Make kvm_gpc_refresh() use kvm instance cached in gfn_to_pfn_cache.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: leave kvm_gpc_unmap() as-is]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make hva_to_pfn_retry() use kvm instance cached in gfn_to_pfn_cache.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Make kvm_gpc_check() use kvm instance cached in gfn_to_pfn_cache.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Move the assignment of immutable properties @kvm, @vcpu, and @usage to
the initializer. Make _activate() and _deactivate() use stored values.
Note, @len is also effectively immutable for most cases, but not in the
case of the Xen runstate cache, which may be split across two pages and
the length of the first segment will depend on its address.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: handle @len in a separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[dwmw2: acknowledge that @len can actually change for some use cases]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
This patch introduces compat version of struct sched_poll for
SCHEDOP_poll sub-operation of sched_op hypercall, reads correct amount
of data (16 bytes in 32-bit case, 24 bytes otherwise) by using new
compat_sched_poll struct, copies it to sched_poll properly, and lets
rest of the code run as is.
Signed-off-by: Metin Kaya <metikaya@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
If a triple fault was fixed by kvm_x86_ops.nested_ops->triple_fault (by
turning it into a vmexit), there is no need to leave vcpu_enter_guest().
Any vcpu->requests will be caught later before the actual vmentry,
and in fact vcpu_enter_guest() was not initializing the "r" variable.
Depending on the compiler's whims, this could cause the
x86_64/triple_fault_event_test test to fail.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 92e7d5c83a ("KVM: x86: allow L1 to not intercept triple fault")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the unused @kvm argument from gpc_unmap_khva().
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Formalize "gpc" as the acronym and use it in function names.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Torture test the cases where the runstate crosses a page boundary, and
and especially the case where it's configured in 32-bit mode and doesn't,
but then switching to 64-bit mode makes it go onto the second page.
To simplify this, make the KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST ioctl
also update the guest runstate area. It already did so if the actual
runstate changed, as a side-effect of kvm_xen_update_runstate(). So
doing it in the plain adjustment case is making it more consistent, as
well as giving us a nice way to trigger the update without actually
running the vCPU again and changing the values.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Closer inspection of the Xen code shows that we aren't supposed to be
using the XEN_RUNSTATE_UPDATE flag unconditionally. It should be
explicitly enabled by guests through the HYPERVISOR_vm_assist hypercall.
If we randomly set the top bit of ->state_entry_time for a guest that
hasn't asked for it and doesn't expect it, that could make the runtimes
fail to add up and confuse the guest. Without the flag it's perfectly
safe for a vCPU to read its own vcpu_runstate_info; just not for one
vCPU to read *another's*.
I briefly pondered adding a word for the whole set of VMASST_TYPE_*
flags but the only one we care about for HVM guests is this, so it
seemed a bit pointless.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20221127122210.248427-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest runstate area can be arbitrarily byte-aligned. In fact, even
when a sane 32-bit guest aligns the overall structure nicely, the 64-bit
fields in the structure end up being unaligned due to the fact that the
32-bit ABI only aligns them to 32 bits.
So setting the ->state_entry_time field to something|XEN_RUNSTATE_UPDATE
is buggy, because if it's unaligned then we can't update the whole field
atomically; the low bytes might be observable before the _UPDATE bit is.
Xen actually updates the *byte* containing that top bit, on its own. KVM
should do the same.
In addition, we cannot assume that the runstate area fits within a single
page. One option might be to make the gfn_to_pfn cache cope with regions
that cross a page — but getting a contiguous virtual kernel mapping of a
discontiguous set of IOMEM pages is a distinctly non-trivial exercise,
and it seems this is the *only* current use case for the GPC which would
benefit from it.
An earlier version of the runstate code did use a gfn_to_hva cache for
this purpose, but it still had the single-page restriction because it
used the uhva directly — because it needs to be able to do so atomically
when the vCPU is being scheduled out, so it used pagefault_disable()
around the accesses and didn't just use kvm_write_guest_cached() which
has a fallback path.
So... use a pair of GPCs for the first and potential second page covering
the runstate area. We can get away with locking both at once because
nothing else takes more than one GPC lock at a time so we can invent
a trivial ordering rule.
The common case where it's all in the same page is kept as a fast path,
but in both cases, the actual guest structure (compat or not) is built
up from the fields in @vx, following preset pointers to the state and
times fields. The only difference is whether those pointers point to
the kernel stack (in the split case) or to guest memory directly via
the GPC. The fast path is also fixed to use a byte access for the
XEN_RUNSTATE_UPDATE bit, then the only real difference is the dual
memcpy.
Finally, Xen also does write the runstate area immediately when it's
configured. Flip the kvm_xen_update_runstate() and …_guest() functions
and call the latter directly when the runstate area is set. This means
that other ioctls which modify the runstate also write it immediately
to the guest when they do so, which is also intended.
Update the xen_shinfo_test to exercise the pathological case where the
XEN_RUNSTATE_UPDATE flag in the top byte of the state_entry_time is
actually in a different page to the rest of the 64-bit word.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
-----BEGIN PGP SIGNATURE-----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=/1yt
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address support
- Removal of a unused function
Latest Intel platform Granite Rapids has introduced a new instruction -
PREFETCHIT0/1, which moves code to memory (cache) closer to the
processor depending on specific hints.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 14]
PREFETCHIT0/1 is on a KVM-only subleaf. Plus an x86_FEATURE definition
for this feature bit to direct it to the KVM entry.
Advertise PREFETCHIT0/1 to KVM userspace. This is safe because there are
no new VMX controls or additional host enabling required for guests to
use this feature.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Message-Id: <20221125125845.1182922-9-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-NE-CONVERT is a new set of instructions which can convert low
precision floating point like BF16/FP16 to high precision floating point
FP32, and can also convert FP32 elements to BF16. This instruction
allows the platform to have improved AI capabilities and better
compatibility.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 5]
AVX-NE-CONVERT is on a KVM-only subleaf. Plus an x86_FEATURE definition
for this feature bit to direct it to the KVM entry.
Advertise AVX-NE-CONVERT to KVM userspace. This is safe because there
are no new VMX controls or additional host enabling required for guests
to use this feature.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Message-Id: <20221125125845.1182922-8-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-VNNI-INT8 is a new set of instructions in the latest Intel platform
Sierra Forest, aims for the platform to have superior AI capabilities.
This instruction multiplies the individual bytes of two unsigned or
unsigned source operands, then adds and accumulates the results into the
destination dword element size operand.
The bit definition:
CPUID.(EAX=7,ECX=1):EDX[bit 4]
AVX-VNNI-INT8 is on a new and sparse CPUID leaf and all bits on this
leaf have no truly kernel use case for now. Given that and to save space
for kernel feature bits, move this new leaf to KVM-only subleaf and plus
an x86_FEATURE definition for AVX-VNNI-INT8 to direct it to the KVM
entry.
Advertise AVX-VNNI-INT8 to KVM userspace. This is safe because there are
no new VMX controls or additional host enabling required for guests to
use this feature.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Message-Id: <20221125125845.1182922-7-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX-IFMA is a new instruction in the latest Intel platform Sierra
Forest. This instruction packed multiplies unsigned 52-bit integers and
adds the low/high 52-bit products to Qword Accumulators.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 23]
AVX-IFMA is on an expected-dense CPUID leaf and some other bits on this
leaf have kernel usages. Given that, define this feature bit like
X86_FEATURE_<name> in kernel. Considering AVX-IFMA itself has no truly
kernel usages and /proc/cpuinfo has too much unreadable flags, hide this
one in /proc/cpuinfo.
Advertise AVX-IFMA to KVM userspace. This is safe because there are no
new VMX controls or additional host enabling required for guests to use
this feature.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Message-Id: <20221125125845.1182922-6-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Latest Intel platform Granite Rapids has introduced a new instruction -
AMX-FP16, which performs dot-products of two FP16 tiles and accumulates
the results into a packed single precision tile. AMX-FP16 adds FP16
capability and also allows a FP16 GPU trained model to run faster
without loss of accuracy or added SW overhead.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 21]
AMX-FP16 is on an expected-dense CPUID leaf and some other bits on this
leaf have kernel usages. Given that, define this feature bit like
X86_FEATURE_<name> in kernel. Considering AMX-FP16 itself has no truly
kernel usages and /proc/cpuinfo has too much unreadable flags, hide this
one in /proc/cpuinfo.
Advertise AMX-FP16 to KVM userspace. This is safe because there are no
new VMX controls or additional host enabling required for guests to use
this feature.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Message-Id: <20221125125845.1182922-5-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CMPccXADD is a new set of instructions in the latest Intel platform
Sierra Forest. This new instruction set includes a semaphore operation
that can compare and add the operands if condition is met, which can
improve database performance.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 7]
CMPccXADD is on an expected-dense CPUID leaf and some other bits on this
leaf have kernel usages. Given that, define this feature bit like
X86_FEATURE_<name> in kernel. Considering CMPccXADD itself has no truly
kernel usages and /proc/cpuinfo has too much unreadable flags, hide this
one in /proc/cpuinfo.
Advertise CMPCCXADD to KVM userspace. This is safe because there are no
new VMX controls or additional host enabling required for guests to use
this feature.
Signed-off-by: Jiaxi Chen <jiaxi.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Message-Id: <20221125125845.1182922-4-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_cpu_cap_init_scattered() to kvm_cpu_cap_init_kvm_defined() in
anticipation of adding KVM-only CPUID leafs that aren't recognized by the
kernel and thus not scattered, i.e. for leafs that are 100% KVM-defined.
Adjust/add comments to kvm_only_cpuid_leafs and KVM_X86_FEATURE to
document how to create new kvm_only_cpuid_leafs entries for scattered
features as well as features that are entirely unknown to the kernel.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221125125845.1182922-3-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a compile-time assert in the SF() macro to detect improper usage,
i.e. to detect passing in an X86_FEATURE_* flag that isn't actually
scattered by the kernel. Upcoming feature flags will be 100% KVM-only
and will have X86_FEATURE_* macros that point at a kvm_only_cpuid_leafs
word, not a kernel-defined word. Using SF() and thus boot_cpu_has() for
such feature flags would access memory beyond x86_capability[NCAPINTS]
and at best incorrectly hide a feature, and at worst leak kernel state to
userspace.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221125125845.1182922-2-jiaxi.chen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adding Paul as co-maintainer of Xen support to help ensure that things
don't fall through the cracks when I spend three months at a time
travelling...
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Architecture code might want to use it even if CONFIG_HAVE_KVM_IRQ_ROUTING
is false; for example PPC XICS has KVM_IRQ_LINE and wants to use
kvm_arch_irqchip_in_kernel from there, but it does not have
KVM_SET_GSI_ROUTING so the prototype was not provided.
Fixes: d663b8a285 ("KVM: replace direct irq.h inclusion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case where a GPC is refreshed to a different location within the
same page, we didn't bother to update it. Mostly we don't need to, but
since the ->khva field also includes the offset within the page, that
does have to be updated.
Fixes: 3ba2c95ea1 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are almost no hypercalls which are valid from CPL > 0, and definitely
none which are handled by the kernel.
Fixes: 2fd6df2f2b ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We shouldn't allow guests to poll on arbitrary port numbers off the end
of the event channel table.
Fixes: 1a65105a5a ("KVM: x86/xen: handle PV spinlocks slowpath")
[dwmw2: my bug though; the original version did check the validity as a
side-effect of an idr_find() which I ripped out in refactoring.]
Reported-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang warns about an unused function:
arch/s390/kvm/interrupt.c:317:20:
error: unused function 'gisa_clear_ipm_gisc' [-Werror,-Wunused-function]
static inline void gisa_clear_ipm_gisc(struct kvm_s390_gisa *gisa, u32 gisc)
Remove gisa_clear_ipm_gisc(), since it is unused and get rid of this
warning.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20221118151133.2974602-1-hca@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same)
for the GISA when enabling the IRQ.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20221118100429.70453-1-nrb@linux.ibm.com
Message-Id: <20221118100429.70453-1-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add the module parameter "async_destroy", to allow the asynchronous
destroy mechanism to be switched off. This might be useful for
debugging purposes.
The parameter is enabled by default since the feature is opt-in anyway.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-7-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-7-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add support for the Destroy Secure Configuration Fast Ultravisor call,
and take advantage of it for asynchronous destroy.
When supported, the protected guest is destroyed immediately using the
new UVC, leaving only the memory to be cleaned up asynchronously.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-6-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-6-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If the appropriate UV feature bit is set, there is no need to perform
an export before import.
The misc feature indicates, among other things, that importing a shared
page from a different protected VM will automatically also transfer its
ownership.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-5-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-5-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add KVM_CAP_S390_PROTECTED_ASYNC_DISABLE to signal that the
KVM_PV_ASYNC_DISABLE and KVM_PV_ASYNC_DISABLE_PREPARE commands for the
KVM_S390_PV_COMMAND ioctl are available.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-4-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add documentation for the new commands added to the KVM_S390_PV_COMMAND
ioctl.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-3-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Until now, destroying a protected guest was an entirely synchronous
operation that could potentially take a very long time, depending on
the size of the guest, due to the time needed to clean up the address
space from protected pages.
This patch implements an asynchronous destroy mechanism, that allows a
protected guest to reboot significantly faster than previously.
This is achieved by clearing the pages of the old guest in background.
In case of reboot, the new guest will be able to run in the same
address space almost immediately.
The old protected guest is then only destroyed when all of its memory
has been destroyed or otherwise made non protected.
Two new PV commands are added for the KVM_S390_PV_COMMAND ioctl:
KVM_PV_ASYNC_CLEANUP_PREPARE: set aside the current protected VM for
later asynchronous teardown. The current KVM VM will then continue
immediately as non-protected. If a protected VM had already been
set aside for asynchronous teardown, but without starting the teardown
process, this call will fail. There can be at most one VM set aside at
any time. Once it is set aside, the protected VM only exists in the
context of the Ultravisor, it is not associated with the KVM VM
anymore. Its protected CPUs have already been destroyed, but not its
memory. This command can be issued again immediately after starting
KVM_PV_ASYNC_CLEANUP_PERFORM, without having to wait for completion.
KVM_PV_ASYNC_CLEANUP_PERFORM: tears down the protected VM previously
set aside using KVM_PV_ASYNC_CLEANUP_PREPARE. Ideally the
KVM_PV_ASYNC_CLEANUP_PERFORM PV command should be issued by userspace
from a separate thread. If a fatal signal is received (or if the
process terminates naturally), the command will terminate immediately
without completing. All protected VMs whose teardown was interrupted
will be put in the need_cleanup list. The rest of the normal KVM
teardown process will take care of properly cleaning up all remaining
protected VMs, including the ones on the need_cleanup list.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111170632.77622-2-imbrenda@linux.ibm.com
Message-Id: <20221111170632.77622-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Conform to the rest of Hyper-V emulation selftests which have 'hyperv'
prefix. Get rid of '_test' suffix as well as the purpose of this code
is fairly obvious.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-49-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the Partition
assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-48-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable Hyper-V L2 TLB flush and check that Hyper-V TLB flush hypercalls
from L2 don't exit to L1 unless 'TlbLockCount' is set in the
Partition assist page.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-47-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V MSR-Bitmap tests do RDMSR from L2 to exit to L1. While 'evmcs_test'
correctly clobbers all GPRs (which are not preserved), 'hyperv_svm_test'
does not. Introduce a more generic rdmsr_from_l2() to avoid code
duplication and remove hardcoding of MSRs. Do not put it in common code
because it is really just a selftests bug rather than a processor
feature that requires it.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-46-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmmcall()/vmcall() are used to exit from L2 to L1 and no concrete hypercall
ABI is currenty followed. With the introduction of Hyper-V L2 TLB flush
it becomes (theoretically) possible that L0 will take responsibility for
handling the call and no L1 exit will happen. Prevent this by stuffing RAX
(KVM ABI) and RCX (Hyper-V ABI) with 'safe' values.
While on it, convert vmmcall() to 'static inline', make it setup stack
frame and move to include/x86_64/svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-45-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to pollute VMX and SVM code with Hyper-V specific
stuff and allocate Hyper-V specific test pages for all test as only
few really need them. Create a dedicated struct and an allocation
helper.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-43-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to putting Hyper-V specific test pages to a dedicated
struct, move eVMCS load logic from load_vmcs(). Tests call load_vmcs()
directly and the only one which needs 'enlightened' version is
evmcs_test so there's not much gain in having this merged.
Temporary pass both GPA and HVA to load_evmcs().
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-42-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V VP assist page is not eVMCS specific, it is also used for
enlightened nSVM. Move the code to vendor neutral place.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-41-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_vp_assist_page' definition doesn't match TLFS. Also, define
'struct hv_nested_enlightenments_control' and use it instead of opaque
'__u64'.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-40-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'struct hv_enlightened_vmcs' definition in selftests is not '__packed'
and so we rely on the compiler doing the right padding. This is not
obvious so it seems beneficial to use the same definition as in kernel.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-39-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV TLB flush hypercalls
(HvFlushVirtualAddressSpace/HvFlushVirtualAddressSpaceEx,
HvFlushVirtualAddressList/HvFlushVirtualAddressListEx).
The test creates one 'sender' vCPU and two 'worker' vCPU which do busy
loop reading from a certain GVA checking the observed value. Sender
vCPU swaos the data page with another page filled with a different value.
The expectation for workers is also altered. Without TLB flush on worker
vCPUs, they may continue to observe old value. To guard against accidental
TLB flushes for worker vCPUs the test is repeated 100 times.
Hyper-V TLB flush hypercalls are tested in both 'normal' and 'XMM
fast' modes.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-38-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, tests can only request a new vaddr range by using
vm_vaddr_alloc()/vm_vaddr_alloc_page()/vm_vaddr_alloc_pages() but
these functions allocate and map physical pages too. Make it possible
to request unmapped range too.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-36-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to vm_vaddr_alloc(), virt_map() needs to reflect the mapping
in vm->vpages_mapped.
While on it, remove unneeded code wrapping in vm_vaddr_alloc().
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-35-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a selftest for Hyper-V PV IPI hypercalls
(HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx).
The test creates one 'sender' vCPU and two 'receiver' vCPU and then
issues various combinations of send IPI hypercalls in both 'normal'
and 'fast' (with XMM input where necessary) mode. Later, the test
checks whether IPIs were delivered to the expected destination vCPU[s].
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-34-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
