Commit 0c52310f26 ("hrtimer: Ignore slack time for RT tasks in
schedule_hrtimeout_range()") effectivelly shortens a sleep in a polling
function in the driver. That is causing a performance regression as the
new value of just 2us is too low, in certain tests the perf drop is ~30%.
Fix this by adjusting the sleep to 20us (close to the previous value).
Reported-by: Jan Jurca <jjurca@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20240903144729.37218-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth
values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it
missed updating the cfg_bw value for the max mode.
Hence update the cfg_bw value for the max mode for UFS 4.x devices.
Fixes: 8db8f6ce55 ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903063709.4335-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in an ioc_info message.
Remove it and join to split literal strings into one.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902172708.369741-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in two lpfc_printf_log()
messages. Remove the space.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902150042.311157-1-colin.i.king@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in a pm8001_dbg message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141537.308914-1-colin.i.king@gmail.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a extraneous space after a newline in a dev_printk message,
remove it. Also fix non-tabbed indentation of the statement.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240902141202.308632-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using the real macro is usually more intuitive and readable when the
original file is guaranteed to contain the minmax.h header file and compile
correctly.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://lore.kernel.org/r/20240902013303.909316-1-yanzhen@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Usage of .dev_ddp_cleanup() in libcxgbi was removed by commit 5999299f1c
("cxgb3i,cxgb4i,libcxgbi: remove iSCSI DDP support") on 2016-07.
.csk_rx_pdu_ready() and debugfs_root have apparently never been used since
introduction by commit 9ba682f01e ("[SCSI] libcxgbi: common library for
cxgb3i and cxgb4i")
Remove the now unused function pointer from struct cxgbi_device.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/58f77f690d85e2c653447e3e3fc4f8d3c3ce8563.1725223504.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are some scenarios that can occur, such as performing an upgrade of
the virtual I/O server, where the supported max transfer of the backing
device for an ibmvfc HBA can change. If the max transfer of the backing
device decreases, this can cause issues with previously discovered
LUNs. This patch accomplishes two things. First, it changes the default
ibmvfc max transfer value to 1MB. This is generally supported by all
backing devices, which should mitigate this issue out of the box. Secondly,
it adds a module parameter, enabling a user to increase the max transfer
value to values that are larger than 1MB, as long as they have configured
these larger values on the virtual I/O server as well.
[mkp: fix checkpatch warnings]
Signed-off-by: Brian King <brking@linux.ibm.com>
Link: https://lore.kernel.org/r/20240903134708.139645-2-brking@linux.ibm.com
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The header file linux/bio-integrity.h is included twice. Remove the last
one. The compilation test has passed.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240830075858.3541907-1-lihongbo22@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A previous change was introduced to prevent data loss during a power-on
reset when a tape is present inside the drive. This commit set the
"pos_unknown" flag to true to avoid operations that could compromise data
by performing actions from an untracked position. The relevant change is
commit 9604eea5bd ("scsi: st: Add third party poweron reset handling")
As a consequence of this change, a new issue has surfaced: the driver now
returns an "Input/output error" even for empty drives when the drive, host,
or bus is reset. This issue stems from the "flush_buffer" function, which
first checks whether the "pos_unknown" flag is set. If the flag is set, the
user will encounter an "Input/output error" until the tape position is
known again. This behavior differs from the previous implementation, where
empty drives were not affected at system start up time, allowing tape
software to send commands to the driver to retrieve the drive's status and
other information.
The current behavior prioritizes the "pos_unknown" flag over the
"ST_NO_TAPE" status, leading to issues for software that detects drives
during system startup. This software will receive an "Input/output error"
until a tape is loaded and its position is known.
To resolve this, the "ST_NO_TAPE" status should take priority when the
drive is empty, allowing communication with the drive following a power-on
reset. At the same time, the change should continue to protect data by
maintaining the "pos_unknown" flag when the drive contains a tape and its
position is unknown.
Signed-off-by: Rafael Rocha <rrochavi@fnal.gov>
Link: https://lore.kernel.org/r/20240905173921.10944-1-rrochavi@fnal.gov
Fixes: 9604eea5bd ("scsi: st: Add third party poweron reset handling")
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.12/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.12/scsi-queue
There are two functional changes:
smartpqi-add-fw-log-to-kdump
smartpqi-add-counter-for-parity-write-stream-requests
There are three minor bug fixes:
smartpqi-fix-stream-detection
smartpqi-fix-rare-system-hang-during-LUN-reset
smartpqi-fix-volume-size-updates
The other two patches add PCI-IDs for new controllers and change the
driver version.
This set of changes consists of:
* smartpqi-add-fw-log-to-kdump
During a kdump, the driver tells the controller to copy its logging
information to some pre-allocated buffers that can be analyzed
later.
This is a "feature" driven capability and is backward compatible
with existing controller FW.
This patch renames some prefixes for OFA (Online-Firmware Activation
ofa_*) buffers to host_memory_*. So, not a lot of actual functional
changes to smartpqi_init.c, mainly determining the memory size
allocation.
We added a function to notify the controller to copy debug data into
host memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the
actual handshaking is done.
* smartpqi-fix-stream-detection
Correct some false write-stream detections. The data structure used
to check for write-streams was not initialized to all 0's causing
some false write stream detections. The driver sends down streamed
requests to the raid engine instead of using AIO bypass for some
extra performance. (Potential full-stripe write verses Read Modify
Write).
False detections have not caused any data corruption. Found by
internal testing. No known externally reported bugs.
* smartpqi-add-counter-for-parity-write-stream-requests
Adding some counters for raid_bypass and write streams. These two
counters are related because write stream detection is only checked
if an I/O request is eligible for bypass (AIO).
The bypass counter (raid_bypass_cnt) was moved into a common
structure (pqi_raid_io_stats) and changed to type __percpu. The
write stream counter is (write_stream_cnt) has been added to this
same structure.
These counters are __percpu counters for performance. We added a
sysfs entry to show the write stream count. The raid bypass counter
sysfs entry already exists.
Useful for checking streaming writes. The change in the sysfs entry
write_stream_cnt can be checked during AIO eligible write
operations.
* smartpqi-add-new-controller-PCI-IDs
Adding support for new controller HW. No functional changes.
* smartpqi-fix-rare-system-hang-during-LUN-reset
We found a rare race condition that can occur during a LUN reset. We
were not emptying our internal queue completely.
There have been some rare conditions where our internal request
queue has requests for multiple LUNs and a reset comes in for one of
the LUNs. The driver waits for this internal queue to empty. We were
only clearing out the requests for the LUN being reset so the
request queue was never empty causing a hang.
The Fix:
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the
device undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Found by internal testing. No known externally reported bugs.
* smartpqi-fix-volume-size-updates
The current code only checks for a size change if there is also a
queue depth change. We are separating the check for queue depth and
the size changes.
Found by internal testing. No known bugs were filed.
* smartpqi-update-version-to-2.1.30-031
No functional changes.
Link: https://lore.kernel.org/r/20240827185501.692804-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver version to 2.1.30-031.
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-8-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct logical volume size changes by moving the check for a volume rescan
outside of the check for a queue depth change.
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-7-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a rare case where in a LUN reset occurs on a device and I/O
requests for other devices persist in the driver's internal request queue.
Part of a LUN reset involves waiting for our internal request queue to
empty before proceeding. The internal request queue contains requests not
yet sent down to the controller.
We were clearing the requests queued for the LUN undergoing a reset, but
not all of the queued requests. Causing a hang.
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the device
undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add sysfs entry to check for write stream requests.
Move existing raid_bypass_cnt into a structure named pqi_raid_io_stats and
add member write_stream_cnt. These two counters are related because write
stream detection is only checked if an I/O request is eligible for bypass
(AIO).
Example usage:
lsscsi
[15:1:0:0] disk Adaptec LOGICAL VOLUME 0129 /dev/sdae
cat /sys/block/sdae/device/ssd_smart_path_enabled
1
^
|
+---- NOTE: here bypass has been enabled on device sdae
To read the counter for parity write stream requests:
cat /sys/block/sdae/device/write_stream_cnt
0x60cd507
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct stream detection by initializing the structure
pqi_scsi_dev_raid_map_data to 0s.
When the OS issues SCSI READ commands, the driver erroneously considers
them as SCSI WRITES. If they are identified as sequential IOs, the driver
then submits those requests via the RAID path instead of the AIO path.
The 'is_write' flag might be set for SCSI READ commands also. The driver
may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs
being submitted through the RAID path.
Note: This does not cause data corruption.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add controller logs to kdump.
Driver allocates DMA memory and communicates this address to FW. In the
event of system crash, host driver notifies the firmware about the crash
and firmware posts all the necessary logs in the pre-allocated host buffer
for firmware debugging.
Once firmware notifies the completion of the log uploading to the host
memory and host continues with the OS crash dump saving.
This is a "feature" driven capability and is backward compatible with
existing controller FW.
Rename some prefixes for OFA (Online-Firmware Activation ofa_*) buffers to
host_memory_*. So, not a lot of actual functional changes to
smartpqi_init.c, mainly determining the memory size allocation.
Added a function to notify the controller to copy debug data into host
memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the actual
handshaking is done.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'del_list_entry' field in "struct fc_port" is unused.
The field was introduced in commit 2d70c103fd ("[SCSI] qla2xxx: Add LLD
target-mode infrastructure for >= 24xx series") in 2012-05 and the last
user was removed in commit 726b854870 ("qla2xxx: Add framework for async
fabric discovery") in 2017-02.
Remove this unused field.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69155321ab26c1f4d473d5bb6cd44b59b9b6a020.1724094686.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_urgent_bkops() is a wrapper function. It only calls
ufshcd_bkops_ctrl(). Remove it to simplify the ufs core driver. Replace any
references to ufshcd_urgent_bkops() with ufshcd_bkops_ctrl().
In addition, remove the second parameter in the ufshcd_bkops_ctrl() because
the information can be retrieved from the first parameter.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/0c7f2c8d68408e39c28e3e81addce09cc0ee3969.1724800328.git.quic_nguyenb@quicinc.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_driverbyte_string() has been unused since commit 54c2908619 ("scsi:
core: Drop the now obsolete driver_byte definitions"). Remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240826032005.4007834-1-cuigaosheng1@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Multiple SCSI drivers use snprintf() to format a workqueue name before
invoking one of the create*_workqueue() macros. This patch series
simplifies such code by passing the format string and arguments to
alloc_workqueue(). Additionally, the structure members that are only
used as a temporary buffer for formatting workqueue names are
removed. Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20240822195944.654691-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name. Remove the
work_q_name[] member from struct Scsi_Host because it is no longer
used by any SCSI driver nor by the SCSI core.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc*_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly. Not setting shost->work_q_name is safe because
there is no code that reads the value set by the removed code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_ordered_workqueue() format the workqueue name instead of
calling snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc_workqueue() format the workqueue name instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let alloc*_workqueue() format the workqueue names instead of calling
snprintf() explicitly.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The workqueue maintainer wants to remove the create*_workqueue() macros
because these macros always set the WQ_MEM_RECLAIM flag and because these
only support literal workqueue names. Hence this patch that replaces the
create*_workqueue() invocations with the definition of this macro. The
WQ_MEM_RECLAIM flag has been retained because I think that flag is necessary
for workqueues created by storage drivers. This patch has been generated by
running spatch and git clang-format. spatch has been invoked as follows:
spatch --in-place --sp-file expand-create-workqueue.spatch $(git grep -lEw 'create_(freezable_|singlethread_|)workqueue' */scsi */ufs)
The contents of the expand-create-workqueue.spatch file is as follows:
@@
expression name;
@@
-create_workqueue(name)
+alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_freezable_workqueue(name)
+alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1, name)
@@
expression name;
@@
-create_singlethread_workqueue(name)
+alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name)
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240822195944.654691-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 13247018d6 ("scsi: target: iscsi: Fix hang in the iSCSI login
code") removed iscsi_handle_login_thread_timeout() but left declaration.
Commit 3e1c81a95f ("iscsi-target: Refactor RX PDU logic + export request
PDU handling") left iscsi_target_get_initial_payload() declaration.
Commit d703ce2f7f ("iscsi/iser-target: Convert to command priv_size
usage") remove iscsit_alloc_cmd() but left declaration.
And finally, a few other declarations were never implenmented since
introduction in commit e48354ce07 ("iscsi-target: Add iSCSI fabric
support for target v4.1").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240810093437.2586476-1-yuehaibing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free.
Fixes: fcd427303e ("scsi: elx: libefc: SLI and FC PORT state machine interfaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b666ab26-6581-4213-9a3d-32a9147f0399@stanley.mountain
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS trace events are called exclusively from the UFS core drivers. Make
those events private to the core driver.
The MAINTAINERS file does not need updating as the maintainership remains
the same and the relevant directory is already covered.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240821055411.3128159-1-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "sz" variable needs to be a signed type for the error handling to work
as intended. Fortunately, there is some sanity checking on "sz" on the
next line, so negative values would be caught and it doesn't really affect
runtime.
Fixes: eab0dce11d ("scsi: ufs: ufshcd-pltfrm: Use of_property_count_u32_elems() to get property length")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/404a4727-89c6-410b-9ece-301fa399d4db@stanley.mountain
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>