Replace GEM VRAM helpers with GEM SHMEM helpers in ast. Avoids OOM
errors when allocating video memory. Also adds support for dma-buf
functionality.
Aspeed display hardware supports display resolutions of FullHD and
higher at 32-bit pixel depth. But the amount of video memory is in
the range of 8 MiB to 32 MiB, which adds constraints to the actually
available resolutions. As atomic modesetting with VRAM helpers
requires double buffering in video memory, ast fails to pageflip
in some configurations. For example, FullHD with an active cursor
plane does not work on devices with 16 MiB of video memory.
Resolve this problem by converting the ast driver to GEM SHMEM helpers.
Keep the buffer objects in system memory and copy to video memory
on pageflips via shadow-plane helpers. Userspace used to require shadow
planes for decent performance, but that's now provided by the driver.
To replace the memory management, the patch also implements damage
handling for the primary plane.
With GEM SHMEM helpers, dma-buf import and export is now supported
by ast. This allows easier screen mirroring across devices or with
an Aspeed-based BMC. A corresponding feature request is available
at [1].
v2:
* fix typos in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/dri-devel/20220901124451.2523077-1-oushixiong@kylinos.cn/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-8-tzimmermann@suse.de
Rename some of the variables in the plane code to better reflect the
old and new state during checks and updates. Change some indention as
well. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-7-tzimmermann@suse.de
Rename the plane structure struct ast_cursor_plane to struct
ast_plane as it will be used for the primary plane as well. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-6-tzimmermann@suse.de
Update the cursor image via damage handling in-place. The cursor's
double buffering has no visible effect on the output, so remove it.
Done in preparation of switching ast to GEM SHMEM helpers. Removing
double buffering will allow us to use the same data structure for
primary and cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-5-tzimmermann@suse.de
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from ast.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in ast. It's also too late, as the atomic_check() of
the added planes will not be called before the commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-4-tzimmermann@suse.de
Always call drm_atomic_helper_check_plane_state() in each plane's
atomic_check function. At the minimum, it needs to set or clear the
plane state's 'visible' field. Otherwise the plane-state handling
is bogus and would keep updating planes that have been disabled.
While at it, also warn if the primary plane has been enabled, but is
not visible. This cannot legally happen as the plane always covers
the entire screen.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-3-tzimmermann@suse.de
Hold I/O-register lock in atomic_commit_tail to protect all pipeline
updates at once. Protects modesetting against concurrent EDID reads.
Complex modesetting operations involve mode changes and plane updates.
These steps used to be protected individually against concurrent I/O.
Make all this atomic wrt to reading display modes via EDID. The EDID
code in the connector's get_modes helper already acquires the necessary
lock.
A similar issue was fixed in commit 2d70b9a148 ("drm/mgag200: Acquire
I/O-register lock in atomic_commit_tail function") for mgag200.
v2:
* fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-2-tzimmermann@suse.de
The LCDIF includes a color space converter that supports YUV input. Use
it to support YUV planes, either through the converter if the output
format is RGB, or in conversion bypass mode otherwise.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-5-laurent.pinchart@ideasonboard.com
Up to and including v1.3, HDMI supported limited quantization range only
for YCbCr. HDMI v1.4 introduced selectable quantization ranges, but this
feature isn't supported in the dw-hdmi driver that is used in
conjunction with the LCDIF in the i.MX8MP. The HDMI YCbCr output is thus
always advertised in the AVI infoframe as limited range.
The LCDIF driver, on the other hand, configures the CSC to produce full
range YCbCr. This mismatch results in loss of details and incorrect
colours. Fix it by switching to limited range YCbCr.
The coefficients are copied from drivers/media/platforms/nxp/imx-pxp.c
for coherency, as the hardware is most likely identical.
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-4-laurent.pinchart@ideasonboard.com
The BIT() macro is meant to represent a single bit. Don't use it for
values of register fields that span multiple bits.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-3-laurent.pinchart@ideasonboard.com
A couple of the register macro values are incorrectly indented. Fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930083955.31580-2-laurent.pinchart@ideasonboard.com
All DRM formats assume little-endian byte order. On big-endian systems,
it is likely that the scanout buffer is in big endian as well. Update
the format accordingly and add endianness conversion to the format-helper
library. Also opt-in to allocated buffers in host format by default.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
Support the CRTC's color-management property and implement each model's
palette support.
The OF hardware has different methods of setting the palette. The
respective code has been taken from fbdev's offb and refactored into
per-model device functions. The device functions integrate this
functionality into the overall modesetting.
As palette handling is a CRTC property that depends on the primary
plane's color format, the plane's atomic_check helper now updates the
format field in ofdrm's custom CRTC state. The CRTC's atomic_flush
helper updates the palette for the format as needed.
v4:
* use cpu_to_be32() (Geert)
v3:
* lookup CRTC state with drm_atomic_get_new_crtc_state()
* access HW palette with writeb(), writel(), and readl() (Ben)
* declare register values as u32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
Add a per-model device-function structure in preparation of adding
color-management support. Detection of the individual models has been
taken from fbdev's offb.
v3:
* define constants for PCI ids (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
Open Firmware provides basic display output via the 'display' node.
DT platform code already provides a device that represents the node's
framebuffer. Add a DRM driver for the device. The display mode and
color format is pre-initialized by the system's firmware. Runtime
modesetting via DRM is not possible. The display is useful during
early boot stages or as error fallback.
Similar functionality is already provided by fbdev's offb driver,
which is insufficient for modern userspace. The old driver includes
support for BootX device tree, which can be found on old 32-bit
PowerPC Macintosh systems. If these are still in use, the
functionality can be added to ofdrm or implemented in a new
driver. As with simpledrm, the fbdev driver cannot be selected if
ofdrm is already enabled.
Two notable points about the driver:
* Reading the framebuffer aperture from the device tree is not
reliable on all systems. Ofdrm takes the heuristics and a comment
from offb to pick the correct range.
* No resource management may be tied to the underlying PCI device.
Otherwise the handover to the native driver will fail with a resource
conflict. PCI management is therefore done as part of the platform
device's cleanup.
The driver has been tested on qemu's ppc64le emulation. The device
hand-over has been tested with bochs.
v5:
* use drm_atomic_helper_check_crtc_primary_plane()
v4:
* set preferred depth to the correct value
* set bpp value for console emulation
* output scanout-buffer parameters with drm_dbg()
v3:
* reintegrate FWFB helpers into ofdrm
* use damage iterator
* sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access()
* fix various atomic_check helpers
* remove CRTC atomic_{enable,disable} (Javier)
* compute stride with drm_format_info_min_pitch() (Daniel)
v2:
* removed simple-pipe helpers
* built driver on top of FWFB helpers
* merged all init code into single function
* make PCI support optional (Michal)
* support COMPILE_TEST (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
convert
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
adv7533 bridge tries to dynamically switch lanes based on the
mode by detaching and attaching the mipi dsi device.
This approach is incorrect because this method of dynamic switch of
detaching and attaching the mipi dsi device also results in removing
and adding the component which is not necessary.
This approach is also prone to deadlocks. So for example, on the
db410c whenever this path is executed with lockdep enabled,
this results in a deadlock due to below ordering of locks.
-> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
lock_acquire+0x6c/0x90
drm_modeset_acquire_init+0xf4/0x150
drmm_mode_config_init+0x220/0x770
msm_drm_bind+0x13c/0x654
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x174
component_add+0x18/0x2c
dsi_dev_attach+0x24/0x30
dsi_host_attach+0x98/0x14c
devm_mipi_dsi_attach+0x38/0xb0
adv7533_attach_dsi+0x8c/0x110
adv7511_probe+0x5a0/0x930
i2c_device_probe+0x30c/0x350
really_probe.part.0+0x9c/0x2b0
__driver_probe_device+0x98/0x144
driver_probe_device+0xac/0x14c
__device_attach_driver+0xbc/0x124
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x90/0xd0
process_one_work+0x28c/0x6b0
worker_thread+0x240/0x444
kthread+0x110/0x114
ret_from_fork+0x10/0x20
-> #0 (component_mutex){+.+.}-{3:3}:
__lock_acquire+0x1280/0x20ac
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x6c/0x90
__mutex_lock+0x84/0x400
mutex_lock_nested+0x3c/0x70
component_del+0x34/0x170
dsi_dev_detach+0x24/0x30
dsi_host_detach+0x20/0x64
mipi_dsi_detach+0x2c/0x40
adv7533_mode_set+0x64/0x90
adv7511_bridge_mode_set+0x210/0x214
drm_bridge_chain_mode_set+0x5c/0x84
crtc_set_mode+0x18c/0x1dc
drm_atomic_helper_commit_modeset_disables+0x40/0x50
msm_atomic_commit_tail+0x1d0/0x6e0
commit_tail+0xa4/0x180
drm_atomic_helper_commit+0x178/0x3b0
drm_atomic_commit+0xa4/0xe0
drm_client_modeset_commit_atomic+0x228/0x284
drm_client_modeset_commit_locked+0x64/0x1d0
drm_client_modeset_commit+0x34/0x60
drm_fb_helper_lastclose+0x74/0xcc
drm_lastclose+0x3c/0x80
drm_release+0xfc/0x114
__fput+0x70/0x224
____fput+0x14/0x20
task_work_run+0x88/0x1a0
do_exit+0x350/0xa50
do_group_exit+0x38/0xa4
__wake_up_parent+0x0/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x30/0xc0
el0_svc+0x58/0x100
el0t_64_sync_handler+0x1b0/0x1bc
el0t_64_sync+0x18c/0x190
Due to above reasons, remove the dynamic lane switching
code from adv7533 bridge chip and filter out the modes
which would need different number of lanes as compared
to the initialization time using the mode_valid callback.
This can be potentially re-introduced by using the pre_enable()
callback but this needs to be evaluated first whether such an
approach will work so this will be done with a separate change.
changes since RFC:
- Fix commit text and add TODO comment
changes in v2:
- Fix checkpatch formatting errors
Fixes: 62b2f026cd ("drm/bridge: adv7533: Change number of DSI lanes dynamically")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com
Provides a default CRTC state check handler for CRTCs that only have one
primary plane attached.
There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a CRTC helper and
make drivers use it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-5-javierm@redhat.com
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from ssd130x.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in ssd130x. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-4-javierm@redhat.com
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from simpledrm.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in simpledrm. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-3-javierm@redhat.com
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from mgag200.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in mgag200. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-2-javierm@redhat.com
When build Linux kernel with 'make C=2', encounter the following warnings:
./drivers/gpu/drm/nouveau/dispnv50/disp.c:134:34: warning: cast removes address space '__iomem' of expression
./drivers/gpu/drm/nouveau/dispnv50/disp.c:197:34: warning: cast removes address space '__iomem' of expression
The data type of dmac->_push.mem.object.map.ptr is 'void __iomem *', but
converted to 'u32 *' directly and cause above warnings, now
recover their data types to fix these warnings.
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220924092516.10007-1-ruanjinjie@huawei.com
While it takes more vertical space, sorted build lists with one object
per line are arguably easier to manage, especially when there are
conflicting changes.
Split anything with more than one object file.
v2: also split drm_cache.o and put it after drm_bridge.o (Andi)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011140830.3257655-1-jani.nikula@intel.com
Soft reset during tc_bridge_enable() is triggered by setting all available
reset control bits in the SYSRST register.
But as noted in the data sheet resetting the i2c-slave controller should
be only done over DSI and is only useful for chip debugging.
So do not set RSTI2CS (bit0).
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901131951.1116512-1-t.remmet@phytec.de
PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma
subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings.
This commit makes the driver actually use the proper VEC preset for this
mode instead of just changing PAL subcarrier frequency.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-25-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
It is fairly common for named video modes to contain dashes (e.g.
"tt-mid" on Atari, "dblntsc-ff" on Amiga). Currently such mode names
are not recognized, as the dash is considered to be a separator between
mode name and bpp.
Fix this by skipping any dashes that are not followed immediately by a
digit when looking for the separator.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-13-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Some video= options might have a value that contains a dash. However, the
command line parsing mode considers all dashes as the separator between the
mode and the bpp count.
Let's rework the parsing code a bit to only consider a dash as the bpp
separator if it before a comma, the options separator.
A follow-up patch will add a unit-test for this once such an option is
introduced.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-12-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The subconnector property was created by drm_mode_create_tv_properties(),
but wasn't exposed to the userspace through the generic
atomic_get/set_property implementation, and wasn't stored in any generic
state structure.
Let's solve this.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-6-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
There is two TV subconnector related properties registered by
drm_mode_create_tv_properties(): subconnector and select subconnector.
While the select subconnector property is stored in the kernel by the
drm_tv_connector_state structure, the subconnector property isn't stored
anywhere.
Worse, the select subconnector property is stored in a field called
subconnector, creating some ambiguity about which property content we're
accessing.
Let's rename that field to one called select_subconnector to make it move
obvious what it's about.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-5-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
We currently have two sets of TV properties.
The first one is there to deal with analog TV properties, creating
properties such as the TV mode, subconnectors, saturation, hue and so on.
It's created by calling the drm_mode_create_tv_properties() function.
The second one is there to deal with properties that might be useful on a
TV, creating the overscan margins for example. It's created by calling the
drm_mode_create_tv_margin_properties().
However, we also have a drm_atomic_helper_connector_tv_reset() function
that will reset the TV margin properties to their default values, and thus
is supposed to be called for the latter set. This creates an ambiguity due
to the inconsistent naming.
We can thus rename the drm_atomic_helper_connector_tv_reset() function to
drm_atomic_helper_connector_tv_margins_reset() to remove that ambiguity
and hopefully make it more obvious.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-4-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Since we've recently added a ton of tests, the list starts to be a bit
of a mess and creates unneeded conflicts.
Let's order it alphabetically.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v4-2-60d38873f782@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
In drm_atomic_helper_check_crtc_state(), do not add a new plane state
to the global state if it does not exist already. Adding a new plane
state will result in overhead for the plane during the atomic-commit
step.
For the test in drm_atomic_helper_check_crtc_state() to succeed, it
is important that the CRTC has an enabled primary plane after the
commit. Simply testing the CRTC state's plane_mask for a primary plane
is sufficient.
Note that the helper still only tests for an attached primary plane.
Drivers have to ensure that the plane contains valid pixel information.
v5:
* fix commit description (Javier)
v3:
* test for a primary plane in plane_mask (Ville)
v2:
* remove unnecessary test for plane->crtc (Ville)
* inline drm_atomic_get_next_plane_state() (Ville)
* acquire plane lock before accessing plane->state (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: d6b9af1097 ("drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-2-tzimmermann@suse.de
Add register constants for the framebuffer scanout addresses and
update the related helper functions. No functional changes.
v2:
* extract address bytes with helper macros (Javier)
* fix comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-16-tzimmermann@suse.de
Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.
As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.
v2:
* clarify commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
Add drm_dev_enter() and drm_dev_exit() to the various modesetting
functions that interact with the device. After hot-unplugging the
device, these functions will return early. So far, the udl driver
relied on USB interfaces to handle unplugging of the device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-10-tzimmermann@suse.de
Inline a modesetting helper in the CRTC's enable function. Build the
command set directly in the USB URB's buffer and drop an intermediate
buffer. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-9-tzimmermann@suse.de
Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.
The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.
v2:
* don't use the atomic_disable plane helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
Add style fixes, better error handling and reporting, and minor
clean-up changes to the connector code before moving the code to
the rest of the modesetting pipeline.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-5-tzimmermann@suse.de
Set the USB control-message timeout to the USB default of 5 seconds.
Done for consistency with other uses of usb_control_msg() in udl and
other drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-4-tzimmermann@suse.de
The sku_pixel_limit is a per-device property, similar to the amount
of available video memory. Move the respective mode-valid test from
the connector to the mode-config structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-3-tzimmermann@suse.de
The tile status modifiers can be combined with all of the usual
color buffer modifiers. When they are present an additional plane
is added to the surfaces to share the tile status buffer. The
TS modifiers describe the interpretation of the tag bits in this
buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de
