unimore/kernel-hacking-2024-linux-steffo
unimore/kernel-hacking-2024-linux-steffo
1
Fork 0
Code Pull requests 5 Wiki Activity
kernel-hacking-2024-linux-s.../drivers/mfd/wm831x-irq.c
Mark Brown b103e0b3c5 mfd: Support configuration of WM831x /IRQ output in CMOS mode 
Provide platform data allowing the system to set the /IRQ pin into
CMOS mode rather than the default open drain. The default value of
this platform data reflects the default hardware configuration so
there should be no change to existing users.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:44 +01:00

582 lines
13 KiB
C
Raw Blame History

/*
* wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/gpio.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/delay.h>
/*
* Since generic IRQs don't currently support interrupt controllers on
* interrupt driven buses we don't use genirq but instead provide an
* interface that looks very much like the standard ones. This leads
* to some bodges, including storing interrupt handler information in
* the static irq_data table we use to look up the data for individual
* interrupts, but hopefully won't last too long.
*/
struct wm831x_irq_data {
int primary;
int reg;
int mask;
};
static struct wm831x_irq_data wm831x_irqs[] = {
[WM831X_IRQ_TEMP_THW] = {
.primary = WM831X_TEMP_INT,
.reg = 1,
.mask = WM831X_TEMP_THW_EINT,
},
[WM831X_IRQ_GPIO_1] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP1_EINT,
},
[WM831X_IRQ_GPIO_2] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP2_EINT,
},
[WM831X_IRQ_GPIO_3] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP3_EINT,
},
[WM831X_IRQ_GPIO_4] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP4_EINT,
},
[WM831X_IRQ_GPIO_5] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP5_EINT,
},
[WM831X_IRQ_GPIO_6] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP6_EINT,
},
[WM831X_IRQ_GPIO_7] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP7_EINT,
},
[WM831X_IRQ_GPIO_8] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP8_EINT,
},
[WM831X_IRQ_GPIO_9] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP9_EINT,
},
[WM831X_IRQ_GPIO_10] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP10_EINT,
},
[WM831X_IRQ_GPIO_11] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP11_EINT,
},
[WM831X_IRQ_GPIO_12] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP12_EINT,
},
[WM831X_IRQ_GPIO_13] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP13_EINT,
},
[WM831X_IRQ_GPIO_14] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP14_EINT,
},
[WM831X_IRQ_GPIO_15] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP15_EINT,
},
[WM831X_IRQ_GPIO_16] = {
.primary = WM831X_GP_INT,
.reg = 5,
.mask = WM831X_GP16_EINT,
},
[WM831X_IRQ_ON] = {
.primary = WM831X_ON_PIN_INT,
.reg = 1,
.mask = WM831X_ON_PIN_EINT,
},
[WM831X_IRQ_PPM_SYSLO] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_SYSLO_EINT,
},
[WM831X_IRQ_PPM_PWR_SRC] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_PWR_SRC_EINT,
},
[WM831X_IRQ_PPM_USB_CURR] = {
.primary = WM831X_PPM_INT,
.reg = 1,
.mask = WM831X_PPM_USB_CURR_EINT,
},
[WM831X_IRQ_WDOG_TO] = {
.primary = WM831X_WDOG_INT,
.reg = 1,
.mask = WM831X_WDOG_TO_EINT,
},
[WM831X_IRQ_RTC_PER] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_PER_EINT,
},
[WM831X_IRQ_RTC_ALM] = {
.primary = WM831X_RTC_INT,
.reg = 1,
.mask = WM831X_RTC_ALM_EINT,
},
[WM831X_IRQ_CHG_BATT_HOT] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_HOT_EINT,
},
[WM831X_IRQ_CHG_BATT_COLD] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_COLD_EINT,
},
[WM831X_IRQ_CHG_BATT_FAIL] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_BATT_FAIL_EINT,
},
[WM831X_IRQ_CHG_OV] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_OV_EINT,
},
[WM831X_IRQ_CHG_END] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_END_EINT,
},
[WM831X_IRQ_CHG_TO] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_TO_EINT,
},
[WM831X_IRQ_CHG_MODE] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_MODE_EINT,
},
[WM831X_IRQ_CHG_START] = {
.primary = WM831X_CHG_INT,
.reg = 2,
.mask = WM831X_CHG_START_EINT,
},
[WM831X_IRQ_TCHDATA] = {
.primary = WM831X_TCHDATA_INT,
.reg = 1,
.mask = WM831X_TCHDATA_EINT,
},
[WM831X_IRQ_TCHPD] = {
.primary = WM831X_TCHPD_INT,
.reg = 1,
.mask = WM831X_TCHPD_EINT,
},
[WM831X_IRQ_AUXADC_DATA] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DATA_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP1] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP1_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP2] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP2_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP3] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP3_EINT,
},
[WM831X_IRQ_AUXADC_DCOMP4] = {
.primary = WM831X_AUXADC_INT,
.reg = 1,
.mask = WM831X_AUXADC_DCOMP4_EINT,
},
[WM831X_IRQ_CS1] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS1_EINT,
},
[WM831X_IRQ_CS2] = {
.primary = WM831X_CS_INT,
.reg = 2,
.mask = WM831X_CS2_EINT,
},
[WM831X_IRQ_HC_DC1] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC1_EINT,
},
[WM831X_IRQ_HC_DC2] = {
.primary = WM831X_HC_INT,
.reg = 4,
.mask = WM831X_HC_DC2_EINT,
},
[WM831X_IRQ_UV_LDO1] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO1_EINT,
},
[WM831X_IRQ_UV_LDO2] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO2_EINT,
},
[WM831X_IRQ_UV_LDO3] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO3_EINT,
},
[WM831X_IRQ_UV_LDO4] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO4_EINT,
},
[WM831X_IRQ_UV_LDO5] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO5_EINT,
},
[WM831X_IRQ_UV_LDO6] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO6_EINT,
},
[WM831X_IRQ_UV_LDO7] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO7_EINT,
},
[WM831X_IRQ_UV_LDO8] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO8_EINT,
},
[WM831X_IRQ_UV_LDO9] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO9_EINT,
},
[WM831X_IRQ_UV_LDO10] = {
.primary = WM831X_UV_INT,
.reg = 3,
.mask = WM831X_UV_LDO10_EINT,
},
[WM831X_IRQ_UV_DC1] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC1_EINT,
},
[WM831X_IRQ_UV_DC2] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC2_EINT,
},
[WM831X_IRQ_UV_DC3] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC3_EINT,
},
[WM831X_IRQ_UV_DC4] = {
.primary = WM831X_UV_INT,
.reg = 4,
.mask = WM831X_UV_DC4_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
{
return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x,
int irq)
{
return &wm831x_irqs[irq - wm831x->irq_base];
}
static void wm831x_irq_lock(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
mutex_lock(&wm831x->irq_lock);
}
static void wm831x_irq_sync_unlock(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int i;
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
if (wm831x->irq_masks_cur[i] != wm831x->irq_masks_cache[i]) {
wm831x->irq_masks_cache[i] = wm831x->irq_masks_cur[i];
wm831x_reg_write(wm831x,
WM831X_INTERRUPT_STATUS_1_MASK + i,
wm831x->irq_masks_cur[i]);
}
}
mutex_unlock(&wm831x->irq_lock);
}
static void wm831x_irq_unmask(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
data->irq);
wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
static void wm831x_irq_mask(struct irq_data *data)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x,
data->irq);
wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static int wm831x_irq_set_type(struct irq_data *data, unsigned int type)
{
struct wm831x *wm831x = irq_data_get_irq_chip_data(data);
int val, irq;
irq = data->irq - wm831x->irq_base;
if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
/* Ignore internal-only IRQs */
if (irq >= 0 && irq < WM831X_NUM_IRQS)
return 0;
else
return -EINVAL;
}
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
val = WM831X_GPN_INT_MODE;
break;
case IRQ_TYPE_EDGE_RISING:
val = WM831X_GPN_POL;
break;
case IRQ_TYPE_EDGE_FALLING:
val = 0;
break;
default:
return -EINVAL;
}
return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + irq,
WM831X_GPN_INT_MODE | WM831X_GPN_POL, val);
}
static struct irq_chip wm831x_irq_chip = {
.name = "wm831x",
.irq_bus_lock = wm831x_irq_lock,
.irq_bus_sync_unlock = wm831x_irq_sync_unlock,
.irq_mask = wm831x_irq_mask,
.irq_unmask = wm831x_irq_unmask,
.irq_set_type = wm831x_irq_set_type,
};
/* The processing of the primary interrupt occurs in a thread so that
* we can interact with the device over I2C or SPI. */
static irqreturn_t wm831x_irq_thread(int irq, void *data)
{
struct wm831x *wm831x = data;
unsigned int i;
int primary;
int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
int read[WM831X_NUM_IRQ_REGS] = { 0 };
int *status;
primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
if (primary < 0) {
dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
primary);
goto out;
}
for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
int offset = wm831x_irqs[i].reg - 1;
if (!(primary & wm831x_irqs[i].primary))
continue;
status = &status_regs[offset];
/* Hopefully there should only be one register to read
* each time otherwise we ought to do a block read. */
if (!read[offset]) {
*status = wm831x_reg_read(wm831x,
irq_data_to_status_reg(&wm831x_irqs[i]));
if (*status < 0) {
dev_err(wm831x->dev,
"Failed to read IRQ status: %d\n",
*status);
goto out;
}
read[offset] = 1;
}
/* Report it if it isn't masked, or forget the status. */
if ((*status & ~wm831x->irq_masks_cur[offset])
& wm831x_irqs[i].mask)
handle_nested_irq(wm831x->irq_base + i);
else
*status &= ~wm831x_irqs[i].mask;
}
out:
/* Touchscreen interrupts are handled specially in the driver */
status_regs[0] &= ~(WM831X_TCHDATA_EINT | WM831X_TCHPD_EINT);
for (i = 0; i < ARRAY_SIZE(status_regs); i++) {
if (status_regs[i])
wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1 + i,
status_regs[i]);
}
return IRQ_HANDLED;
}
int wm831x_irq_init(struct wm831x *wm831x, int irq)
{
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
int i, cur_irq, ret;
mutex_init(&wm831x->irq_lock);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) {
wm831x->irq_masks_cur[i] = 0xffff;
wm831x->irq_masks_cache[i] = 0xffff;
wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
return 0;
}
if (!pdata || !pdata->irq_base) {
dev_err(wm831x->dev,
"No interrupt base specified, no interrupts\n");
return 0;
}
if (pdata->irq_cmos)
i = 0;
else
i = WM831X_IRQ_OD;
wm831x_set_bits(wm831x, WM831X_IRQ_CONFIG,
WM831X_IRQ_OD, i);
/* Try to flag /IRQ as a wake source; there are a number of
* unconditional wake sources in the PMIC so this isn't
* conditional but we don't actually care *too* much if it
* fails.
*/
ret = enable_irq_wake(irq);
if (ret != 0) {
dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n",
ret);
}
wm831x->irq = irq;
wm831x->irq_base = pdata->irq_base;
/* Register them with genirq */
for (cur_irq = wm831x->irq_base;
cur_irq < ARRAY_SIZE(wm831x_irqs) + wm831x->irq_base;
cur_irq++) {
set_irq_chip_data(cur_irq, wm831x);
set_irq_chip_and_handler(cur_irq, &wm831x_irq_chip,
handle_edge_irq);
set_irq_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
set_irq_noprobe(cur_irq);
#endif
}
ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"wm831x", wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
irq, ret);
return ret;
}
/* Enable top level interrupts, we mask at secondary level */
wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
return 0;
}
void wm831x_irq_exit(struct wm831x *wm831x)
{
if (wm831x->irq)
free_irq(wm831x->irq, wm831x);
}
View git blame Copy permalink