Bartlomiej Zolnierkiewicz ffe5415c3d siimage: fix ->set_pio_mode method to select PIO data transfer ... * Remember to select PIO data transfer (with IORDY monitored) in sil_tune_pio() (->set_pio_mode method) so the controller is always programmed correctly for PIO transfers (this is important if DMA is not going to be used). * Don't set DMA/UDMA timings for PIO modes in siimage_tune_chipset(). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>		2007-10-11 23:54:01 +02:00
..
aec62xx.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
alim15x3.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
amd74xx.c	amd74xx/via82cxxx: use ide_tune_dma()	2007-10-11 23:54:00 +02:00
atiixp.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
cmd64x.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
cmd640.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
cs5520.c	cs5520: don't enable VDMA in ->speedproc	2007-10-11 23:54:01 +02:00
cs5530.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
cs5535.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
cy82c693.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
delkin_cb.c
generic.c	ide: add ide_pci_device_t.host_flags (take 2)	2007-07-20 01:11:55 +02:00
hpt34x.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
hpt366.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
it821x.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
it8213.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
jmicron.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
Makefile
ns87415.c	ide: config_drive_for_dma() fixes	2007-08-20 22:42:55 +02:00
opti621.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
pdc202xx_new.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
pdc202xx_old.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
piix.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
rz1000.c	ide: add ide_pci_device_t.host_flags (take 2)	2007-07-20 01:11:55 +02:00
sc1200.c	sc1200: remove redundant warning message from sc1200_tune_chipset()	2007-10-11 23:54:01 +02:00
scc_pata.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
serverworks.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
sgiioc4.c	sgiioc4: use ide_tune_dma()	2007-10-11 23:54:00 +02:00
siimage.c	siimage: fix ->set_pio_mode method to select PIO data transfer	2007-10-11 23:54:01 +02:00
sis5513.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
sl82c105.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
slc90e66.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
tc86c001.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
triflex.c	ide: add ide_set{_max}_pio() (take 4)	2007-10-11 23:54:00 +02:00
trm290.c	ide: add ide_pci_device_t.host_flags (take 2)	2007-07-20 01:11:55 +02:00
via82cxxx.c	amd74xx/via82cxxx: use ide_tune_dma()	2007-10-11 23:54:00 +02:00