ENODEV;
goto error1;
}
}
/* Determine the chip type. */
if (kind <= 0) {
i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
if (i == 0x41)
if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
kind = adm1023;
else
kind = adm1021;
else if (i == 0x49)
kind = thmc10;
else if (i == 0x23)
kind = gl523sm;
else if ((i == 0x4d) &&
(adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01))
kind = max1617a;
else if (i == 0x54)
kind = mc1066;
/* LM84 Mfr ID in a different place, and it has more unused bits */
else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00
&& (kind == 0 /* skip extra detection */
|| ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
&& (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00)))
kind = lm84;
else
kind = max1617;
}
if (kind == max1617) {
type_name = "max1617";
} else if (kind == max1617a) {
type_name = "max1617a";
} else if (kind == adm1021) {
type_name = "adm1021";
} else if (kind == adm1023) {
type_name = "adm1023";
} else if (kind == thmc10) {
type_name = "thmc10";
} else if (kind == lm84) {
type_name = "lm84";
} else if (kind == gl523sm) {
type_name = "gl523sm";
} else if (kind == mc1066) {
type_name = "mc1066";
}
/* Fill in the remaining client fields and put it into the global list */
strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto error1;
/* Initialize the ADM1021 chip */
if (kind != lm84)
adm1021_init_client(new_client);
/* Register sysfs hooks */
data->class_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto error2;
}
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_min);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp2_max);
device_create_file(&new_client->dev, &dev_attr_temp2_min);
device_create_file(&new_client->dev, &dev_attr_temp2_input);
device_create_file(&new_client->dev, &dev_attr_alarms);
return 0;
error2:
i2c_detach_client(new_client);
error1:
kfree(data);
error0:
return err;
}
static void adm1021_init_client(struct i2c_client *client)
{
/* Enable ADC and disable suspend mode */
adm1021_write_value(client, ADM1021_REG_CONFIG_W,
adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
/* Set Conversion rate to 1/sec (this can be tinkered with) */
adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
}
static int adm1021_detach_client(struct i2c_client *client)
{
struct adm1021_data *data = i2c_get_clientdata(client);
int err;
hwmon_device_unregister(data->class_dev);
if ((err = i2c_detach_client(client)))
return err;
kfree(data);
return 0;
}
/* All registers are byte-sized */
static int adm1021_read_value(struct i2c_client *client, u8 reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (!read_only)
return i2c_smbus_write_byte_data(client, reg, value);
return 0;
}
static struct adm1021_data *adm1021_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1021_data *data = i2c_get_clientdata(client);
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "Starting adm1021 update\n");
data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R);
data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c;
if (data->type == adm1023) {
data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
}
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
return data;
}
static int __init sensors_adm1021_init(void)
{
return i2c_add_driver(&adm1021_driver);
}
static void __exit sensors_adm1021_exit(void)
{
i2c_del_driver(&adm1021_driver);
}
MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("adm1021 driver");
MODULE_LICENSE("GPL");
module_param(read_only, bool, 0);
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
module_init(sensors_adm1021_init)
module_exit(sensors_adm1021_exit)
View git blame Copy permalink