Commit graph

9386 commits

Author SHA1 Message Date
David S. Miller
ed3ffaf7b5 [SPARC64]: Solidify check in cheetah_check_main_memory().
Need to make sure the address is below high_memory before
passing it to kern_addr_valid().

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 21:48:25 -07:00
David S. Miller
10147570f9 [SPARC64]: Kill all external references to sp_banks[]
Thus, we can mark sp_banks[] static in arch/sparc64/mm/init.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 21:46:43 -07:00
David S. Miller
0836a0eb40 [SPARC64]: Move phys_base, kern_{base,size}, and sp_banks[] init to paging_init
Also, move prom_probe_memory() into arch/sparc64/mm/init.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 21:38:08 -07:00
David S. Miller
801ab3c731 [SPARC]: Declare paging_init() in asm/pgtable.h
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 21:31:25 -07:00
David S. Miller
efdc1e2083 [SPARC64]: Simplify user fault fixup handling.
Instead of doing byte-at-a-time user accesses to figure
out where the fault occurred, read the saved fault_address
from the current thread structure.

For the sake of defensive programming, if the fault_address
does not fall into the user buffer range, simply assume the
whole area faulted.  This will cause the fixup for
copy_from_user() to clear the entire kernel side buffer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 21:06:47 -07:00
David S. Miller
5fd29752f0 [SPARC64]: Fix fault handling in unaligned trap handler.
We were not calling kernel_mna_trap_fault() correctly.
Instead of being fancy, just return 0 vs. -EFAULT from
the assembler stubs, and handle that return value as
appropriate.

Create an "__retl_efault" stub for assembler exception
table entries and use it where possible.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 20:41:45 -07:00
David S. Miller
8cf14af0a7 [SPARC64]: Convert to use generic exception table support.
The funny "range" exception table entries we had were only
used by the compat layer socketcall assembly, and it wasn't
even needed there.

For free we now get proper exception table sorting and fast
binary searching.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 20:21:11 -07:00
David S. Miller
705747ab87 [SPARC64]: Fix bug in unaligned load endianness swapping
The in-memory value was being swapped, not the value we
loaded into the register.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 16:48:40 -07:00
David S. Miller
d2212bc7db [SPARC64]: Add missing IDs for newer cpus.
Also, the us3_cpufreq driver can work on Ultra-IV and IV+.
They use the SAFARI bus register to control the clock divider
just like Ultra-III and III+ do.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 22:50:06 -07:00
David S. Miller
f16af555cc [SPARC64]: Add defines for 32MB/256MB PTE page size on Ultra-IV+.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 22:37:08 -07:00
Linus Torvalds
95001ee925 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-09-27 13:33:25 -07:00
Linus Torvalds
63906e41fe Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-09-27 13:32:33 -07:00
Krzysztof Benedyczak
5917583978 [PATCH] Make POSIX message queue sys_mq_open() honor umask
We ignored umask when creating new queues via mq_open (when creating
with open() on mqueue fs it is ok of course).  According to the
specification this a bug.  This trivial patch fixes this.

Signed-off-by: Krzysztof Benedyczak <golbi@mat.uni.torun.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-27 13:30:45 -07:00
David S. Miller
c8a6c29639 [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:38 -07:00
Michael Chan
f9804ddbee [TG3]: misc. fixes
Fix interrupt test handler by adding check for IRQ assertion in
PCI_STATE register in addition to the status block updated bit.

Add test for valid ethernet address in tg3_set_mac_addr().

Add tg3_bus_string() to setup the PCI bus speed/width string for all
PCI/PCIX/PCI Express devices. This is used to print the bus type
during init_one().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:10 -07:00
Michael Chan
c94e39418a [TG3]: 5780 PHY fixes
Fix 5780 PHY related problems:

1. MAC_RX_MODE reset must be done before setting up the MAC_MODE
   register on 5705_PLUS chips or the chip will stop receiving after
   a while. The MAC_RX_MODE reset is needed to prevent intermittently
   losing the first receive packet on serdes chips.

2. Skip MAC loopback test on 5780 because of hardware errata. Normal
   traffic including PHY loopback is not affected by the errata.

3. PHY loopback fails intermittently on 5708S and this is fixed by
   putting the PHY in loopback mode first before programming the MAC
   mode register. A MAC_RX_MODE reset is also added.

4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow
   nway_reset if 5780S is in parallel detect mode.

5. Add missing PHY IDs in KNOWN_PHY_ID() macro.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:12:42 -07:00
David S. Miller
667347f1ca [NEIGH]: Add debugging check when adding timers.
If we double-add a neighbour entry timer, which should be
impossible but has been reported, dump the current state of
the entry so that we can debug this.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:07:44 -07:00
Linus Torvalds
5c1f4cac6f Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2005-09-26 18:33:26 -07:00
Linus Torvalds
c6a519d2aa Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-09-26 18:32:48 -07:00
Linus Torvalds
bf0cbb3e42 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6 2005-09-26 18:31:36 -07:00
Al Viro
0b15569454 [PATCH] missing dependency on arm O= builds
arm maketools needs include/asm-arm in place in the build tree.
On normal builds it's always there, of course, but on O= it's created
(by generic code) too late - when we get to asm-offset.h.

	We used to get away with that by accident - creation of
include/asm-arm/arch symlink creates include/asm-arm and it happened
to go before maketools.  However, we did not have such dependency,
so that luck didn't last - now maketools is picked first and we are screwed.

	Both the symlink and maketools are prerequisites of the same
target (archprepare).  This fix is obvious - make the latter explicitly
depend on the former and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Al Viro
a880948b2b [PATCH] m32r: more basic __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Al Viro
c74dbac714 [PATCH] m32r: set CHECKFLAGS properly
We do _not_ need "sparse" in sparse arguments ;-)

What we do need is __BIG_ENDIAN__; right now unconditional, when m32r
starts using CPU_LITTLE_ENDIAN, we'll need to adjust.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Al Viro
24558a0f7a [PATCH] m32r: missing __iomem in ioremap() declaration
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Al Viro
ce3a161e69 [PATCH] useless includes of linux/irq.h in arch/i386
Most of these guys are simply not needed (pulled by other stuff
via asm-i386/hardirq.h).  One that is not entirely useless is hilarious -
arch/i386/oprofile/nmi_timer_int.c includes linux/irq.h... as a way to
get linux/errno.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Al Viro
7625d483a4 [PATCH] missing asm/irq.h (cs89x0)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:49 -07:00
David S. Miller
0dc4610698 [SPARC64]: Do not do TLB pre-filling any more.
In order to do it correctly on UltraSPARC-III+ and later we'd
need to add some complicated code to set the TAG access extension
register before loading the TLB.

Since this optimization gives questionable gains, it's best to
just remove it for now instead of adding the fix for Ultra-III+

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 16:12:18 -07:00
David S. Miller
c5bd50a953 [SPARC64]: Simplify Spitfire D-cache page flush.
It tries to batch up the tag loads and comparisons, and
then the stores.  And this is just complicated instead
of efficient.

Also, make the symbol of the Cheetah version more grepable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 16:06:03 -07:00
David S. Miller
56e9b26324 Merge master.kernel.org:/pub/scm/linux/kernel/git/acme/llc-2.6 2005-09-26 15:29:31 -07:00
Harald Welte
188bab3ae0 [NETFILTER]: Fix invalid module autoloading by splitting iptable_nat
When you've enabled conntrack and NAT as a module (standard case in all
distributions), and you've also enabled the new conntrack netlink
interface, loading ip_conntrack_netlink.ko will auto-load iptable_nat.ko.
This causes a huge performance penalty, since for every packet you iterate
the nat code, even if you don't want it.

This patch splits iptable_nat.ko into the NAT core (ip_nat.ko) and the
iptables frontend (iptable_nat.ko).  Threfore, ip_conntrack_netlink.ko will
only pull ip_nat.ko, but not the frontend.  ip_nat.ko will "only" allocate
some resources, but not affect runtime performance.

This separation is also a nice step in anticipation of new packet filters
(nf-hipac, ipset, pkttables) being able to use the NAT core.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 15:25:11 -07:00
David S. Miller
b85daee0e4 [AF_PACKET]: Remove bogus checks added to packet_sendmsg().
These broke existing apps, and the checks are superfluous
as the values being verified aren't even used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 15:23:58 -07:00
Herbert Xu
c62dba9011 [IPV6]: Fix [Bug 5306] Oops on IPv6 route lookup
> Steps to reproduce:
> 1. Boot Linux, do NOT setup any IPv6 routes
> 2. ip route get 2001::1 (or any unroutable address)

Well caught.  We never set rt6i_idev on ip6_null_entry.
This patch should make the problem go away.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 15:10:16 -07:00
Evgeniy Polyakov
acd042bb2d [CONNECTOR]: async connector mode.
If input message rate from userspace is too high, do not drop them,
but try to deliver using work queue allocation.

Failing there is some kind of congestion control.

It also removes warn_on on this condition, which scares people.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 15:06:50 -07:00
Alex Williamson
b9d717a7b4 [NET]: Make sure ctl buffer is aligned properly in sys_sendmsg().
It's on the stack and declared as "unsigned char[]", but pointers
and similar can be in here thus we need to give it an explicit
alignment attribute.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 14:28:02 -07:00
Vincent Sanders
819ccc86a4 [ARM] 2936/1: ixp4xx default config fixes
Patch from Vincent Sanders

A recent patch which made IXP4xx mach_desc's depend on config options
had the effect of not building the kernel for several machines it
possibly could be, this patch updates the default config to ensure all
possible machines are built for by default.

Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 19:52:57 +01:00
David Vrabel
6132f9e146 [ARM] 2935/1: ixp4xx: fix warnings in ixp4xx_set_irq_type
Patch from David Vrabel

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 19:52:56 +01:00
Anton Altaparmakov
e2fcc61ef0 NTFS: Re-fix sparse warnings in a more correct way, i.e. don't use an enum with
different types in it but #define the two constants instead.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26 17:02:41 +01:00
Russell King
cbf8fd9f5a [ARM] Remove SA_IRQNOMASK
SA_IRQNOMASK is unused, remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 15:30:20 +01:00
Kars de Jong
4fb7edce52 [PATCH] pcmcia: fix cross-platform issues with pcmcia module aliases
- Added a missing TO_NATIVE call to scripts/mod/file2alias.c:do_pcmcia_entry()
- Add an alignment attribute to struct pcmcia_device_no to solve an alignment
  issue seen when cross-compiling on x86 for m68k.

Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:13:58 +02:00
Dominik Brodowski
2570b74648 [PATCH] pcmcia: update ID for NinjaATA
Christian Zoz reported there are multiple NinjaATA devices all sharing the
second product ID string, but not the first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:31 +02:00
Daniel Ritz
f9cb8b71e7 [PATCH] yenta: more ENE bridges
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:29 +02:00
Dominik Brodowski
a42f0dc437 [PATCH] pcmcia: new IDs for serial_cs
Add new ID to serial_cs.c; the CIS fimware override is available by the
manufacturer at http://www.sierrawireless.com .  Remember to name the CIS
binary SW_7xx_SER.cis and to put it into /lib/firmware/

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:28 +02:00
Daniel Ritz
6c1a10dba9 [PATCH] yenta: add support for more TI bridges
Support some more TI cardbus bridges.  most of them are multifunction
devices which adds 1394 controllers, smartcard readers etc.  this could
also help with the various problems with the XX21 controllers seen on the
linux-pcmcia list.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:27 +02:00
Komuro
81000808b6 [PATCH] pcmcia: fix Kconfig dependency
TCIC depends on ISA.  It is used with ISA-bus system only.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:26 +02:00
Dominik Brodowski
8e5d17ebe4 [PATCH] yenta: tiny cleanup
pci_set_power_state is not needed, as we call pci_enable_device() somewhere
else.  Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted
to bus-centric view first.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:25 +02:00
Daniel Ritz
a413c09094 [PATCH] yenta: don't mess with bridge control register
In interrupt probing (both ISA and PCI) the bridge control register is used
to change interrupt routing to ISA or PCI by changing bit 7.  But this bit
only controls the routing of card functional interrupts, not the CSC
interrupts which are used for interrupt probing.

A bad side effect of messing with this register in yenta_probe_irq() is
that it can lead to irq storms if a card is inserted and already powered by
the BIOS.

Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:24 +02:00
Daniel Ritz
8c3520d4eb [PATCH] yenta: auto-tune EnE bridges for CardBus cards
Echo Audio cardbus products are known to be incompatible with EnE bridges.
in order to maybe solve the problem a EnE specific test bit has to be set,
another cleared...but other setups have a good chance to break when just
forcing the bits.  so do the whole thingy automatically.

The patch adds a hook in cb_alloc() that allows special tuning for the
different chipsets.  for ene just match the Echo products and set/clear the
test bits, defaults to do the same thing as w/o the patch to not break
working setups.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:09:20 +02:00
Anton Altaparmakov
e8c2cd99a3 Merge branch 'master' of /home/src/linux-2.6/ 2005-09-26 10:50:29 +01:00
Anton Altaparmakov
5a8c0cc32b NTFS: More $LogFile handling fixes: when chkdsk has been run, it can leave the
restart pages in the journal without multi sector transfer protection
      fixups (i.e. the update sequence array is empty and in fact does not
      exist).

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26 10:48:54 +01:00
Anton Altaparmakov
838bf9675a NTFS: Fix the definition of the CHKD ntfs record magic. It had an off by
two error causing it to be CHKB instead of CHKD.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26 10:45:46 +01:00